Doç.Dr. Sertaç Çadırcı

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of inertial focusing of micro- and nanoparticles in spiral microchannels using computational fluid dynamics

Aldemir A. T., Çadırcı S., Trabzon L.

Physics of Fluids , cilt.35, sa.11, 2023 (SCI-Expanded)

NUMERICAL INVESTIGATION OF PLATE COOLING USING MULTIPLE IMPINGING JETS IN DIFFERENT ALIGNMENTS FARKLI DİZİLİMLERDE ÇOKLU ÇARPAN JETLER İLE PLAKA SOĞUTMASININ SAYISAL OLARAK İNCELEMESİ

YILDIZELİ A., ÇADIRCI S.

Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology , cilt.43, sa.1, ss.1-10, 2023 (SCI-Expanded)

Experimental and numerical study of the effect of the channel curvature angle on inertial focusing in curvilinear microchannels

Ince D., Turhan H., Çadırcı S., Trabzon L.

Journal of Applied Physics , cilt.132, sa.22, 2022 (SCI-Expanded)

Artificial neural network model and multi-objective optimization of microchannel heat sinks with diamond-shaped pin fins

Polat M. E., Çadırcı S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.194, 2022 (SCI-Expanded)

Dynamic Modeling and Experimental Validation of a Domestic Refrigeration Cycle

Caglayan A., Husain S. M., Ipek M., Aynur T. N., Çadırcı S.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS , cilt.14, sa.7, 2022 (SCI-Expanded)

<p>Parametric study and optimization of microchannel heat sinks with various shapes</p>

Kose H. A., Yıldızeli A., Çadırcı S.

APPLIED THERMAL ENGINEERING , cilt.211, 2022 (SCI-Expanded)

Multi-objective optimization and performance assessment of microchannel heat sinks with micro pin-fins

Polat M. E., Ulger F., Çadırcı S.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.174, 2022 (SCI-Expanded)

Flow Separation Control on NACA0015 Airfoil Using Synchronized Jet Actuator

Sonkaya F., Çadırcı S., Erdem D.

Journal of Applied Fluid Mechanics , cilt.15, sa.2, ss.427-440, 2022 (SCI-Expanded)

Investigation of Suction Flow Control on Centrifugal Compressor with Vaned Diffuser

Ak S. E., Çadırcı S.

ENERGIES , cilt.15, sa.2, 2022 (SCI-Expanded)

Studying dynamic stress effects on the behaviour of THP-1 cells by microfluidic channels

Birol S. Z., Fucucuoglu R., Çadırcı S., Sayı Yazgan A., Trabzon L.

SCIENTIFIC REPORTS , cilt.11, sa.1, 2021 (SCI-Expanded)

Numerical Investigation of Active Flow Control on Laminar Forced Convection over a Backward Facing Step Surrounded by Multiple Jets

Coskun U. C., Cadirci S., Gunes H.

JOURNAL OF APPLIED FLUID MECHANICS , cilt.14, sa.2, ss.447-458, 2021 (SCI-Expanded)

Multi-objective optimization of multiple impinging jet system through genetic algorithm

Yıldızeli A., Çadırcı S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.158, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Multi objective optimization of a micro-channel heat sink through genetic algorithm

Yıldızeli A., Çadırcı S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.146, 2020 (SCI-Expanded)

Experimental and numerical investigation of lubrication system for reciprocating compressor

Özsipahi M., Kose H. A., Çadırcı S., Kerpicci H., Güneş H.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.108, ss.224-233, 2019 (SCI-Expanded)

Experimental and numerical investigation on particle-particle interaction of multi-particle separation in an alternating and repetitive microchannel

Çadırcı S., İnce D., Ghanem İ., Birol S. Z., Trabzon L., Turhan H.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS , cilt.25, sa.1, ss.307-318, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation on the effects of variable shear stress on monocyte cell morphology

BIROL S. Z., FUCUCUOGLU R., Çadırcı S., SAYI-YAZGAN A., Trabzon L.

Micro and Nano Letters , cilt.12, sa.11, ss.881-885, 2017 (SCI-Expanded)

Numerical and experimental investigation of wiper system performance at high speeds

Çadırcı S., AK S., SELENBAS B., Güneş H.

