Dr. Hasan Gökçe

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Mechanically alloyed and spark plasma sintered WNbMoVTa refractory high entropy alloys: Effects of Cr and Al on the microstructural and mechanical properties

Boztemur B., Bayrak K. G., Gökçe H., Ayas E., Balcı-Çağıran Ö., Derin C. B., et al.

Journal of Alloys and Compounds , cilt.965, 2023 (SCI-Expanded)

Influence of Ti and Nb addition on the microstructure, mechanical, and machinability properties of 316L stainless steel fabricated by powder metallurgy

Erden M. A., Uzun F. G., Akgün M., Gökçe H.

Materialpruefung/Materials Testing , cilt.65, sa.8, ss.1237-1253, 2023 (SCI-Expanded)

Microstructure-property evolution of mechanically alloyed Al-20 wt% Si matrix powders and sintered composites reinforced withTiB2 particulates

Gökçe H., Öveçoğlu M. L.

Engineering Science and Technology, an International Journal , cilt.39, 2023 (SCI-Expanded)

EVALUATION OF THE POTENTIAL OF BARIUM ZIRCONATE ON THE SINTERABILITY AND PROPERTIES OF BOVINE HYDROXYAPATITE

PAZARLIOĞLU S. S., Bakdemir S. A., Gökçe H.

Ceramics - Silikaty , cilt.67, sa.1, ss.120-134, 2023 (SCI-Expanded)

Powder metallurgical fabrication of graphene reinforced near-eutectic Al-Si matrix composites: Microstructural, mechanical and electrochemical characterization

Akçamlı N., Şenyurt B., Gökçe H., Ağaoğulları D.

Engineering Science and Technology, an International Journal , cilt.31, 2022 (SCI-Expanded)

Mechanochemical synthesis investigations on the ternary and quaternary B2O3/TiO2/Mg/C systems

Çelik F. N., Tekoğlu E., Mertdinç S., Gökçe H., Öveçoğlu M. L., Ağaoğulları D.

Solid State Sciences , cilt.128, 2022 (SCI-Expanded)

Synthesis and cytotoxicity analysis of porous beta-TCP/starch bioceramics

Turan Y., Kalkandelen C., PALACI Y., ŞAHİN A., Gökçe H., GÜNDÜZ O., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.58, ss.487-494, 2022 (SCI-Expanded)

Synthesis and characterization of (HfMoTiWZr)C high entropy carbide ceramics

Kavak S., Bayrak K. G., Bellek M., Mertdinç S., Muhaffel F., Gökçe H., et al.

CERAMICS INTERNATIONAL , cilt.48, sa.6, ss.7695-7705, 2022 (SCI-Expanded)

Potential Glass Network for IR Applications and Rare-Earth Ions

Kabalci I., Gokce H., Korpe N. O.

ACTA PHYSICA POLONICA A , cilt.140, sa.3, ss.222-227, 2021 (SCI-Expanded)

The effect of lanthanum addition on the microstructure and mechanical properties of Mg-modified hydroxyapatite ceramics

Pazarlioglu S., Algan O., Isikogullari A. M., Gökçe H.

PROCESSING AND APPLICATION OF CERAMICS , cilt.15, sa.3, ss.226-237, 2021 (SCI-Expanded)

Morphology, characterization, and conversion of the corals Goniopora spp. and Porites cylindrica to hydroxyapatite

Akyol S., Nissan B. B., Karacan I., Yetmez M., Gokce H., Suggett D. J., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.55, sa.3, ss.893-901, 2019 (SCI-Expanded)

Effect of cryomilling on matrix/reinforcement interfaces and properties of Al-TiB2 composites

Balci O., Ağaoğulları D., Gokce H., Öveçoğlu M. L., Somer M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.757, ss.393-402, 2018 (SCI-Expanded)

The natural nano-bioceramic powder production from organ pipe red coral (Tubipora musica) by a simple chemical conversion method

Karacan I., GÜNDÜZ O., Ozyegin L. S., Gokce H., Ben-Nissan B., AKYOL S., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.54, sa.2, ss.317-329, 2018 (SCI-Expanded)

Thermomechanical properties of aluminium titanate (Al2TiO5)-reinforced forsterite (Mg2SiO4) ceramic composites

Kucuk I., BOYRAZ T., Gokce H., Öveçoğlu M. L.

