Prof.Dr. Mustafa Bakkal

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Tribo-corrosion behavior of electroplating, nitrocarburizing, and QPQ processes on barrel finishing

Yücel A. H., Yilmaz A., Bakkal M., Kuzu A. T.

Materialpruefung/Materials Testing , cilt.65, sa.11, ss.1713-1720, 2023 (SCI-Expanded)

The development of a hybrid cutting model for workpiece temperature distribution via advection heat partition approach

Kara M. E., Kuzu A. T., Bakkal M.

International Journal of Advanced Manufacturing Technology , cilt.126, sa.9-10, ss.4283-4295, 2023 (SCI-Expanded)

Fatigue behavior and self-heating mechanism of novel glass fiber reinforced thermoplastic composite

Bakkal M., Kayıhan M., Timur A., Parlar Z., Güleryüz Parasız C. G., Yücel A. H., et al.

ADVANCED COMPOSITE MATERIALS , cilt.0, sa.0, ss.1-17, 2023 (SCI-Expanded)

Investigation of Residual Stresses Induced by Milling of Compacted Graphite Iron by x-ray Diffraction Technique

Kara M. E., Kuzu A. T., Bakkal M.

Journal of Materials Engineering and Performance , 2023 (SCI-Expanded)

Backward tube spinning mechanics

Sariyarlioglu E. C., Music Ö., Bakkal M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.123, sa.1-2, ss.479-491, 2022 (SCI-Expanded)

Effect of surface treatments on the interfacial strength for metal/composite hybrid joints

Bakkal M., Osmanoglu H., BODUR M. S.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.37, sa.2, ss.1033-1045, 2022 (SCI-Expanded)

Temperature variation depending on cutting conditions and its effects on thrust force in micro-drilling of CFRP laminates

Dogrusadik A., KENTLİ A., Bakkal M., Çakan M.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.65, sa.2, ss.152-168, 2022 (SCI-Expanded)

Experimental analysis on drilling of Al/Ti/CFRP hybrid composites

Kayıhan M., Karaguzel U., Bakkal M.

MATERIALS AND MANUFACTURING PROCESSES , cilt.36, sa.2, ss.215-222, 2021 (SCI-Expanded)

Photostabilizers performance on the surface analysis of green composites

Sonmez H. E., Bodur M. S., Baysan A. A., Bakkal M., Serhatlı İ. E.

POLYMERS & POLYMER COMPOSITES , cilt.29, sa.1, ss.57-64, 2021 (SCI-Expanded)

Effect of scanning strategies and laser parameters on metal-composite joining

Kuzu A. T., Karaguzel U., Erbay B., Bakkal M.

MATERIALS AND MANUFACTURING PROCESSES , cilt.36, sa.10, ss.1199-1207, 2021 (SCI-Expanded)

A study on the photostabilizer additives on the textile fiber reinforced polymer composites: Mechanical, thermal, and physical analysis

BODUR M. S., BAKKAL M., SONMEZ H. E.

Polymer Engineering And Science , cilt.58, ss.1082-1090, 2018 (SCI-Expanded)

Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face

CAKİR E., Ozlu E., Bakkal M., Budak E.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.96, ss.81-89, 2018 (SCI-Expanded)

Dry and minimum quantity lubrication high-throughput drilling of compacted graphite iron

Wu W., Kuzu A., STEPHENSON D., HONG J., Bakkal M., Shih A.

MACHINING SCIENCE AND TECHNOLOGY , cilt.22, sa.4, ss.652-670, 2018 (SCI-Expanded)

Water absorption behavior and kinetics of glass fiber/waste cotton fabric hybrid composites

Bodur M. S., Englund K., Bakkal M.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.134, sa.47, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

The thermal modeling of deep-hole drilling process under MQL condition

Kuzu A. T., Berenji K. R., Ekim B. C., Bakkal M.

JOURNAL OF MANUFACTURING PROCESSES , cilt.29, ss.194-203, 2017 (SCI-Expanded)

Experimental study on the glass fiber/waste cotton fabric-reinforced hybrid composites: Mechanical and rheological investigations

Bodur M. S., Bakkal M., Englund K.

JOURNAL OF COMPOSITE MATERIALS , cilt.51, sa.23, ss.3257-3268, 2017 (SCI-Expanded)

Properties of Sound Panels Made from Recycled Footwear Treads

YILDIZ F., Parlar A. G., Parlar Z., Bakkal M.

ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.936-940, 2017 (SCI-Expanded)

An Investigation for the Effect of Recycled Matrix on the Properties of Textile Waste Cotton Fiber Reinforced (T-FRP) Composites

Bodur M. S., Sonmez H. E., Bakkal M.

POLYMER COMPOSITES , cilt.38, sa.7, ss.1231-1240, 2017 (SCI-Expanded)

The effect of chemical treatment methods on the outdoor performance of waste textile fiber-reinforced polymer composites

Bakkal M., Bodur M. S., Sonmez H. E., Ekim B. C.

JOURNAL OF COMPOSITE MATERIALS , cilt.51, sa.14, ss.2009-2021, 2017 (SCI-Expanded)

Modelling thermally induced deformations on tool during turn-milling

Karaguzel U., Bakkal M., BUDAK E.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.32, sa.3, ss.865-875, 2017 (SCI-Expanded)

The effects of different chemical treatment methods on the mechanical and thermal properties of textile fiber reinforced polymer composites

Bodur M. S., Bakkal M., SONMEZ H. E.