Journal of Applied Fluid Mechanics , cilt.10, sa.3, ss.861-870, 2017 (SCI-Expanded)

GEOMETRIC MODIFICATIONS TO MINIMIZE LIFT ACTING ON A SIMPLIFIED FRONT WINDSHIELD WIPER BLADE

ÇADIRCI S., Ak S. E., Selenbas B., Güneş H.

ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology , cilt.0, sa.36, ss.103-109, 2016 (SCI-Expanded)

A comparison of an analytical and numerical flow model for the lubrication system of a variable speed hermetic compressor

Özsipahi M., Cadirci S., Gunes H., Sarioglu K.

Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology , cilt.36, sa.2, ss.41-49, 2016 (SCI-Expanded)

A numerical study on the lubrication system for a hermetic reciprocating compressor used in household refrigerators

Özsipahi M., CADIRCI S., Güneş H., SARIOGLU K., KERPICCI H.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.48, ss.210-220, 2014 (SCI-Expanded)

Numerical investigation of a jet and vortex actuator in a cross flow boundary layer

Çadırcı S., Güneş H., Rist U.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS , cilt.44, ss.42-59, 2014 (SCI-Expanded)

HEAT TRANSFER ENHANCEMENT BEHIND A BACKWARD FACING STEP WITH ACTIVE FLOW CONTROL

Çadırcı S., Güneş H.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.34, sa.2, ss.129-141, 2014 (SCI-Expanded)

Active flow control applications with a jet and vortex actuator in a laminar cross flow

Çadırcı S., Güneş H., RIST U.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , cilt.39, ss.146-159, 2013 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Investigation of the Effects of Needle Designs on the Root Canal Irrigation Using Computational Fluid Dynamics

YILDIZELİ A., Bulgu S., Cadirci S., YILDIRIM S.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.25, sa.75, ss.769-780, 2023 (Hakemli Dergi)

Investigation of Mechanical Effects on Heat Pump Evaporator to Accelerate Water Drainage

Solmaz S., KERPİÇÇİ H., ÇADIRCI S.

INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY , cilt.37, sa.4, ss.966-974, 2019 (ESCI)

AĞIR İŞ DİZEL MOTORU SİLİNDİRİ İÇERİSİNDEKİ SOĞUK HAVA AKIŞININ SAYISAL İNCELENMESİ

AYAZ E., KÖTEN H., ÇADIRCI S.

Marmara Fen Bilimleri Dergisi , 2018 (Hakemli Dergi)

Mikrokanallarda cidar kayma gerilmesi ve basınç farkının sayısal olarak incelenmesi

Çadırcı S., Demir U., Birol S. Z., Trabzon L., Güneş H.

Pamukkale Üniversitesi Mühendislik Dergisi , cilt.24, sa.1, ss.19-24, 2018 (Hakemli Dergi)

Improving Aerodynamic Performance for a Reliable Wiper System

Çadırcı S., AK S. E., SELENBAS B., GUNES H.

INTERNATİONAL JOURNAL OF AUTOMOTİVE ENGİNEERİNG AND TECHNOLOGİES , cilt.6, sa.1, ss.30-40, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

CFD Strategies for Transonic Flows with OpenFOAM Using High Skewed Tetrahedral Meshes

Buluş H., ÇADIRCI S.

10th International Symposium on Innovative Technologies in Engineering and Science, Türkiye, 21 Ekim 2022

Investigation of Grooved Heat Pipe Embedded Cold Plate Design with Additive Manufacturing

Yagci V., Parlak M., Çadırcı S.

28th International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2022, Dublin, İrlanda, 28 - 30 Eylül 2022

NUMERICAL INVESTIGATION AND VALIDATION OF JET TEMPERATURE EFFECTS ON NOZZLE-AFTERBODY DRAG

Haznedaroğlu B., Çiftçi Ö., Çadırcı S., Aytaç S.

International Mechanical Engineering Congress and Exposition IMECE2021, New York, Amerika Birleşik Devletleri, 1 - 05 Kasım 2021, ss.1-9

Parametric Investigation on Thermal and Hydraulic Performance of Minichannel Heatsink

Atalay O., Gültekin M., Çadırcı S.

International Mechanical Engineering Congress and Exposition IMECE2021, New York, Amerika Birleşik Devletleri, 1 - 05 Kasım 2021, ss.1-9

Parametric Study On Hydraulic And Thermal Performance Of Finned Microchannel Heat Sinks

Polat M. E., Ülger F., Çadırcı S.

