SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Cuttability of coal from the Soma coalfield in Turkey
International Journal of Rock Mechanics and Mining Sciences
, cilt.73, ss.123-129, 2015 (SCI-Expanded)
Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
, cilt.48, sa.2, ss.269-282, 2011 (SCI-Expanded)
Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
, cilt.47, sa.1, ss.104-120, 2010 (SCI-Expanded)
Control of rock cutting efficiency by muck size
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
, cilt.45, sa.2, ss.278-288, 2008 (SCI-Expanded)
Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
, cilt.43, sa.1, ss.139-156, 2006 (SCI-Expanded)
Surface Settlement Prediction for Istanbul Metro tunnels via 3D FE and empirical methods
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
, cilt.0, ss.163-169, 2005 (SCI-Expanded)
Estimation of optimum specific energy based on rock properties for assessment of roadheader performance
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY
, cilt.104, sa.11, ss.633-641, 2004 (SCI-Expanded)
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY
, cilt.103, sa.9, ss.589-599, 2003 (SCI-Expanded)
The performance prediction of impact hammers from Schmidt hammer rebound values in Istanbul metro tunnel drivages
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
, cilt.17, sa.3, ss.237-247, 2002 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
Physical and Mechanical Properties of Rocks, Soils, and Coals
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.23-48, 2014 (Hakemli Dergi)
Large-Diameter Drill Rigs
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.295-306, 2014 (Hakemli Dergi)
Microtunnel Boring Machines and Jacking Forces
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.247-276, 2014 (Hakemli Dergi)
Mechanical Excavation in Mining and Civil Industries Introduction
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.1-11, 2014 (Hakemli Dergi)
Soft Ground Tunnel Boring Machines
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.203-246, 2014 (Hakemli Dergi)
Roadheaders
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.125-155, 2014 (Hakemli Dergi)
Mechanical Excavation in Coal Mines
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.307-322, 2014 (Hakemli Dergi)
Site Investigations for Mechanized Excavation Projects
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.13-21, 2014 (Hakemli Dergi)
Impact Hammers
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.157-168, 2014 (Hakemli Dergi)
Rock-Cutting Tools and Theories
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.49-76, 2014 (Hakemli Dergi)
Hard Rock TBMs
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.169-201, 2014 (Hakemli Dergi)
Shaft and Raise Boring Machines
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.277-293, 2014 (Hakemli Dergi)
Emerging Mechanical Excavation Technologies
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.341-353, 2014 (Hakemli Dergi)
Laboratory Rock-Cutting Tests
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.77-102, 2014 (Hakemli Dergi)
Chain Saw Machines
MECHANICAL EXCAVATION IN MINING AND CIVIL INDUSTRIES
, ss.323-339, 2014 (Hakemli Dergi)
A methane explosion during EPBM tunnelling
Tunnelling Journal
, ss.40-43, 2012 (Hakemli Dergi)
Roadheader applications in mining and tunneling
Mining Engineering
, cilt.50, sa.3, ss.14-19, 1998 (Scopus)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