JOURNAL OF COMPOSITE MATERIALS , cilt.50, sa.27, ss.3817-3830, 2016 (SCI-Expanded)

The effect of cutting parameters and tool geometry on machinability of cotton-fiber reinforced polymer composites: Cutting forces, burr formation, and chip morphology

Kuzu A. T., Bakkal M.

JOURNAL OF INDUSTRIAL TEXTILES , cilt.45, sa.6, ss.1364-1382, 2016 (SCI-Expanded)

Effects of tool axis offset in turn-milling process

Karaguzel U., Uysal E., Budak E., Bakkal M.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.231, ss.239-247, 2016 (SCI-Expanded)

Thermal and force modeling of CGI drilling

Kuzu A. T., BERENJI K. R., Bakkal M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.82, ss.1649-1662, 2016 (SCI-Expanded)

An experimental study on grinding of Zr-based bulk metallic glass

Bakkal M., SERBEST E., KARIPCIN I., KUZU A. T., KARAGUZEL U., Derin B.

Advances in Manufacturing , cilt.3, sa.4, ss.282-291, 2015 (SCI-Expanded)

EXPERIMENTAL INVESTIGATIONS OF MACHINABILITY IN THE TURNING OF COMPACTED GRAPHITE IRON USING MINIMUM QUANTITY LUBRICATION

Kuzu A. T., BIJANZAD A., Bakkal M.

MACHINING SCIENCE AND TECHNOLOGY , cilt.19, sa.4, ss.559-576, 2015 (SCI-Expanded)

Analytical modeling of turn-milling process geometry, kinematics and mechanics

Karaguzel U., Uysal E., Budak E., Bakkal M.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.91, ss.24-33, 2015 (SCI-Expanded)

Increasing tool life in machining of difficult-to-cut materials using nonconventional turning processes

Karaguzel U., Olgun U., Uysal E., Budak E., Bakkal M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.77, ss.1993-2004, 2015 (SCI-Expanded)

A new approach for the development of textile waste cotton reinforced composites (T-FRP): laminated hybridization vs. coupling agents

Bodur M. S., Bakkal M., SAVAS M., BERKALP Ö. B.

JOURNAL OF POLYMER ENGINEERING , cilt.34, sa.7, ss.639-648, 2014 (SCI-Expanded)

AUTONOMOUS HOLE QUALITY DETERMINATION USING IMAGE PROCESSING TECHNIQUES

KUZU A. T., Kaveh R B., Seta b., GÖKAŞAN M., Bakkal M.

Proceedings of the IEEE International Symposium on Industrial Electronics , cilt.0, ss.966-971, 2014 (SCI-Expanded)

Utilization of various non-woven waste forms as reinforcement in polymeric composites

Yalcin I., SADIKOGLU T. G., BERKALP Ö. B., Bakkal M.

TEXTILE RESEARCH JOURNAL , cilt.83, sa.15, ss.1551-1562, 2013 (SCI-Expanded)

The effect of reprocessing on the mechanical properties of the waste fabric reinforced composites

Bakkal M., BODUR M. S., Berkalp Ö. B., Yılmaz Ş.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.212, sa.11, ss.2541-2548, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma

FINITE ELEMENT MODELING OF RANDOM WASTE COTTON FIBER REINFORCED POLYETHYLENE COMPOSITES

GERIKALMAZ S., Yılmaz Ş., Bakkal M., Berkalp Ö. B.

TEKSTIL VE KONFEKSIYON , cilt.22, sa.4, ss.293-300, 2012 (SCI-Expanded)

The Effects of Tool Geometry on Machinability of Textile Fabric Reinforced Termoplastic Matrix Composites

Bakkal M.

Advanced Materials Research , cilt.0, sa.445, ss.841-846, 2012 (SCI-Expanded)

Oxidation and crystallization of Zr-based bulk metallic glass due to machining

Bakkal M., LIU C., WATKINS T., SCATTERGOOD R., SHIH A.

INTERMETALLICS , cilt.12, sa.2, ss.195-204, 2004 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Sıcak Dövme Kalıplarına Infrared (Kızıl Ötesi) Yöntemi ile Ön Isıtma Uygulanmasına Yönelik Deneysel ve Teorik Analiz

KARAGÜZEL U., KUZU A. T., Korap V., Çilingir H., BAKKAL M.

Makina Tasarım ve İmalat Dergisi , cilt.18, sa.1, ss.9-23, 2020 (Hakemli Dergi)

Young's modulus estimation techniques for the randomly oriented natural fiber reinforced composites: Finite element analysis and analytical models

Bodur M. S., Bakkal M.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.25, sa.4, ss.454-461, 2019 (ESCI)

Improving Performance of Turn milling by Controlling Forces and Thermally Induced Tool center Point TCP Displacement

Putz M., Ihlenfeldt S., KARAGÜZEL U., Semmler U., BUDAK E., BAKKAL M., et al.

Procedia CIRP , cilt.40, ss.481-485, 2016 (Hakemli Dergi)

Effect of Recycled LDPE Matrix on the Properties of Waste Cotton Fiber Reinforced WCF R Composites

BODUR M. S., HASRET ECE S., BERKALP Ö. B., BAKKAL M.

Usak University Journal of Material Sciences , cilt.1, ss.135-141, 2014 (Hakemli Dergi)

Machinability of BMG

Bakkal M.

INNOVATION IN MATERIALS SCIENCE II , cilt.521, ss.225-253, 2012 (Scopus)

Metrikler

Yayın

Atıf (WoS)

811

H-İndeks (WoS)

Atıf (Scopus)

956

H-İndeks (Scopus)

Proje

Fikri Mülkiyet

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler