SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Effect of Co Addition on the Creep Rupture Properties of 9Cr-1.8W-xCo Weld Metals
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
, cilt.52, sa.1, ss.129-142, 2021 (SCI-Expanded)
Characterisation of CoB Co2B coatings by the scratch test
BravoBarcenas D., CamposSilva I., Çimenoğlu H., MartinezTrinidad J., FloresJimenez, M., MartinezGutierrez H.
SURFACE ENGINEERING
, cilt.32, sa.8, ss.570-577, 2016 (SCI-Expanded)
CHARACTERISATION AND TRIBOLOGICAL PROPERTIES OF HARD ANODISED AND MICROARC OXIDISED 5754 QUALITY ALUMINUM ALLOY
Journal of the Balkan Tribological Association
, cilt.22, sa.1, ss.233-239, 2016 (SCI-Expanded)
Sliding wear characteristics of molybdenum containing Stellite 12 coating at elevated temperatures
TRIBOLOGY INTERNATIONAL
, cilt.91, ss.40-47, 2015 (SCI-Expanded)
Evaluation of the effect of boride layer structure on the high temperature wear behavior of bonded steels
WEAR
, cilt.328, ss.110-114, 2015 (SCI-Expanded)
Functionally graded HA TiO2 nanostructured composite coating on Ti 6Al 4V substrate via electrophoretic deposition
SURFACE & COATINGS TECHNOLOGY
, cilt.265, ss.7-15, 2015 (SCI-Expanded)
The boriding process in CoCrMo alloy Fracture toughness in cobalt boride coatings
SURFACE & COATINGS TECHNOLOGY
, cilt.260, ss.362-368, 2014 (SCI-Expanded)
Tribological Properties of CrN Coated H13 Grade Tool Steel
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
, cilt.0, ss.240-245, 2014 (SCI-Expanded)
High temperature tribological behaviour of borided surfaces based on the phase structure of the boride layer
Wear
, cilt.0, ss.152-158, 2014 (SCI-Expanded)
Growth kinetics and mechanical properties of boride layers formed at the surface of the ASTM F 75 biomedical alloy
Campos-Silva I., Bravo-Bárcenas D., Meneses-Amador A., Ortiz-Dominguez M., Çimenoğlu H., Figueroa-López U., et al.
Surface and Coatings Technology
, cilt.0, ss.402-414, 2013 (SCI-Expanded)
Flaw Detection of Welded Joints Using Raiographic Examination
Academic Journal of Science
, cilt.0, ss.391-396, 2013 (SCI-Expanded)
TRIBOLOGICAL BEHAVIOUR OF DUPLEX TREATED PLASTIC MOLD STEEL
Journal of the Balkan Tribological Association
, cilt.19, sa.1, ss.37-43, 2013 (SCI-Expanded)
Synthesis microstructure and mechanical properties of WC TiC Co ceramic composites
Journal of the European Ceramic Society
, cilt.32, sa.7, ss.1427-1433, 2012 (SCI-Expanded)
ZnO Al Thin Films used in ZnO Al p Si Heterojunctions
Journal of Sol-Gel Science and Technology
, cilt.61, sa.3, ss.620-627, 2012 (SCI-Expanded)
Investigation into Mechanical Properties of High Strength Steel Plates Welded with Low Temperature Transformation LTT Electrodes
International Journal of Surface Science and Engineering
, cilt.6, sa.1, ss.157-173, 2012 (SCI-Expanded)
ZrC particle reinforced Al-4 wt.% Cu alloy composites fabricated by mechanical alloying and vacuum hot pressing: Microstructural evaluation and mechanical properties
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
, cilt.527, ss.5930-5938, 2010 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
The effect of SiC reinforcement on tribological behavior of cols sprayed coatings in water
Tribology-Materials, Surfaces Interfaces
, cilt.11, sa.1, ss.14-18, 2017 (Hakemli Dergi)
Oxidized Titanium
MATERIALS FOR TOTAL JOINT ARTHROPLASTY: BIOTRIBOLOGY OF POTENTIAL BEARINGS
, ss.355-393, 2016 (Hakemli Dergi)
Beta Irradiation Effect on CuInGa Se 2 Thin Films
Defect and Diffusion Forum
, cilt.365, ss.249-254, 2015 (Scopus)
Microstructure and Tribological Properties of PTA Deposited Stellite 12 Coating on Steel Substrate
Manufacturing Science and Technology
, cilt.3, sa.5, ss.224-228, 2015 (Hakemli Dergi)
POLİ (İMİD SİLOKSAN) KOPOLİMERLERİN FİZİKSEL ÖZELLİKLERİ
Ulusal Havacılıkta İleri Teknolojiler Konferansı Serisi (HİTEK
, cilt.1, ss.1-3, 2014 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı)
Irradiation Effect on Ta2O5 thin films
Defect and Diffusion Forum
, cilt.353, ss.205-210, 2014 (Scopus)
Effect of Curing Ambient on Poly Methacrylate Living Polymer
International Journal of Mechanical and Production Engineering
, cilt.2, sa.3, ss.55-57, 2014 (Hakemli Dergi)
Seryum Dioksit İlavesinin Zirkonyum Dioksitin Özelliklerine Etkisinin İncelenmesi
Mühendis ve Makina
, cilt.55, sa.652, ss.30-33, 2014 (Hakemli Dergi)
Investigation of Electrical Properties of CIGS Thin Films Derived by Sol Gel Process
TMS 2014, 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings
, cilt.1, sa.1, ss.379-381, 2014 (Hakemli Dergi)
Refractive Index and Extinction Coefficient of ZnO Al Thin Films Derived By Sol Gel Dip Coating Technique
Defect and Diffusion Forum
, cilt.334, sa.335, ss.290-293, 2013 (Scopus)
Thermochemical Boriding of Inconel 718 Superalloy
Academic Journal of Science
, cilt.2, sa.2, ss.385-389, 2013 (Hakemli Dergi)
Flaw Detection of Welded Joints Using Radiographic Examination
International Journal of Sciences
, cilt.2, sa.2, ss.391-396, 2013 (Hakemli Dergi)
Surface Characterization of Irradiated ZnO:Al Thin Film By The Reactor Neutrons
Defect and Diffusion Forum
, cilt.334335, ss.294-296, 2013 (Scopus)