Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Recycling of NdFeB magnets: Model supported iron minimization via in-situ hydrolysis during leaching and hematite precipitation in an autoclave

Emil-Kaya E., Kaya O., Stopic S., Gürmen S., Friedrich B.
Hydrometallurgy , cilt.222, 2023 (SCI-Expanded) identifier

Development of hydrogen reduction method for La–Fe–Si materials from oxalate precursors

Ateş S., Karaağaç Ö., Köçkar H., Gürmen S.
CANADIAN METALLURGICAL QUARTERLY , cilt.1, sa.1, ss.1, 2023 (SCI-Expanded)

Comparison of production of mixed rare earth oxide (Nd/Pr oxide) powders by different precipitation agents from NdFeB magnets’ water leaching

Emil E., Uysal E., Gürmen S.
CANADIAN METALLURGICAL QUARTERLY , cilt.1, sa.1, ss.1, 2023 (SCI-Expanded)

Pulse ultrasonication leaching approach for selective Li leaching from spent LFP cathode material

Uysal E., Yeşiltepe Özçelik D., Gürmen S.
CANADIAN METALLURGICAL QUARTERLY , cilt.1, sa.1, ss.1, 2023 (SCI-Expanded)

Nd Recovery from Wastewater with Magnetic Calcium Alginate ((1,4)-β-d-Mannuronic Acid and α-L-Guluronic Acid) Hydrogels

Uysal E., Emil E., Yeşiltepe Özçelik D., Gürmen S.
ACS OMEGA , cilt.1, sa.1, ss.1-17, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

The production of pH indicator Ca and Cu alginate ((1,4)- β -d-mannuronic acid and α -l-guluronic acid) cryogels containing anthocyanin obtained via red cabbage extraction for monitoring chicken fillet freshness

Dikmetaş D. N., Uysal E., Karbancıoğlu Güler H. F., Gürmen S.
International Journal of Biological Macromolecules , cilt.231, 2023 (SCI-Expanded) identifier identifier identifier

Recycling of NdFeB magnets employing oxidation, selective leaching, and iron precipitation in an autoclave

Emil-Kaya E., Polat B., Stopic S., Gürmen S., Friedrich B.
RSC Advances , cilt.13, sa.2, ss.1320-1332, 2023 (SCI-Expanded) Creative Commons License identifier identifier identifier

Hydrometallurgical recycling of waste NdFeB magnets: design of experiment, optimisation of low concentrations of sulphuric acid leaching and process analysis

Uysal E., Al S., Emil-Kaya E., Stopic S., Gürmen S., Friedrich B.
CANADIAN METALLURGICAL QUARTERLY , cilt.62, sa.1, ss.107-118, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Porous, columnar shaped iron rich oxide synthesis for lithium-ion batteries from metallurgical grade, domestic, high carbon ferro-chromium alloys

Gülcan M. F., Karahan B. D., Gürmen S.
Journal of Alloys and Compounds , cilt.922, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Production of rare earth element oxide powders by solution combustion: a new approach for recycling of NdFeB magnets

Emil-Kaya E., Stopic S., Gürmen S., Friedrich B.
RSC ADVANCES , cilt.12, sa.48, ss.31478-31488, 2022 (SCI-Expanded) Creative Commons License Sürdürülebilir Kalkınma identifier identifier identifier

Recovery of Rare Earth Elements from Spent NdFeB-Magnets: Separation of Iron through Reductive Smelting of the Oxidized Material (Second Part)

Chung H., Stopic S., Emil-Kaya E., Gürmen S., Friedrich B.
METALS , cilt.12, sa.10, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Recovery of Rare Earth Elements through Spent NdFeB Magnet Oxidation (First Part)

Stopic S., Polat B., Chung H., Emil-Kaya E., Smiljanic S., Gürmen S., et al.
METALS , cilt.12, sa.9, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Synthesis of calcium, copper and iron alginate hydrogels doped with Ag nanoparticles produced by chemical reduction method

Uysal E., Ateş S., Safaltın Ş., Dikmetaş D. N., Devecioğlu D., Karbancıoğlu Güler H. F., et al.
MATERIALS CHEMISTRY AND PHYSICS , cilt.281, 2022 (SCI-Expanded) identifier identifier

Synthesis, structural and magnetic characterization of spherical high entropy alloy CoCuFeNi particles by hydrogen reduction assisted ultrasonic spray pyrolysis

Kucukelyas B., Safaltın Ş., Sam E. D., Gürmen S.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.113, ss.306-315, 2022 (SCI-Expanded) identifier identifier

Mixed Oxides NiO/ZnO/Al2O3 Synthesized in a Single Step via Ultrasonic Spray Pyrolysis (USP) Method

Yeşiltepe Özçelik D., Ebin B., Stopic S., Gürmen S., Friedrich B.
METALS , cilt.12, ss.73, 2022 (SCI-Expanded)

Performance comparison of FeNiCo, FeNiCu and FeNiCoCu alloy particles as catalyst material for polymer electrolyte membrane fuel cells

Ateş S., Tari D., Safaltın Ş., Kucukelyas B., Yeşiltepe Özçelik D., Gürmen S.
REACTION KINETICS MECHANISMS AND CATALYSIS , cilt.134, sa.2, ss.811-822, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

One Step Production of Silver-Copper (AgCu) Nanoparticles

Koroglu M., Ebin B., Stopic S., Gürmen S., Friedrich B.
METALS , cilt.11, sa.9, 2021 (SCI-Expanded) identifier identifier

NdFeB Magnets Recycling Process: An Alternative Method to Produce Mixed Rare Earth Oxide from Scrap NdFeB Magnets

Kaya E. E., Kaya O., Stopic S., Gürmen S., Friedrich B.
METALS , cilt.11, sa.5, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Leaching of iron and chromium from an indigenous ferro chromium alloy via a rotary evaporator: optimum conditions determination and kinetic analysis

Gulcan M. F., Karahan B. D., Gürmen S.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.9, sa.6, ss.14103-14115, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Molecular dynamics simulation of size, temperature, heating and cooling rates on structural formation of Ag-Cu-Ni ternary nanoparticles (Ag-34-Cu-33-Ni-33)

Safaltın Ş., Gürmen S.
COMPUTATIONAL MATERIALS SCIENCE , cilt.183, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Novel Strategy for One-Step Production of Attenuated Ag-Containing AgCu/ZnO Antibacterial-Antifungal Nanocomposite Particles

Cakmak T., Kaya E. E., Kucuk D., Ebin B., BALCI O., Gürmen S.
POWDER METALLURGY AND METAL CERAMICS , cilt.59, ss.261-270, 2020 (SCI-Expanded) identifier identifier

Fabrication and characterization of Yb-doped Y2O3 powders and thin films

Kaya E. E., Unal F., Kazmanli K., Gürmen S.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.7, ss.559-566, 2020 (SCI-Expanded) identifier identifier

Recovery of Diamond and Cobalt Powder from Polycrystalline Drawing Die Blanks via Ultrasound-Assisted Leaching Process-Part 1: Process Design and Efficiencies

Kiessling F., Stopic S., Gürmen S., Friedrich B.
METALS , cilt.10, sa.6, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Recovery of Diamond and Cobalt Powders from Polycrystalline Drawing Die Blanks via Ultrasound Assisted Leaching Process-Part 2: Kinetics and Mechanisms

Kiessling F., Stopic S., Gürmen S., Friedrich B.
METALS , cilt.10, sa.6, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

New Proposal for Size and Size-Distribution Evaluation of Nanoparticles Synthesized via Ultrasonic Spray Pyrolysis Using Search Algorithm Based on Image-Processing Technique

Kaya E. E., Kaya O., Alkan G., Gürmen S., Stopic S., Friedrich B.
MATERIALS , cilt.13, sa.1, 2020 (SCI-Expanded) identifier identifier identifier

A straightforward approach for the synthesis of nanostructured Y2O3 particles: Synthesis, morphology, microstructure and crystal imperfection

Kaya E. E., Gürmen S.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES , cilt.115, 2020 (SCI-Expanded) identifier identifier

Oxidative degradation of Bisphenol A by carbocatalytic activation of persulfate and peroxymonosulfate with reduced graphene oxide

Olmez-Hanci T., Arslan-Alaton I., Gürmen S., GAFARLI I., Khoei S., Safaltın Ş., et al.
Journal of Hazardous Materials , cilt.360, ss.141-149, 2018 (SCI-Expanded) identifier identifier

Tuning the Morphology of ZnO Nanostructures with the Ultrasonic Spray Pyrolysis Process

Emil E., Alkan G., Gürmen S., Rudolf R., Jenko D., Friedrich B.
METALS , cilt.8, sa.8, 2018 (SCI-Expanded) identifier identifier

Estimation of yttrium oxide microstructural parameters using the Williamson-Hall analysis

EMİL E., Gürmen S.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.34, sa.13, ss.1549-1557, 2018 (SCI-Expanded) identifier identifier

Synthesis, structural and magnetic characterization of soft magnetic nanocrystalline ternary FeNiCo particles

Toparli C., Ebin B., Gürmen S.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS , cilt.423, ss.133-139, 2017 (SCI-Expanded) identifier identifier

