Prof.Dr. Murat Baydoğan

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt.% Si-10 wt.% TiB2 composites produced by sequential milling and pressureless sintering

Tekoglu E., Yurekturk Y., Ağaoğulları D., Dilawary S. A. A., Baydoğan M., Öveçoğlu M. L.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.110, sa.11, ss.1047-1057, 2019 (SCI-Expanded)

A novel fabrication method for a TiO2 layer over CoCr alloy

Çetiner D., Paksoy A. H., Tazegül O., Baydoğan M., GÜLERYÜZ H., Çimenoğlu H., et al.

SURFACE ENGINEERING , cilt.35, sa.3, ss.234-241, 2019 (SCI-Expanded)

Effect of aluminizing and austempering processes on structural, mechanical and wear properties of a SSF ductile iron

YÜREKTÜRK Y., Baydoğan M.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.1, 2019 (SCI-Expanded)

Thermal Oxidation of Cold Sprayed Titanium-Based Coating Deposited on Co-Cr Alloy

Çetiner D., Paksoy A. H., Tazegül O., Baydoğan M., GÜLERYÜZ H., Çimenoğlu H., et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY , cilt.27, sa.8, ss.1414-1427, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Quantitative comparison of a laterally misplaced pedicle screw with a re-directed screw. How much pull-out strength is lost?

KORKMAZ M., Sanyilmaz K., Ozkunt O., Gemalmaz H. C., Akgul T., Sungur M., et al.

ACTA ORTHOPAEDICA ET TRAUMATOLOGICA TURCICA , cilt.52, sa.6, ss.459-463, 2018 (SCI-Expanded)

Surface modification of Ti6Al4V by micro-arc oxidation in AgC2H3O2-containing electrolyte

Aydogan D. T., Muhaffel F., Acar O. K., Topcuoglu E. N., Kulekci H. G., Kose G. T., et al.

SURFACE INNOVATIONS , cilt.6, ss.277-285, 2018 (SCI-Expanded)

Characterization of ferritic ductile iron subjected to successive aluminizing and austempering

YÜREKTÜRK Y., Baydoğan M.

SURFACE & COATINGS TECHNOLOGY , cilt.347, ss.142-149, 2018 (SCI-Expanded)

Effect of processing parameters on electropolishing of commercially pure Ti in an alcohol-based electrolyte

Altay M., Baydogan M.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING , cilt.96, sa.3, ss.163-168, 2018 (SCI-Expanded)

A new multipartite plate system for anterior cervical spine surgery; finite element analysis

Simsek H., Zorlu E., Kaya S., Baydoğan M., Atabey C., Colak A.

BRITISH JOURNAL OF NEUROSURGERY , cilt.32, sa.3, ss.276-282, 2018 (SCI-Expanded)

Optimisation of micro-arc oxidation electrolyte for fabrication of antibacterial coating on titanium

Aydogan D. T., Muhaffel F., Kilic M. M., Acar O. K., Cempura G., Baydoğan M., et al.

MATERIALS TECHNOLOGY , cilt.33, sa.2, ss.119-126, 2018 (SCI-Expanded)

An experimental study on fire damage of structural steel members in an industrial building

Piroglu F., Baydoğan M., Özakgül K.

ENGINEERING FAILURE ANALYSIS , cilt.80, ss.341-351, 2017 (SCI-Expanded)

Effect of Microstructural Features on Mechanical and Magnetic Properties of Austempered High-silicon Ductile Irons

Yürektürk Y., Baydoğan M.

ISIJ INTERNATIONAL , cilt.57, sa.11, ss.2049-2057, 2017 (SCI-Expanded)

Comparison of fixation techniques in Vancouver type AG periprosthetic femoral fracture: a biomechanical study

Sariyilmaz K., Korkmaz M., Ozkunt O., Gemalmaz H. C., Sunguill M., Baydoğan M., et al.

ACTA ORTHOPAEDICA ET TRAUMATOLOGICA TURCICA , cilt.50, sa.3, ss.373-378, 2016 (SCI-Expanded)

Optimization of Thixoforging Parameters for C70S6 Steel Connecting Rods

Özkara İ. M., Baydoğan M.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.25, sa.11, ss.5020-5029, 2016 (SCI-Expanded)

Characterization of micro arc oxidized 6082 aluminum alloy in an electrolyte containing carbon nanotubes

Yurekturk Y., Muhaffel F., BAYDOGAN M.