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Pretoria, Güney Afrika, 26 - 28 Temmuz 2021, ss.1784-1790

Validation of a Radial Compressor CFD Analysis

Ak S. E., Çadırcı S.

8th International Symposium on Innovative Technologies in Engineering and Science, Bursa, Türkiye, 23 - 25 Ekim 2020, ss.84-90

Design Optimization of Triangular Microchannel Heat Sink Using Genetic Algorithm

Köse H. A., Yıldızeli A., ÇADIRCI S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, Türkiye, 17 - 19 Aralık 2019

Analytical and Numerical Solutions of 1D Advection-Diffusion Equation

Canbolat G., Köse H. A., Yıldızeli A., ÇADIRCI S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 17 - 19 Aralık 2019

Numerical Investigation of Transitional Flow over a Flat Plate under Constant Heat Fluxes

CANBOLAT G., YILDIZELİ A., Köse H. A., ÇADIRCI S.

6th International Symposium on Innovative Technologies inEngineering and Science, Antalya, Türkiye, 9 - 11 Kasım 2018, cilt.1, ss.187-195

Numerical Investigation of Conjugate Heat Transfer in Rectangular Micro‐Channel Heat Sinks under Laminar Flow Conditions

Köse H. A., YILDIZELİ A., CANBOLAT G., ÇADIRCI S.

6th International Symposium on Innovative Technologies inEngineering and Science, Antalya, Türkiye, 9 - 11 Kasım 2018, cilt.1, ss.196-205

Dağıtılmış hava jeti kullanarak hassas cisimlerin manipülasyonunun sayısal olarak incelenmesi

YILDIZELİ A., Karabay A. Y., COŞKUN U. C., ÇADIRCI S., Vatansever E., SÜMER B., et al.

VIII. Ulusal Hidrolik Pnömatik Kongresi, İstanbul, Türkiye, 22 - 25 Kasım 2017 Sürdürülebilir Kalkınma

Kaviteli Mikroakışkan Kanallarda Uygulanan Kayma Gerilmesinin Monosit Hücrelerine Etkisi

Fuçucuoğlu R., Birol S. Z., Çadırcı S., Trabzon L., Sayı Yazgan A.

23. Ulusal Immünoloji Kongresi, İstanbul, Türkiye, 27 - 30 Nisan 2017, ss.44

Investigation on the effects of variable shear stress on monocyte cell morphology

Birol S. Z., Fucucuoglu R., Çadırcı S., Sayı Yazgan A., Trabzon L.

12th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS), Los-Angeles, Şili, 9 - 12 Nisan 2017, ss.239-242

Numerical and Analytical Investigation of Viscous Fluids in a Screw Extruder

Çadırcı S., Özsipahi M., Güneş H.

ASME 2016-International Mechanical Engineering Congress and Exposition (IMECE), Phoenix, Amerika Birleşik Devletleri, 11 - 17 Kasım 2016, ss.1

Numerical Investigation of Turbulent Flow over a Windscreen Wiper Blade

Çadırcı S., Özsipahi M., Coşkun U. C., Selenbaş B., Güneş H.

ASME 2016-International Mechanical Engineering Congress and Exposition (IMECE), Phoenix, Amerika Birleşik Devletleri, 11 - 17 Kasım 2016, ss.1

POD Analysis of Jet and Vortex Flows Induced by Oscillating Backward Facing Step

Çadırcı S., Özsipahi M., Güneş H.

5th International Conference on Jets, Wakes and Separated Flows (ICJWSF), Stockholm, İsveç, 15 - 18 Haziran 2015, cilt.185, ss.249-257

Active Flow Control Behind a Backward Facing Step Using A Zero-Net-Mass-Flux System

COŞKUN U. C., ÇADIRCI S., GÜNEŞ H.

Proceedings of the 5th International Conference on Jets Wakes and Separated Flows ICJWSF2015, 15 - 18 Haziran 2015

Active Flow Control behind a BFS Using a Zero-Net-Mass-Flux-System

Coşkun U. C., Çadırcı S., Güneş H.

Int. Conf. on Jets, Wakes and Separated Flows, Stockholm, İsveç, 16 - 18 Haziran 2015, ss.1

Experimental Investigation of Oil Flowrate in a Hermetic Reciprocating Compressor

Çadırcı S., Güneş H., Kerpiççi H.