Synthesis structural and magnetic characterization of soft magnetic nanocrystalline ternay FeNiCo particles

Toparlı Ç., Ebin B., Gürmen S.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS , cilt.423, ss.133-139, 2017 (SCI-Expanded)

Single Step Production of Nanostructured Copper Nickel CuNi and Copper Nickel Indium CuNiIn Alloy Particles

Apaydın R. O., Ebin B., Gürmen S.
Metallurgical and Materials Transactions A , cilt.47, sa.7, ss.3744-3752, 2016 (SCI-Expanded)

Preparation and electrochemical properties of nanocrystalline LiBxMn2 xO4 cathode particles for Li ion batteries by ultrasonic spray pyrolysis method

Burçak E., Göran L., Gürmen S.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.620, ss.399-406, 2015 (SCI-Expanded)

Comparison of 4 V and 3 V electrochemical properties of nanocrystalline LiMn2O4 cathode particles in lithium ion batteries prepared by ultrasonic spray pyrolysis

Ebin B., BATTAGLIA V., Gürmen S.
CERAMICS INTERNATIONAL , cilt.40, sa.5, ss.7029-7035, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Photocatalytic studies of Ag/ZnO nanocomposite particles produced via ultrasonic spray pyrolysis method

Dermenci K. B., GENC B., EBIN B., OLMEZ-HANCI T., Gürmen S.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.586, ss.267-273, 2014 (SCI-Expanded) identifier identifier

Preparation and electrochemical properties of spinel LiFexCuyMn1.2O4 by ultrasonic spray pyrolysis

Ebin B., Gürmen S., Lindbergh G.
CERAMICS INTERNATIONAL , cilt.40, sa.1, ss.1019-1027, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Reduction and characterizations of iron particles: influence of reduction parameters

Karaagac O., Kockar H., EBIN B., Gürmen S.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.24, sa.7, ss.2602-2609, 2013 (SCI-Expanded) identifier identifier

Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)

Ebin B., Gencer O., Gürmen S.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.104, sa.2, ss.199-206, 2013 (SCI-Expanded) identifier identifier

Production of nanocrystalline silver particles by hydrogen reduction of silver nitrate aerosol droplets

Ebin B., Yazıcı E., Gürmen S.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.23, sa.3, ss.841-848, 2013 (SCI-Expanded)

Preparation and magnetic characterization of Fe metal oxide nanocomposite particles by means of hydrogen reduction assisted ultrasonic spray pyrolysis USP HR

Ebin B., Toparli Ç., KAZMANLI M. K., Gürmen S.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.104, sa.5, ss.483-488, 2013 (SCI-Expanded)

Electrochemical properties of nanocrystalline LiCuxMn2-xO4 (x=0.2-0.6) particles prepared by ultrasonic spray pyrolysis method

Ebin B., Gürmen S., Lindbergh G.
MATERIALS CHEMISTRY AND PHYSICS , cilt.136, ss.424-430, 2012 (SCI-Expanded) identifier identifier

Electrochemical properties of nanocrystalline LiFexMn2-xO4 (x=0.2-1.0) cathode particles prepared by ultrasonic spray pyrolysis method

EBIN B., Gürmen S., Arslan C., Lindbergh G.
ELECTROCHIMICA ACTA , cilt.76, ss.368-374, 2012 (SCI-Expanded) identifier identifier

Production and characterization of ZnO nanoparticles and porous particles by ultrasonic spray pyrolysis using a zinc nitrate precursor

Ebin B., ARIG E., OZKAL B., Gürmen S.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS , cilt.19, sa.7, ss.651-656, 2012 (SCI-Expanded) identifier identifier

Production and characterization of the wrinkled pea-like ZnO Particles by ultrasonic spray pyrolysis method using zinc acetate precursor

Ebin B., Arig E., Özkal B., Gürmen S.
Metall , cilt.65, sa.12, ss.578-582, 2011 (SCI-Expanded) identifier

Synthesis and Characterization of Nickel Particles by Hydrogen Reduction Assisted Ultrasonic Spray Pyrolysis USP HR Method

Ebin B., Gürmen S.
KONA POWDER AND PARTICLE JOURNAL , cilt.0, sa.29, ss.134-140, 2011 (SCI-Expanded)

Production and characterization of the nanostructured hollow iron oxide spheres and nanoparticles by aerosol route

Gürmen S., EBIN B.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.492, ss.585-589, 2010 (SCI-Expanded) identifier identifier

Synthesis of nano-crystalline spherical cobalt-iron (Co-Fe) alloy particles by ultrasonic spray pyrolysis and hydrogen reduction