CERAMICS INTERNATIONAL , cilt.44, sa.7, ss.8277-8282, 2018 (SCI-Expanded)

INVESTIGATION OF INDENTATION FRACTURE TOUGHNESS (K-IC) AND WEIBULL PARAMETERS OF 0.25Li(2)O.2SiO(2)-0.75BaO.2SiO(2) GLASS-CERAMIC

Ertug B., Cetiner B. N., GOKCE H., Erkmen Z. E., Öveçoğlu M. L.

ARCHIVES OF METALLURGY AND MATERIALS , cilt.62, sa.4, ss.1963-1968, 2017 (SCI-Expanded)

Effect of Severe Plastic Deformation on Wear Properties of Aluminum Matrix Composites

Karademir I., Unal O., Ates S., Gokce H., Gok M. S.

ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.487-489, 2017 (SCI-Expanded)

Hydroxyapatite Synthesis from Fish Bones: Atlantic Salmon (Salmon Salar)

Komur B., Altun E., Aydogdu M. O., Bilgic D., Gokce H., Ekren N., et al.

ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.400-402, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

Physical Characterization of Turbot (Psetta Maxima) Originated Natural Hydroxyapatite

Inan A. T., Komur B., Ekren N., Aydogdu M. O., Gokce H., Ficai A., et al.

ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.397-399, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

Processing and characterization of graphene nano-platelet (GNP) reinforced aluminum matrix composites

Akcamli N., Gokce H., UZUNSOY D.

MATERIALS TESTING , cilt.58, ss.946-952, 2016 (SCI-Expanded)

The effect of La2O3 on the microstructure and room temperature mechanical properties of t-ZrO2

Nilufer I. B., GOKCE H., MUHAFFEL F., Öveçoğlu M. L., Çimenoğlu H.

CERAMICS INTERNATIONAL , cilt.42, sa.8, ss.9443-9447, 2016 (SCI-Expanded)

The Effect of Milling Time and Sintering Temperature on Crystallization of BaFe12O19 Phase and Magnetic Properties of Ba-Hexaferrite Magnet

Sadullahoglu G., ERTUG B., GOKCE H., Altuncevahir B., Ozturk M., Topkaya R., et al.

ACTA PHYSICA POLONICA A , cilt.128, sa.3, ss.377-382, 2015 (SCI-Expanded)

Hydroxyapatite Lanthanum Oxide Composites

Bozkurt Y., Pazarlioglu S., Gokce H., Gurler I., Salman S.

ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1407-1409, 2015 (SCI-Expanded)

Nano-bioceramic synthesis from tropical sea snail shells (Tiger Cowrie - Cypraea Tigris) with simple chemical treatment

Şahin Y., GÜNDÜZ O., Bulut B., Özyeʇin L., Gökçe H., Aʇaoʇullari D., et al.

Acta Physica Polonica A , cilt.127, sa.4, ss.1055-1058, 2015 (SCI-Expanded)

The Effect of Yttrium Oxide Reinforcement on the Microstructural and Mechanical Properties of Biologically Derived Hydroxyapatite

Bozkurt Y., Gokce H., Pazarlioglu S., Salman S.

ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1403-1406, 2015 (SCI-Expanded)

Preparation and evaluation of cerium oxide-bovine hydroxyapatite composites for biomedical engineering applications

Gunduz O., Gode C., Ahmad Z., Gokce H., Yetmez M., Kalkandelen C., et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.35, ss.70-76, 2014 (SCI-Expanded)

Investigation of Infrared and Raman Spectra of TeO2-Nb2O5-TiO2 Glasses

Kabalci I., Gokce H.

ACTA PHYSICA POLONICA A , cilt.125, sa.4, ss.877-881, 2014 (SCI-Expanded)

Influence of TiB2 particle size on the microstructure and properties of Al matrix composites prepared via mechanical alloying and pressureless sintering

Balci O., AGAOGULLARI D., GOKCE H., Duman I., Öveçoğlu M. L.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.586, 2014 (SCI-Expanded)

Investigation of infrared and raman spectra of TeO2-Nb 2O5TiO2 glasses

Kabalci I., Gökçe H.

Acta Physica Polonica A , cilt.125, sa.4, ss.877-881, 2014 (SCI-Expanded)

Effect of sintering on the microstructural and mechanical properties of meleagris gallopova hydroxyapatite

PAZARLIOĞLU S. S., Gokce H., Ozyegin S., SALMAN S.