SURFACE & COATINGS TECHNOLOGY , cilt.269, ss.83-90, 2015 (SCI-Expanded)

Evaluation of the effect of boride layer structure on the high temperature wear behavior of bonded steels

MOTALLEBZADEH A., DİLEKTAŞLI E., BAYDOĞAN M., ATAR E., Çimenoğlu H.

WEAR , cilt.328, ss.110-114, 2015 (SCI-Expanded)

Characteristics of multi-layer coating formed on commercially pure titanium for biomedical applications

Teker D., MUHAFFEL F., MENEKSE M., KARAGULER N. G., BAYDOGAN M., CIMENOGLU H.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , cilt.48, ss.579-585, 2015 (SCI-Expanded)

Dry sliding wear behaviour of Al Fe Si V alloys at elevated temperatures

Koraman E., Baydoğan M., Sayılgan S., KALKANLI A.

WEAR , cilt.322323, ss.101-107, 2015 (SCI-Expanded)

Wear and corrosion characteristics of novel alumina coatings produced by micro arc oxidation on AZ91D magnesium alloy

Tazegul O., Muhaffel F., MEYDANOGLU O., BAYDOGAN M., KAYALI E. S., CIMENOGLU H.

SURFACE & COATINGS TECHNOLOGY , cilt.258, ss.168-173, 2014 (SCI-Expanded)

Effect of incorporating carbon nanotubes into electrolyte on surface morphology of micro arc oxidized Cp-Ti

Yazici S. K., Muhaffel F., BAYDOGAN M.

APPLIED SURFACE SCIENCE , cilt.318, ss.10-14, 2014 (SCI-Expanded)

Cumulative effect of low-level laser therapy and low-intensity pulsed ultrasound on bone repair in rats

Babuccu C., KEKLİKOĞLU N., Baydoğan M., Kaynar A.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY , cilt.43, sa.6, ss.769-776, 2014 (SCI-Expanded)

Fatigue performance of low temperature nitrided AISI 321 grade austenitic stainless steel

Celik O., Baydoğan M., Atar E., Kayali E. S., Çimenoğlu H.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.565, ss.38-43, 2013 (SCI-Expanded)

Fabrication and characterization of Ni-W solid solution alloys via mechanical alloying and pressureless sintering

Genc A., Öveçoğlu M. L., BAYDOGAN M., Turan S.

MATERIALS & DESIGN , cilt.42, ss.495-504, 2012 (SCI-Expanded)

Service Life Estimation for a Reformer Tube against Creep Dominated Failure

Baydoğan M., Kayali E. S., Cimenoglu H.

MATERIALS TESTING , cilt.54, sa.1, ss.49-52, 2012 (SCI-Expanded)

Characterization of Thermally Oxidized Ti6Al7Nb Alloy for Biological Applications

Çimenoğlu H., MEYDANOGLU O., BAYDOGAN M., Bermek H., HUNER P., KAYALI E. S.

METALS AND MATERIALS INTERNATIONAL , cilt.17, sa.5, ss.765-770, 2011 (SCI-Expanded)

Micro arc oxidation of Ti6Al4V and Ti6Al7Nb alloys for biomedical applications

Çimenoğlu H., Gunyuz M., KoseG T., BAYDOĞAN M., UĞURLU F., Sener C.

Materials Characterization , cilt.62, sa.3, ss.304-311, 2011 (SCI-Expanded)

Successive Boronizing and Austempering for GGG 40 Grade Ductile Iron

Baydoğan M.

Journal of Iron and Steel Research International , cilt.16, sa.2, ss.50-54, 2009 (SCI-Expanded)

Improved resistance to stress-corrosion-cracking failures via optimized retrogression and reaging of 7075-T6 aluminum sheets

Baydoğan M., Çimenoğlu H., Kayali E. S., Rasty J.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.10, ss.2470-2476, 2008 (SCI-Expanded)

Measurement of Residual Stresses in Nuclear grade Zr 4 R Tubes Effect of Heat Treatment

Baydoğan M.