Study of the impacts of geological-geotechnical parameters on the performance of raise boring machine (RBM) during pilot hole drilling
10th Asian Rock Mechanics Symposium “ARMS10”, 29 Ekim - 03 Kasım 2018
Determining the Effects of Physical, Mechanical and Textural Properties ofMetamorphic Stones on a Chisel Tool Performance
10th Asian Rock Mechanics Symposium The ISRM International Symposium for 2018, 29 Ekim - 03 Kasım 2018
On the development of robust performance risk indicators for hard rock TBMs
4th International Underground Excavations Symposium, İstanbul, Türkiye, 13 - 14 Eylül 2018, ss.173-178
Performance Evaluation of Raise Boring Machine (RBM) used in Balya Lead-Zinc Mine
4th International Underground Excavations Symposium, İstanbul, Türkiye, 13 - 14 Eylül 2018, ss.317-325
Effect of Soil Conditioning on Performance of an EPB TBM: from Laboratory to Mahmutbey-Mecidiyekoy Metro Tunnels in Turkey
World Tunnel Congress (WTC 2018), 21 - 26 Nisan 2018
Unrelieved Spesific Energy Estimation fromPLCM and FLCM Linear Rock Cutting Tests andComparison with Rock Properties
ITA - AITES WORLD TUNNEL CONGRESS, 21 - 26 Nisan 2018
Safety precautions against fuel leakage into NATM tunnels of Uskudar-Umraniye-Cekmekoy Metro project
World Tunnel Congress, 9 Haziran - 15 Eylül 2017
Factors Affecting the Selection of Raise Boring Machines (RBMs) and Case Studies from Turkey
26th International Symposium on Mine Planning Equipment Selection, Lulea, İsveç, 29 - 31 Ağustos 2017
Raise Boring Machine performance in the Yusufeli Dam and HEPP Project
World Tunnelling Congress, Bergen, Norveç, 9 - 15 Haziran 2017, ss.1-7
Effect of Adhesion on EPB TBM Performance
World Tunnel Congress 2017, Bergen, Norveç, 9 - 15 Haziran 2017
TBM Performance Prediction using PLCM and Comparison with TBM field Performance Parameters
World Tunnel Congress (WTC 2017), Bergen, Norveç, 1 - 04 Mayıs 2017, ss.7-0
Effect of Conditioning on Soil Workability Determined by Mini-Slump and Flow Table Tests
World Tunnel Congress (WTC 2017), Bergen, Norveç, 1 Temmuz - 04 Ocak 2017, ss.10-0
EPB TBM performance in Ayvali Waste Water Tunnel through marl clay sand and shallow overburden
2nd International Cenference on Tunnel Boring Machines in Difficult Grounds, İstanbul, Türkiye, 16 - 18 Kasım 2016, ss.201-215
Determining the effect of texture coefficient on performance wire machines of diamond
9th Asian Rock Mechanics Symposium “ARMS9”, Balvi, Letonya, 18 - 20 Ekim 2016
Determining the Effect of Texture Coefficient on Performance of Diamond Wire Machines
9th Asian Rock Mechanics Symposium-ARMS9, Bali, Endonezya, 01 Ekim 1016 - 04 Ekim 2016, ss.8-0
The relation between uniaxial compressive and Brazilian tensile strength
Eurock 2016, 29 - 31 Ağustos 2016
Foam Optimization and Relationship between Foam Use and EPB TBM Performance
3rd Eastern European Tunnelling Conference (EETC 2016), Prague, Çek Cumhuriyeti, 1 - 04 Haziran 2016, ss.8-0
Predicting Cutting Performance of Chisel Tools by Using Physical and Mechanical Properties of Natural Stones
European Rock Mechanics Symposium (EUROCK 2012, ISRM International Symposium), Stockholm, İsveç, 01 Mayıs 2016, ss.14-0
A model to predict the performance of EPB-TBMs in a complex geology in Istanbul
World Tunnelling Congress 2016, San Francisco, Amerika Birleşik Devletleri, 22 - 29 Nisan 2016, ss.1-10
Double disc cutter consumption of an EPB TBM in Tuzla Wastewater Tunnel
World Tunnel Congress, San-Francisco, Kostarika, 22 - 28 Nisan 2016
