Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Continuous Lubricant Film Thickness Measurement Between Piston Ring and Cylinder Bore

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, vol.140, no.7, 2018 (Journal Indexed in SCI) identifier identifier

The Effects of Piston Skirt Profiles on Secondary Motion and Friction

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, vol.136, no.6, 2014 (Journal Indexed in SCI) identifier identifier

The Effect of Cylinder Bore Distortion on Lube Oil Consumption and Blow-By

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, vol.136, no.1, 2014 (Journal Indexed in SCI) identifier identifier

Frictional Characteristics of IF-WS2 Nanoparticles in Simulated Engine Conditions

TRIBOLOGY TRANSACTIONS, vol.53, no.6, pp.939-947, 2010 (Journal Indexed in SCI) identifier identifier

Reduced oil consumption by laser surface texturing on cylinders

SAE International Journal of Commercial Vehicles, vol.1, no.1, pp.446-453, 2009 (Journal Indexed in SCI Expanded) identifier

Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part II - Correlation with bench test data

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, vol.123, no.1, pp.219-223, 2001 (Journal Indexed in SCI) identifier identifier

Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part I - Analytical results

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, vol.123, no.1, pp.211-218, 2001 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Collision Avoidance Via Emergency Steering Warning System: A Driving Simulator Approach

Politeknik Dergisi, vol.22, no.1, pp.327-333, 2019 (National Refreed University Journal)

A Multiscale Cylinder Bore Honing Pattern Lubrication Model for Improved Engine Friction

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS, vol.12, no.3, pp.155-166, 2019 (Journal Indexed in ESCI) identifier identifier

Influence of Rib Stiffener Design Parameters on the Noise Radiation of an Engine Block

SAE INTERNATIONAL JOURNAL OF ENGINES, vol.12, no.2, pp.175-184, 2019 (Journal Indexed in ESCI) identifier identifier

Motorlarda Plazma Sprey Kaplı Silindirlerin Tribolojik Özellikleri

Mühendis ve Makina, no.486, pp.30-33, 2000 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

Bir Toplu Taşıma Otobüsü İçin Yakıt Ekonomisi Sağlayacak Vites Seçim Algoritması

IMSMATEC 2019 - The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Turkey, 21 - 23 June 2019

Pozitif Eğimli Kısımlar İçeren Yollar İçin Ekonomik Seyir Sağlayacak Hız Profillerinin Oluşturulması

Çukurova Uluslararası Multidisipliner Çalışmalar Kongresi, Adana, Turkey, 13 - 16 December 2018

Ride Dynamics of an Off-road Vehicle with Hydro-Pneumatic Suspension System

9th International Automotive Technologies Congress”, OTEKON 2018, Bursa, Turkey, 7 - 08 May 2018, pp.1-9

Continuous Lubricant Film Thickness Measurement Between Piston Ring and Cylinder Bore

ASME Internal Combustion Engine Division 2017 Fall Technical Conference ICEF2017, Seattle, United States Of America, 15 - 18 October 2017, pp.1-8

Cylinder Bore Honing Pattern Optimization for Improved Engine Friction and Wear

44th Leeds-Lyon Symposium on Tribology, Lyon, France, 4 - 06 September 2017, pp.118

Estimation of Tire Model Parameters From Transient Test Data

AVTECH’15 III. Automotive and Vehicle Technologies Conference, İstanbul, Turkey, 23 - 24 November 2015, pp.82

DEVELOPMENT OF A PISTON SECONDARY MOTION MODEL FOR SKIRT FRICTION ANALYSIS

ASME Internal Combustion Engine Division Fall Technical Conference, Vancouver, Canada, 23 - 26 September 2012, pp.963-970 identifier identifier

THE EFFECT OF CYLINDER BORE DISTORTION ON LUBE OIL CONSUMPTION AND BLOW-BY

11th ASME Biennial Conference on Engineering Systems Design and Analysis, (ESDA 2012), Nantes, France, 2 - 04 July 2012, pp.665-674 identifier

FRICTIONAL CHARACTERISTICS OF IF-WS(2) NANOPARTICLES IN SIMULATED ENGINE CONDITIONS

ASME/STLE International Joint Tribology Conference, Tennessee, United States Of America, 19 - 21 October 2009, pp.261-263 identifier

The effects of power cylinder design parameters on lube oil consumption of a heavy duty diesel engine

ASME Internal Combustion Engine Division Sprint Technical Conference, Illinois, United States Of America, 27 - 30 April 2008, pp.299-307 identifier identifier

The Effects of Leaf Spring and Bushing Stiffness Characteristics on Vehicle Handling

OTEKON’06, Otomotiv Teknolojileri Kongresi, Bursa, Turkey, 26 - 28 June 2006, pp.361-368

Frictional characteristics of plasma spray coated cylinder bores

International Congress and Exposition, Detroit, MI, United States Of America, 1 - 04 March 1999 identifier

A new experimental technique for friction simulation in automotive piston ring and cylinder liners

International Spring Fuels and Lubricants Meeting and Exposition, Dearborn, MI, United States Of America, 4 - 06 May 1998 identifier