EXPERIMENTAL MECHANICS , cilt.47, sa.2, ss.185-199, 2007 (SCI-Expanded)

Wear Behaviour of 7039 Aluminum Alloy

MİNDİVAN H., BAYDOĞAN M., KAYALI E. S., Çimenoğlu H.

MATERIALS CHARACTERIZATION , cilt.54, sa.3, ss.263-269, 2005 (SCI-Expanded)

A study on sliding wear of a 7075 aluminum alloy

Baydogan M., Cimenoglu H., Kayali E.

WEAR , cilt.257, ss.852-861, 2004 (SCI-Expanded)

Influence of Retrogression and Reageing on Mechanical and Corrosion Properties of 7039 Aluminium Alloy

Baydoğan M.

ZEITSCHRIFT FUR METALLKUNDE , cilt.95, sa.1, ss.14-17, 2004 (SCI-Expanded)

Deformation Induced Surface Roughening of Austenitic Stainless Steels A Case Study Analysing Surface Roughening During Sheet Metal Forming Process

Baydoğan M., Akoy M. A., ÇİMENOĞLU H., KAYALI E. S.

ISIJ INTERNATIONAL , cilt.43, sa.11, ss.1795-1798, 2003 (SCI-Expanded)

The effect of austempering time on mechanical properties of a ductile iron

Baydogan M., Cimenoglu H.

SCANDINAVIAN JOURNAL OF METALLURGY , cilt.30, sa.6, ss.391-395, 2001 (SCI-Expanded)

The Effect of Austempering Time on Mechanical Properties of a Ductile Iron

BAYDOĞAN M., ÇİMENOĞLU H.

Scandinavian Journal Of Metallurgy , cilt.30, sa.6, ss.391-395, 2001 (SCI-Expanded)

An energetic approach to abrasive wear of a martensitic stainless steel

Pamuk U., Baydogan M., Nilufer B., Cimenoglu H.

SCRIPTA MATERIALIA , cilt.42, sa.9, ss.881-885, 2000 (SCI-Expanded)

The Effect of Deformation Before Aging on the Wear Resistance of an Aluminium Alloy

Sun Y., BAYDOĞAN M., Çimenoğlu H.

MATERIALS LETTERS , cilt.38, sa.3, ss.221-226, 1999 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

SYNTHESIS OF ZIRCONIA/MAGNESIA COMPOSITE COATING ON AZ91 MAGNESIuM AllOY

SELVİ E., MUHAFFEL F., BAYDOĞAN M.

Journal of Chemical Technology and Metallurgy , 2019 (Scopus)

Estimating volume fractions of microstructural constituents in austempered high silicon alloyed GJS 600-10 ductile iron through magnetic measurements (VSM)

YÜREKTÜRK Y., BAYDOĞAN M.

Materials Science Forum , cilt.907, ss.50-55, 2017 (Scopus)

Inconel 718 süperalaşımının farklı gerilme ve sıcaklıklarda yüksek sıcaklık sürünme davranışının incelenmesi

Subaşı E., KAYALI E. S., BAYDOĞAN M.

SAKARYA ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ DERGİSİ , cilt.20, sa.1, ss.47-57, 2016 (Hakemli Dergi)

Effect of Voltage Parameters on Surface Morphology of Micro Arc Oxidized Cp Titanium

Selim Kaan Y., MUHAFFEL F., BAYDOĞAN M.

Defect and Diffusion Forum , cilt.353, ss.211-216, 2014 (Scopus)

Characterization and wear properties of carbon nanotubes incorporated ceramic coatings on Ti6Al4V and Ti6Al7Nb alloys

Yazıcı S. K., MUHAFFEL F., YÜREKTÜRK Y., BAYDOĞAN M.

Journal of Achievements in Materials and Manufacturing Engineering , cilt.65, sa.2, ss.73-78, 2014 (Scopus)

Micro Arc Oxidation of AZ91 Magnesium Alloy Effect of Organic Compounds in the Electrolyte

Gözüaçık N. K., Altay M., BAYDOĞAN M.

Defect and Diffusion Forum , cilt.353, ss.217-222, 2014 (Scopus)

RRA İşleminin 7075 alaşımının mekanik özelliklerine etkisi

BAYDOĞAN M., ÇİMENOĞLU H., KAYALI E. S.