Investigation of the effect of textural properties towards sawability performance of diamond wire machines
2016 ISRM International Symposium “EUROCK 2016″, Niğde, Türkiye, 28 - 31 Ocak 2016, cilt.1, ss.211-215
The Effect of Mechanical Properties on Performance of Diamond Wire Machines
Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, Bangkok, Tayland, 1 - 04 Ekim 2015, ss.389-395
Physico-Mechanical Property Tests Towards Performance Prediction of Chain Saw Machines
Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, Bangkok, Tayland, 1 - 04 Ekim 2015, ss.381-387
Analysis of disc cutter consumption of a Double Shield TBM
WTC2015 World Tunnel Congress, Dubrovnik, Hırvatistan, 22 - 28 Mayıs 2015, ss.1-10
Performance of EPB TBM in Beylerbeyi Kucuksu Wastewater Tunnel in Istanbul
WTC2015 World Tunnel Congress, Dubrovnik, Hırvatistan, 22 - 28 Mayıs 2015, ss.1-10
A New Generation of Portable Linear Rock Cutting Machine (PLCM) and Comparison with Full Scale Linear Rock Cutting Tests
ITA World Tunnel Congress (WTC 2015), Dubrovnik, Hırvatistan, 1 - 04 Mayıs 2015, ss.10-0
Cutter Forces Measurement with PLCM Using Mini Conical Pick: Comparison with the Theoretical and Empirical Models
ITA World Tunnel Congress (WTC 2015), Dubrovnik, Hırvatistan, 1 - 04 Mayıs 2015, ss.8-0
Amasya-Suluova Bölgesinde Bir Kömür Ocağının Galeri Kazıları İçin Kollu Galeri Açma Makinesi Seçimi ve Performans Tahmini
Türkiye 19. Kömür Kongresi Sempozyumu, İstanbul, Türkiye, 21 - 23 Mayıs 2014, ss.87-104
Effect of some Geotechnical Properties on TBM Performance
European Rock Mechanics Symposium (EUROCK 2012, ISRM International Symposium), Stockholm, İsveç, 1 - 04 Mayıs 2012, ss.9-0
Rock Mechanics Aspects Related to Cutting Efficiency of Mechanical Excavators in Complex Geology
European Rock Mechanics Symposium (EUROCK 2012, ISRM International Symposium), Stockholm, İsveç, 1 - 04 Mayıs 2012, ss.13-0
Sürekli Yüzey Kazıcıların Seçim Kriterleri, Yenice-Sivas Barit Madeni
Türkiye 3. Maden Makinaları Sempozyumu, İzmir, Türkiye, 5 - 06 Mayıs 2011, ss.1-10
Zincirli Kesme Makinelerinin Performans Tahmini İçin Görgül Bir Model
Türkiye 3. Maden Makinaları Sempozyumu, İzmir, Türkiye, 5 - 06 Mayıs 2011, ss.55-65
Experience Gained on Machanized Tunnelling in Istanbul and Some Recommendations for Mining Industry
The 22nd World Mining Congress and Expo, İstanbul, Türkiye, 1 - 04 Mayıs 2011, ss.155-159
A Deterministic Model for Predicting and Optimizing Performance of Chain Saw Machines
The 22nd World Mining Congress and Expo, İstanbul, Türkiye, 1 - 04 Mayıs 2011, ss.175-181
Use of Laboratory Full Scale Cutting Tests for Surface Continuous Miners: A Case Study, Yenice-Barite Mine in Turkey
The 22nd World Mining Congress and Expo, İstanbul, Türkiye, 01 Mayıs 2011, ss.191-196
TTK Amasra Bölgesi Kalın Damarın Kesilebilirlik Özellikleri ve Mekanize Kazısı Üzerine Bazı Görüşler
Türkiye 17. Kömür Kongresi, Zonguldak, Türkiye, 2 - 04 Haziran 2010, ss.217-229
A model to predict the performance of tunneling machines under stressed conditions
World Tunnel Congress 2000, Johannesburg, Güney Afrika, 13 - 18 Mayıs 2000, ss.47-53
Studies on performance prediction of roadheaders based on field data in mining and tunnelling projects
4th International Symposium on Mine Mechanization and Automation, Brisbane, Avustralya, 6 - 09 Temmuz 1997, ss.41-49
Kitap & Kitap Bölümleri
İngilizce-Türkçe-Almanca Kömür Sözlüğü
Kömür Kimyası ve Teknolojisi, Kural, Orhan, Editör, Kurtiş Yayınevi, İstanbul, ss.873-943, 1991