BIO-MEDICAL MATERIALS AND ENGINEERING , cilt.24, sa.4, ss.1751-1769, 2014 (SCI-Expanded)

Comparative investigations of the activated sintered W-1 wt.% Ni composites reinforced with various oxide and boride particles

Ağaoğulları D., BALCI O., GOKCE H., Öveçoğlu M. L., Duman I.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS , cilt.41, ss.577-584, 2013 (SCI-Expanded)

The Effect of Mechanical Alloying on the Microhardness and Fracture Toughness of BaTiO3

ERTUG B., Cetiner B. N., SADULLAHOGLU G., GOKCE H., Erkmen Z. E., Öveçoğlu M. L.

ACTA PHYSICA POLONICA A , cilt.123, sa.2, ss.188-190, 2013 (SCI-Expanded)

Effect of Different Phosphorus Precursors on Biomimetic Hydroxyapatite Powder Properties

Karakas A., Yoruc A. B. H., Gokce H., Karabulut A., Erdogan D. C.

ACTA PHYSICA POLONICA A , cilt.123, sa.2, ss.418-420, 2013 (SCI-Expanded)

Characterization investigations of W-Ni matrix composites reinforced with TiB2 and La2O3

Gökçe H., Balcı O., Agaogullar D., Demirkan O., Genç A. G., Öveçoğlu M. L., et al.

Acta Physica Polonica A , cilt.123, sa.2, ss.309-311, 2013 (SCI-Expanded)

Microstructural and Mechanical Properties of Hot-pressed (B4C, SiC)/TiB2 Composites

AKARSU A. C., Gökçe H., ERTUĞ B., ADDEMIR A. O., Öveçoğlu M. L., Boyraz T.

CFI-CERAMIC FORUM INTERNATIONAL , cilt.89, 2012 (SCI-Expanded)

Influences of metallic Co and mechanical alloying on the microstructural and mechanical properties of TiB2 ceramics prepared via pressureless sintering

Ağaoğulları D., GOKCE H., Duman I., Öveçoğlu M. L.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.32, sa.9, ss.1949-1956, 2012 (SCI-Expanded)

Synthesis of Magnesium Borates by Mechanically Activated Annealing

Ağaoğulları D., BALCI O., GOKCE H., Duman I., Öveçoğlu M. L.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.7, ss.2520-2533, 2012 (SCI-Expanded)

Aluminum diboride synthesis from elemental powders by mechanical alloying and annealing

Ağaoğulları D., GOKCE H., Duman I., Öveçoğlu M. L.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.32, sa.7, ss.1457-1462, 2012 (SCI-Expanded)

Synthesis, microstructure, and mechanical properties of WC-TiC-Co ceramic composites

Duman D., Gökçe H., Çimenoğlu H.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.32, sa.7, ss.1427-1433, 2012 (SCI-Expanded)

Characterization investigations of ZrB2/ZrC ceramic powders synthesized by mechanical alloying of elemental Zr, B and C blends

Ağaoğulları D., GOKCE H., Duman I., Öveçoğlu M. L.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.32, sa.7, ss.1447-1455, 2012 (SCI-Expanded)

Bioceramic production from sea urchins

Ağaoğulları D., Kel D., Gökçe H., Duman I., Öveçoğlu M. L., Akarsubaşi A., et al.

Acta Physica Polonica A , cilt.121, sa.1, ss.23-26, 2012 (SCI-Expanded)

Characterization of microstructural and thermal properties of steatite/cordierite ceramics prepared by using natural raw materials

Gokce H., AGAOGULLARI D., Öveçoğlu M. L., Duman I., Boyraz T.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.31, sa.14, ss.2741-2747, 2011 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Structural and characterisation analysis of zinc-substituted hydroxyapatite with wet chemical precipitation method

Karacan I., Senturk D., Oktar F. N., Ficai A., Ficai D., Trusca R., et al.

International Journal of Nano and Biomaterials , cilt.6, sa.3-4, ss.188-204, 2016 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Synthesis and characterization investigations of laboratory- synthesized VB-VB2-V3B4 reinforced Al-7wt.% Si composites via mechanical alloying and pressureless sintering

Mertdinç S., Tekoğlu E., GÖKÇE H., Ağaoğulları D., Öveçoğlu M. L.

International Conference on Functional Materials and Metallurgy, ICFMM 2016, Shanghai, Çin, 3 - 05 Ağustos 2016, cilt.263 SSP, ss.189-194

Metrikler

Yayın

Atıf (WoS)

430

H-İndeks (WoS)

Atıf (Scopus)

651

H-İndeks (Scopus)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Açık Erişim