İTÜ Dergisi/d Mühendislik , cilt.3, sa.6, ss.108-116, 2004 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Thermal Insulation Properties of Glass Fiber Epoxy Composite with Stonewool Fiber, Nanofiber Web, Silica Aerogel Layers

Günal S. R., SAYAR E., Geygel B., Özkan Hacıoğulları S., Karaca N., UÇAR M., et al.

6. International Fiber and Polymer Research Symposium, 24 - 25 Ocak 2020, cilt.1, ss.67-69

Biomechanical Comparison of Three Different Screw Designs in Osteoporotic Spine Fixation

SUNGUR M., SARIYILMAZ K., ÖZKUNT O., CİNGÖZ T., GEMALMAZ H. C., YÜREKTÜRK Y., et al.

XIII. International Turkish Spine Congress, 3 - 06 Nisan 2019, ss.9

Effect of Isothermal Annealing on Microstructure and Mechanical Properties of a High Carbon Steel

KUZKAYA S., YÜREKTÜRK Y., MUHAFFEL F., BAYDOĞAN M.

Fourth International Iron Steel Symposium, 4 - 06 Nisan 2019

Direct Vertebral Rotation Significantly Decreases the Pull-out Strength of the Pedicle Screw

SARIYILMAZ K., ÖZKUNT O., GEMALMAZ H. C., CİNGÖZ T., pehlivanoğlu t., BAYDOĞAN M., et al.

25th International Meeting on Advanced Spinal Techniques (IMAST), Los-Angeles, Şili, 11 - 14 Temmuz 2018, ss.76

Synthesis of an Antibacterial and Wear-resistant Multilayer Coating on Biomedical Titanium-based alloys

MUHAFFEL F., Aydogan D. T., Menekse M., GÜL-KARAGÜLER N., BAYDOĞAN M., ÇİMENOĞLU H.

TURKEYTRIB 2018, 18 - 20 Nisan 2018

Hot Dip Aluminizing of Commercially Pure (CP) Titanium

ALTAY M., YÜREKTÜRK Y., BAYDOĞAN M.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018

Effect of Intermediate Deformation on Formability Characteristics of Retrogression and Reaged (RRA) 7075 Al Alloy

RASHİDİ A., YÜREKTÜRK Y., BAYDOĞAN M.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018

Synthesis of Zirconia/Magnesia Composite Coating on AZ91 Magnesium Alloy

SELVİ E., MUHAFFEL F., BAYDOĞAN M.

The 2nd International Conference on Material Science and Technology (IMSTEC 2017), 11 - 13 Ekim 2017

A Ceramic Coating for Corrosion Protection on AISI 316Ti Stainless Steel

TAŞLIÇAY C., YÜREKTÜRK Y., MUHAFFEL F., BAYDOĞAN M.

The 2nd International Conference on Material Science and Technology (IMSTEC 2017), 11 - 13 Ekim 2017

Thermal Oxidation of Cold Sprayed Ti-Cu-Fe3O4 Coating

Paksoy A. H., TAZEGÜL O., ÇETİNER D., BAYDOĞAN M., ATAR E., GÜLERYÜZ H., et al.

15th International Conference on Tribology- SERBIATRIB ’17, 17 Mayıs - 19 Eylül 2017

Tribology of Titanium Based Coating Fabricated on CoCr Alloy

ÇETİNER D., Paksoy A. H., TAZEGÜL O., BAYDOĞAN M., GÜLERYÜZ H., ÇİMENOĞLU H., et al.

9. International Conference on Tribology (BalkanTRib’17), 13 - 15 Eylül 2017

Production of a protective alumina coating on 316Ti grade stainless steel by micro arc oxidation process

Taşlıçay C., YÜREKTÜRK Y., MUHAFFEL F., BAYDOĞAN M.

9th International Conference on Tribology (Balkantrib’17), 13 - 15 Eylül 2017

Formation of a wear-resistant oxide coating on high silicon cast iron by combining aluminizing and micro arc oxidation methods

YÜREKTÜRK Y., MUHAFFEL F., BAYDOĞAN M.

9th International Conference on Tribology (Balkantrib’17), 13 - 15 Eylül 2017, ss.92

The effect of silver additıon and powder shape of cobalt to metal matrix based diamond tools on the natural stone cutting performance

BULUT B., BAYDOĞAN M., KAYALI E. S.

