SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Experimental and numerical investigation of lubrication system for reciprocating compressor
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
, cilt.108, ss.224-233, 2019 (SCI-Expanded)
Performance evaluation of RANS-based turbulence models in simulating a honeycomb heat sink
Heat and Mass Transfer/Waerme- und Stoffuebertragung
, cilt.53, sa.7, ss.2435-2443, 2017 (SCI-Expanded)
GEOMETRIC MODIFICATIONS TO MINIMIZE LIFT ACTING ON A SIMPLIFIED FRONT WINDSHIELD WIPER BLADE
ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology
, cilt.0, sa.36, ss.103-109, 2016 (SCI-Expanded)
EFFECTS OF WALL HEATING ON BOUNDARY LAYER TRANSITION OVER A FLAT PLATE
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY
, cilt.35, sa.1, ss.59-68, 2015 (SCI-Expanded)
Inverse design of a mixed convection problem via Proper Orthogonal Decomposition
Türk ısı Bilimi ve Tekniği Dergisi
, cilt.0, 2014 (SCI-Expanded)
HEAT TRANSFER ENHANCEMENT BEHIND A BACKWARD FACING STEP WITH ACTIVE FLOW CONTROL
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY
, cilt.34, sa.2, ss.129-141, 2014 (SCI-Expanded)
Spatio temporal structures of buoyancy induced flow in a vertical channel
Numerical Heat Transfer Part A
, cilt.32, sa.1, ss.51-62, 2014 (SCI-Expanded)
POD Reconstruction of a Transitional Boundary Layer with and without Control
PHYSICS OF FLUIDS
, cilt.16, ss.2763-2784, 2004 (SCI-Expanded)
Three dimensional convective cooling in a vertical channel with flush mounted heat sources
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
, cilt.46, sa.5, ss.791-808, 2003 (SCI-Expanded)
Low dimensional modeling of non isothermal twin jet flow
FLUID DYNAMICS RESEARCH
, cilt.30, sa.1, ss.1-30, 2002 (SCI-Expanded)
A modeling approach to transitional channel flow
Computers and Fluids
, cilt.27, sa.1, ss.121-136, 1998 (SCI-Expanded)
A Reduced Dynamical Model of Convective Flows in Tall Laterally Heated Cavities
Proceedings: Mathematical, Physical and Engineering Sciences
, cilt.453, sa.1958, ss.663-672, 1997 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
Mikrokanallarda cidar kayma gerilmesi ve basınç farkının sayısal olarak incelenmesi
Pamukkale Üniversitesi Mühendislik Dergisi
, cilt.24, sa.1, ss.19-24, 2018 (Hakemli Dergi)
Improving Aerodynamic Performance for a Reliable Wiper System
INTERNATİONAL JOURNAL OF AUTOMOTİVE ENGİNEERİNG AND TECHNOLOGİES
, cilt.6, sa.1, ss.30-40, 2017 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
On the CFD Modeling Approach of Lubrication System for a Hermetic ReciprocatingCompressor: Sliding Mesh vs Moving Reference Frame
24th International Compressor Engineering Conference, 9 - 12 Temmuz 2018
Numerical Investigation of Turbulent Flow over a Windscreen Wiper Blade
ASME 2016-International Mechanical Engineering Congress and Exposition (IMECE), Phoenix, Amerika Birleşik Devletleri, 11 - 17 Kasım 2016, ss.1
Numerical and Analytical Investigation of Viscous Fluids in a Screw Extruder
ASME 2016-International Mechanical Engineering Congress and Exposition (IMECE), Phoenix, Amerika Birleşik Devletleri, 11 - 17 Kasım 2016, ss.1
A Computational Study on Pressure Drop and Shear Stress in Microchannels for Cell Behaviour
RS Microfludics Conference, Bilbao, İspanya, 4 - 06 Kasım 2015, ss.221
Active Flow Control Behind a Backward Facing Step Using A Zero-Net-Mass-Flux System
Proceedings of the 5th International Conference on Jets Wakes and Separated Flows ICJWSF2015, 15 - 18 Haziran 2015
Active Flow Control behind a BFS Using a Zero-Net-Mass-Flux-System
Int. Conf. on Jets, Wakes and Separated Flows, Stockholm, İsveç, 16 - 18 Haziran 2015, ss.1
A Numerical Model of Fluid Structure Interaction Of a Fluttering Valve
Proceedings of the 5th International Conference on Jets Wakes and Separated Flows ICJWSF2015, 15 - 18 Haziran 2015
POD Analysis of Jet and Vortex Flows Induced by Oscillating BFS
Int. Conf. on Jets, Wakes and Separated Flows, Stockholm, İsveç, 16 - 18 Haziran 2015, ss.1
Experimental Investigation of Oil Flowrate in a Hermetic Reciprocating Compressor
ESDA2014-20044, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, Kopenhag, Danimarka, 25 - 27 Haziran 2014, ss.1
A Parametric Investigation of Jet and Vortex Actuator
Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, Kopenhag, Danimarka, 25 - 27 Haziran 2014, ss.1
Numerical Simulation of Lubrication System in a Hermetic Reciprocating Compressor
ESDA2014-20044, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, Kopenhag, Danimarka, 25 - 27 Haziran 2014, ss.1
Yersel Emme ve Üfleme ile Ters Basamak Ardındaki Akış Kontrolü ve Isı Transferinin İyileştirilmesi