ESDA2014-20044, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, Kopenhag, Danimarka, 25 - 27 Haziran 2014, ss.1

Numerical Simulation of Lubrication System in a Hermetic Reciprocating Compressor

Özsipahi M., Çadırcı S., Güneş H., Kerğpiççi H.

ESDA2014-20044, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, Kopenhag, Danimarka, 25 - 27 Haziran 2014, ss.1

Yersel Emme ve Üfleme ile Ters Basamak Ardındaki Akış Kontrolü ve Isı Transferinin İyileştirilmesi

Coşkun U. C., Çadırcı S., Güneş H.

III. Ulusal Havacılıkta İleri Teknolojiler Konferansı, HİTEK 2014, İstanbul, Türkiye, 18 - 19 Haziran 2014, ss.1

Heat Transfer Enhancement behind a Backward Facing Step Using Localized Suction and Blowing

Coşkun U. C., Çadırcı S., Güneş H.

Proceedings of CONV-14, Int. Symp. on Convective Heat and Mass Transfer, Aydın, Türkiye, 8 - 13 Haziran 2014, ss.1

Numerical Investigation of JaVA-Induced Flow in Quiescent Water

Çadırcı S., Güneş H., Rist U.

ASME 2013-International Mechanical Engineering Congress and Exposition (IMECE), San Diego, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, ss.1

Boundary Layer Separation Control on an Inclined Plate Using Jet and Vortex Actuator

Çadırcı S., Güneş H.

ASME 2013-International Mechanical Engineering Congress and Exposition (IMECE), San Diego, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, ss.1

Hermetik Bir Kompresördeki Yağ Debisinin Deneysel İncelenemesi

Taş S., Çadırcı S., Güneş H., Sarıoğlu K., Kerpiççi H.

19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.1

Hermetik Bir Kompresördeki Yağ Debisinin Sayısal İncelenemesi

Özsipahi M., Çadırcı S., Güneş H., Sarıoğlu K., Kerpiççi H.

19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.1

Numerical Investigation of Oil Flow in a Hermetic Compressor

Özsipahi M., Çadırcı S., Güneş H., Kerpiççi H.

Proceedings of the 2013 International Conference on Mechanics, Fluids, Heat, Elasticity and Electromagnetic Fields, Venedik, İtalya, 1 - 02 Ocak 2013, ss.1

Experimental Investigation of Jet and Vortex Actuator Using Particle Image Velocimetry

Çadırcı S., Güneş H., Ulrich R.

ASME 2012-International Mechanical Engineering Congress and Exposition (IMECE), Houston, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.1

Numerical Investigation of Jet and Vortex Actuator (JaVA) for Active Flow Control

ÇADIRCI S., GÜNEŞ H., RIST U.

AIAA 5th Flow Control Conference, Chicago, Illinois, 28 Haziran - 01 Temmuz 2010

Proper orthogonal decomposition analysis of JaVA flows for cross flow conditions

Çadırcı S., Güneş H.

ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), Denver, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, ss.1

PROPER ORTHOGONAL DECOMPOSITON ANALYSIS OF JAVA FLOWS FOR CROSS-FLOW CONDITIONS

Çadırcı S., Güneş H.

ASME International Mechanical Engineering Congress and Exposition (IMECE), Colorado, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, ss.871-878

A Kriging-simulated annealing meta-algorithm for optimization of convective heat transfer in a grooved channel

Çadırcı S., Güneş H.

ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), Denver, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, ss.1

Optimization of a centrifugal fan impeller using Kriging-simulated annealing

Çadırcı S., Güneş H., Selenbaş B.

ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), Denver, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, ss.1

Flow separation control behind a backward facing step

Çadırcı S., Güneş H.

7. International Conference on Computational Heat and Mass Transfer (ICCHMT),, İstanbul, Türkiye, 18 - 22 Haziran 2011, ss.1

Flow visualizations of jet and vortex actuator under cross flow conditions

Çadırcı S., Güneş H., Rist U.

7. International Conference on Computational Heat and Mass Transfer (ICCHMT),, İstanbul, Türkiye, 18 - 22 Haziran 2011, ss.1

On the Use of POD Models for Convective Flow in a Grooved Channel

Çadırcı S., Güneş H.

ESDA2010-24892, Proceedings of the ASME 2010 10th Biennial Conference on Engineering System Design and Analysis ESDA2010, İstanbul, Türkiye, 12 - 14 Haziran 2010, ss.1