3rd International Porous Powder Materials Symposium Exhibition PPM 2017, 12 - 15 Eylül 2017, ss.59-63

Failure Analysis of Fencing Blades

Kibaroglu D., Baydogan M., Cimenoglu H., Bas B., Yagsi C., Aliyeva N.

6th International Conference on Fracture Fatigue and Wear (FFW), Porto, Portekiz, 26 - 27 Temmuz 2017, cilt.843

Microstructural Characterization Of Micro Arc Oxidized Za-8 Zinc-Aluminum Alloy

Çamlıbel B., MUHAFFEL F., YÜREKTÜRK Y., BAYDOĞAN M.

31st International Conference on Surface Modification Technologies (SMT31), 5 - 07 Temmuz 2017

A Study to Fabricate Bioactive TiO2 on The Surface of CoCr Alloy by The Combination of Cold Spray and Thermal Oxidation Processes

ÇETİNER D., Paksoy A. H., TAZEGÜL O., BAYDOĞAN M., GÜLERYÜZ H., ÇİMENOĞLU H., et al.

XXXI International Conference on Surface Modification Technologies (SMT31), 5 - 07 Temmuz 2017

Effect of Pre-Straining and baking Temperature on Bake Hardening Behaviour of Hot-Dip Galvanized Steels

AYTAN G., YÜREKTÜRK Y., BAYDOĞAN M.

10th. International Conference on Materials ScienceEngineering, BraMat 2017, 8 - 11 Mart 2017, ss.35

Effect of Single Step and Two Step Austempering on Microstructure and Mechanical Properties of a High Silicon Ductile Iron

Gider G., YÜREKTÜRK Y., MALCIOĞLU A. U., MUHAFFEL F., BAYDOĞAN M.

International Conference on Advances in Automotive Technologies, 11 - 14 Ekim 2016

Microstructural investigation and wear performance of spheroidal graphite cast iron treated by a two step austempering process

Gider G., YÜREKTÜRK Y., Paksoy A. H., MUHAFFEL F., BAYDOĞAN M.

16. International Materials Symposium (IMSP’16), 12 - 14 Ekim 2016

The Comparison of the Sintering Methods for Producing Diamond Tools Which are used in Natural Stone Cutting

Bulut B., TAZEGÜL O., BAYDOĞAN M., KAYALI E. S.

16th International Materials Symposium IMSP'2016, 12 - 14 Ekim 2016, ss.1582-1588

Microstructural Investigation and Wear Performance of Ductile Irons Treated by Two Step Austempering Processes

Gider G., YÜREKTÜRK Y., Paksoy A. H., MUHAFFEL F., BAYDOĞAN M.

16th International Materials Symposium IMSP'2016, 12 - 14 Ekim 2016, ss.1118-1125

Characterization of Diamond Tools for Cutting Natural Stones Using Fe Co Cu Base Alloy as a Metal Matrix

Bulut B., TAZEGÜL O., BAYDOĞAN M., KAYALI E. S.

18th International Metallurgy and Materials Congress, IMMC2016, 29 Eylül - 01 Ekim 2016, ss.489-492

Characterization of Carbon Nanotubes Incorporated Ceramic Coatings Fabricated via Micro Arc Oxidation on AZ91D Magnesium Alloy

Kılıç D., MUHAFFEL F., YÜREKTÜRK Y., BAYDOĞAN M.

30th International Conference on Surface Modification Technologies (SMT30), 29 Haziran - 01 Temmuz 2016

Characterization of micro arc oxidized unalloyed low carbon steel after hot dip aluminizing process

Açıksöz M., YÜREKTÜRK Y., MUHAFFEL F., BAYDOĞAN M.

13th International Conference of Diffision in Solid and Liquids, 26 - 30 Haziran 2016

Influence of Austempering Temperature on Microstructural and Mechanical Properties of EN GJS 500 7 and EN GJS 600 3 grades nodular cast irons

GİDER G., YÜREKTÜRK Y., PAKSOY A. H., MUHAFFEL F., BAYDOĞAN M.

5. Isıl İşlem Sempozyumu, Türkiye, 2 - 03 Haziran 2016

Characteristics of Ceramic Coating Fabricated by Micro Arc Oxidation on Aluminized Stainless Steel

Taşlıçay C., YÜREKTÜRK Y., MUHAFFEL F., BAYDOĞAN M.