III. Ulusal Havacılıkta İleri Teknolojiler Konferansı, HİTEK 2014, İstanbul, Türkiye, 18 - 19 Haziran 2014, ss.1
Heat Transfer Enhancement behind a Backward Facing Step Using Localized Suction and Blowing
Proceedings of CONV-14, Int. Symp. on Convective Heat and Mass Transfer, Aydın, Türkiye, 8 - 13 Haziran 2014, ss.1
Boundary Layer Separation Control on an Inclined Plate Using Jet and Vortex Actuator
ASME 2013-International Mechanical Engineering Congress and Exposition (IMECE), San Diego, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, ss.1
Numerical Investigation of JaVA-Induced Flow in Quiescent Water
ASME 2013-International Mechanical Engineering Congress and Exposition (IMECE), San Diego, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, ss.1
Hermetik Bir Kompresördeki Yağ Debisinin Sayısal İncelenemesi
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.1
Hermetik Bir Kompresördeki Yağ Debisinin Deneysel İncelenemesi
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.1
Numerical Investigation of Oil Flow in a Hermetic Compressor
Proceedings of the 2013 International Conference on Mechanics, Fluids, Heat, Elasticity and Electromagnetic Fields, Venedik, İtalya, 1 - 02 Ocak 2013, ss.1
Experimental Investigation of Jet and Vortex Actuator Using Particle Image Velocimetry
ASME 2012-International Mechanical Engineering Congress and Exposition (IMECE), Houston, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.1
Active Flow Control with an Oscillating Backward Facing Step in a Shallow Open Channel
ASME 2012-International Mechanical Engineering Congress and Exposition (IMECE), Houston, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.1
Active Flow Control with an Oscillating Backward Facing Step
Proceedings of the ASME 2012 11th Biennial Conference on Engineering System Design and Analysis ESDA2012, Nantes, Fransa, 2 - 04 Haziran 2012, ss.1
Optimization of a centrifugal fan impeller using Kriging-simulated annealing
ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), Denver, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, ss.1
Proper orthogonal decomposition analysis of JaVA flows for cross flow conditions
ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), Denver, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, ss.1
A Kriging-simulated annealing meta-algorithm for optimization of convective heat transfer in a grooved channel
ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), Denver, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, ss.1
Flow visualizations of jet and vortex actuator under cross flow conditions
7. International Conference on Computational Heat and Mass Transfer (ICCHMT),, İstanbul, Türkiye, 18 - 22 Haziran 2011, ss.1
Flow separation control behind a backward facing step
7. International Conference on Computational Heat and Mass Transfer (ICCHMT),, İstanbul, Türkiye, 18 - 22 Haziran 2011, ss.1
On the Use of POD Models for Convective Flow in a Grooved Channel
ESDA2010-24892, Proceedings of the ASME 2010 10th Biennial Conference on Engineering System Design and Analysis ESDA2010, İstanbul, Türkiye, 12 - 14 Haziran 2010, ss.1
Modeling and Inverse Design of Convective Heat Transfer in a Grooved Channel Using Proper Orthogonal Decomposition
IMECE2009-10780, ASME International Mechanical Engineering Congress & Exposition, Orlando, Amerika Birleşik Devletleri, 13 - 19 Kasım 2009, ss.1
Numerical Simulation of Mixed Convection in a Rectangular Cavity with Multiple Heat Sources
IMECE2009-11472, ASME International Mechanical Engineering Congress & Exposition, Orlando, Amerika Birleşik Devletleri, 13 - 19 Kasım 2009, ss.1
Taşınımla Isı Transferinin Kriging –Benzetilmiş Tavlama ile Modellenmesi ve Optimizasyonu
Bilimde Modern Yöntemler Sempozyumu, Eskişehir, Türkiye, 15 - 17 Ekim 2008, ss.1
Akış Kontrolü İçin Jet ve Vorteks Aktüatör (JaVA) Akış Tiplerinin Deneysel İncelenmesi
II. Ulusal Havacılık ve Uzay Konferansı İTÜ, İstanbul, Türkiye, 15 - 17 Ekim 2008, ss.1
Temporal Analysis of Jet and Vortex Actuator (JaVA)-induced Flows
International Conference on Jets, Wakes and Separated Flows, Berlin, Almanya, 16 - 19 Eylül 2008, ss.1
An Experimental Investigation of Jet and Vortex Actuator for Active Flow Control
4th AIAA Flow Control Conference / Actuator Induced Flow Types, Seattle, Amerika Birleşik Devletleri, 23 - 26 Haziran 2008, ss.1
A reduced order model of a weakly confined twin jet flow and its stability analysis
ASME Fluid Engineering Division Summer Meeting, Amerika Birleşik Devletleri, 29 Mayıs - 01 Haziran 2001, ss.695-702
Identification Of Coherent Structures in Driven Cavity Flows Using Proper Orthogonal Decomposition
International Symposium on Transport Phenomena, 3 - 05 Nisan 1996, ss.203-208