International Conference on Material Science and Technology, 6 - 08 Nisan 2016

Post Weld Heat Treatment Applied in Examining The Mechanical Properties of 13CrMo4 5 and X10CrMoVNb9 1 Grade Steel

Kırbaş C., Çiçek B., BAYDOĞAN M., ÇİMENOĞLU H.

International Conference on Materials Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016, ss.43-48

Aerojel Özellikleri Üretim Yöntemleri Kullanım Alanları

BAYDOĞAN M.

Tekstil Tabanlı Akıllı ve Çok Fonksiyonlu Kompozit Ürün ve Yalıtım Malzemelerinin Geliştirilmesi Çalıştayı, Türkiye, 09 Aralık 2015

Tribological Investigation of Austempered Grey Cast Iron for Automotive Components under Dry Sliding Conditions

Malcıoğlu U., Yürektürk Y., Muhaffel F., Baydoğan M.

TurkeyTrib’15, İstanbul, Türkiye, 7 - 09 Ekim 2015

Manufacturing of Nanocomposite Tetraethyly Orthosilicate TEOS Silica Aerogels for Energy Applications

Kılıç C., Baydoğan M., Baydoğan N., Çimenoğlu H.

INERMA International Energy Raw Materials and Energy Confex, İstanbul, Türkiye, 1 - 03 Ekim 2015, ss.1

Elevated Temperature Wear Behavior of Paste Borided 42CrMo4 and X20Cr13 Steels

Motallabzadeh A., Emre D., BAYDOĞAN M., ATAR E., ÇİMENOĞLU H.

IISS’15, Proceedings of 2nd International Iron & Steel Symposium, Karabük, Türkiye, 1 - 03 Nisan 2015, ss.208-212

Effect of Stress Relief Annealing Temperature on Mechanical Properties of AISI P11 and AISI P91 Grade Seamless Pipe Steels

Kırbaş C., Çiçek B., BAYDOĞAN M., ÇİMENOĞLU H.

IISS’15, Proceedings of 2nd International Iron & Steel Symposium, Karabük, Türkiye, 1 - 03 Nisan 2015, ss.306-311

Influence of Pulse Time on the Structural and Tribological Properties of Micro Arc Oxidized AZ91D Magnesium Alloy

Kılıç D., MUHAFFEL F., YÜREKTÜRK Y., BAYDOĞAN M.

TMS 2015 - 144th Annual Meeting & Exhibition, Orlando, Amerika Birleşik Devletleri, 15 - 19 Mart 2015

Characterization and Wear Properties of Carbon Nanotubes Incorporated Ceramic Coatings on Ti6Al4V and Ti6Al7Nb Alloys

Yazıcı S. K., MUHAFFEL F., YÜREKTÜRK Y., BAYDOĞAN M.

IMSP 2014, 15th International Materials Symposium (IMSP’2014), 15 - 17 Ekim 2014

Kızdırıcı Boruda Hasar Analizi Çalışması

YÜREKTÜRK Y., KAYALI E. S., BAYDOĞAN M., ÇİMENOĞLU H.

IMSP 2014, 15th International Materials Symposium (IMSP’2014), Denizli, Türkiye, 15 - 17 Ekim 2014, ss.150

Micro Arc Oxidation of AZ91 Mg Alloy in Silicate Electrolyte Effect of Electrical Parameters

Kılıç D., MUHAFFEL F., BAYDOĞAN M.

ISTS’2014, 2nd International Surface Treatment Symposium, İstanbul, Türkiye, 25 - 27 Haziran 2014

Bir Aluminyum Ekstrüzyon Kalıbında Hasar Analizi Çalışması

YÜREKTÜRK Y., BAYDOĞAN M., KAYALI E. S., ÇİMENOĞLU H.

10. Uluslararası Kırılma Konferansı, Kayseri, Türkiye, 24 - 26 Nisan 2013, ss.152-156

Effect of voltage parameters on surface morphology of micro arc oxidized Cp titanium

Yazici S. K., Muhaffel F., Baydoğan M.

9th International Conference on Diffusion in Solids and Liquids Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials, DSL 2013, Madrid, İspanya, 24 - 28 Haziran 2013, cilt.353, ss.211-216

Rotating bending Fatigue Behaviour of a High Silicon Content Ductile Iron

Ateş B., Demirlek M., BAYDOĞAN M., ÇİMENOĞLU H.

International Journal of Art and Science, Prag, Çek Cumhuriyeti, 28 - 31 Mayıs 2013

Capacitance-Voltage (C-V) Properties of ZnO:Al/p-Si Heterojunctions

Baydogan N., Gokce Y., Baydogan M., Cimenoglu H.

8th International Conference on Diffusion in Solids Liquids (DSL 2012), İstanbul, Türkiye, 25 - 29 Haziran 2012, ss.349-350

Effect of Surfactant on Surface Morphology and Wear Resistance of a Micro Arc Oxidized Cp-Ti

Ozkara I. M., Baydoğan M.

12th World Conference on Titanium (Ti-2011), Beijing, Çin, 19 - 24 Haziran 2011, ss.1299-1302

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al BASED COMPOSITE COATINGS PRODUCED BY THE COLD GAS DYNAMIC SPRAYING PROCESS

Meydanoglu O., Baydoğan M., Kayali E. S., Çimenoğlu H.

TMS 140th Annual Meeting and Exhibition, California, Amerika Birleşik Devletleri, 27 Şubat - 03 Mart 2011, ss.219-226

Micro Arc Oxidation of AZ91 Mg Alloy for Improved Corrosion Resistance

Yavuz H. G., Gunyuz M., Ozkara I. M., Baydogan M., Cimenoglu H.

6th International Conference on Diffusion in Solids and Liquids, Paris, Fransa, 5 - 07 Temmuz 2010, ss.877-881

The Effect of Micro arc Oxidation Process Parameters on Surface Properties of Ti6Al4v Alloy

Gunyuz M., Baydogan M., Cimenoglu H., Kayali E. S.

6th International Conference on Diffusion in Solids and Liquids, Paris, Fransa, 5 - 07 Temmuz 2010, ss.1000-1003

The Effect of Frequency of Microarc Oxidation on Surface Properties of 7075 Aluminum Alloys

Bozkus S. S., Baydoğan M., Çimenoğlu H., Kayali E. S.

TMS 2010 Annual Meeting Supplemental Proceedings on Materials Processing and Properties, Washington, Amerika Birleşik Devletleri, 14 - 18 Şubat 2010, ss.657-662

Mikro Ark Oksidasyon İşleminde Voltaj Uygulama Süresinin 2024 Kalite Alüminyum Alaşımının Morfolojik Özelliklerine Ve Aşınma Direncine Etkisi

Özkara İ. M., BAYDOĞAN M.

5. Uluslararası İleri Teknolojiler Sempozyumu (IATS 09), 13 - 15 Mayıs 2009, ss.1091-1094 Sürdürülebilir Kalkınma

Radyasyon ile Uyartılarak Optik ve Mekanik Özellikleri Geliştirilen Nanometrik Boyuttaki Al Katkılı ZnO İletken Filmler

Baydoğan N., Çimenoğlu H., Kayalı E. S., Tuğrul A. B., Altınsoy N., Baydoğan M.

İTÜ Nano Bilim ve Nano Teknoloji Çalıştayı, İstanbul, Türkiye, 12 - 13 Şubat 2009, cilt.1, ss.39

Synthesis and Characterization of Ag Doped Hydroxylapatite as an Antibacterial Scaffolds Material

Bahadir A., Ergun C., Baydoğan M.

4th International Conference on Diffusion in Solids and Liquids, Barcelona, İspanya, 9 - 11 Temmuz 2008, ss.250-255

The effect of thermal oxidation on the fatigue behavior of Ti6Al4V and Ti6Al7Nb alloys

Meydanoglu O., Cingi M., Baydoğan M., Çimenoğlu H., Kayali E. S.

137th Annual Meeting and Exhibition of the Minerals-Metals-and-Materials-Society, Louisiana, Amerika Birleşik Devletleri, 9 - 13 Mart 2008, ss.411-415

The effect of processing parameters on biocompatibility of micro-arc oxidized titanium alloys

Gunyuz M., Baydoğan M., Çimenoğlu H., Kayali E. S.

137th Annual Meeting and Exhibition of the Minerals-Metals-and-Materials-Society, Louisiana, Amerika Birleşik Devletleri, 9 - 13 Mart 2008, ss.423-428