Gürmen S., GUVEN A., EBIN B., STOPIC S., FRIEDRICH B.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.481, ss.600-604, 2009 (SCI-Expanded) identifier identifier

Nanocrystalline spherical iron-nickel (Fe-Ni) alloy particles prepared by ultrasonic spray pyrolysis and hydrogen reduction (USP-HR)

Gürmen S., EBIN B., STOPIC S., FRIEDRICH B.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.480, sa.2, ss.529-533, 2009 (SCI-Expanded) identifier identifier

Synthesis of nanosized spherical cobalt powder by ultrasonic spray pyrolysis

Guermen S., STOPIC S., FRIEDRICH B.
MATERIALS RESEARCH BULLETIN , cilt.41, sa.10, ss.1882-1890, 2006 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

The behavior of organic components in copper recovery from electroless plating bath effluents using 3D electrode systems

Orhan G., GURMEN S., Timur S. İ.
JOURNAL OF HAZARDOUS MATERIALS , cilt.112, sa.3, ss.261-267, 2004 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Studies on leaching of massive rich copper ore in acidic ferric sulfate solutions

Arslan F., BULUT G., KANGAL M. O., PEREK K. T., GUL A., Gurmen S.
SCANDINAVIAN JOURNAL OF METALLURGY , cilt.33, sa.1, ss.6-14, 2004 (SCI-Expanded) identifier identifier

A laboratory-scale investigation of alkaline zinc electrowinning

Gurmen S., EMRE M.
MINERALS ENGINEERING , cilt.16, sa.6, ss.559-562, 2003 (SCI-Expanded) identifier identifier

Tungsten powder production from scheelite concentrates

GÜRMEN S., Timur S. İ., ORHAN G.
METALS , cilt.57, sa.12, ss.789-793, 2003 (SCI-Expanded)

Gewinnung von Kupfer und Zink aus Fällprodukten

GURMEN S., TIMUR S. İ., Duman İ.
METALL , cilt.1, ss.40-44, 2003 (SCI-Expanded)

Production of pure tungsten oxide from scheelite concentrates

Gurmen S., Timur S. İ., Arslan C., Duman I.
SCANDINAVIAN JOURNAL OF METALLURGY , cilt.31, sa.3, ss.221-228, 2002 (SCI-Expanded) identifier identifier

Extraction of copper and zinc from precipitates

GÜRMEN S., Timur S. İ., DUMAN İ.
METALS , cilt.57, ss.40-44, 2002 (SCI-Expanded)

Acidic leaching of scheelite concentrate and production of hetero-poly-tungstate salt

Gurmen S., Timur S. İ., Arslan C., Duman I.
HYDROMETALLURGY , cilt.51, sa.2, ss.227-238, 1999 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Lab-scale chromium electrowinning in a diaphragm-type cell: effect of anode material and the head between the catholyte and anolyte levels (Δh)

Arslan C., Gürmen S., Arslan F., Elçin G. A. O.
SCIREA Journal of Metallurgical Engineering , cilt.5, sa.1, ss.1-14, 2022 (Hakemli Dergi)

NiO/ZnO Nanokompozit Partiküllerinin Sol-Jel Tekniği İle Üretimi

YEŞİLTEPE D., GÜRMEN S.
Gazi Mühendislik Bilimleri Dergisi , cilt.4, sa.1, ss.9-15, 2018 (Hakemli Dergi)

FeNiCoCu Yüksek Entropi Alaşım Nano Partiküllerin Aeresol Tekniği İle Üretimi

KÜÇÜKELYAS B., SAFALTIN Ş., GÜRMEN S.
Metalurji Dergisi , 2017 (Hakemsiz Dergi)

Ni/ZnO ve NiO/ZnO Nanokompozit Partiküllerinin Üretimi: Ultrasonik Sprey Piroliz (USP) Tekniği

YEŞİLTEPE D., GÜRMEN S.
Metalurji Dergisi , 2016 (Hakemli Dergi)

DEMİR GRUBU (FeNiCo) ALAŞIM NANO PARTİKÜLLERİNİN YAKIT HÜCRELERİNDE KULLANIMINA YÖNELİK ELEKTROT TASARIMI VE MODELLEME ÇALIŞMALARI

Safaltın Ş., Küçükelyas B., İslamoğlu M., Toparlı Ç., Gürmen S.
Metalurji Dergisi , sa.176, ss.26-32, 2015 (Hakemsiz Dergi) Sürdürülebilir Kalkınma

Antibakteriyel ve Antifungal Özellikte Gümüş İçeriği Azaltılmış Bakır(Cu)Gümüş(Ag)/Çinkooksit(ZnO) Nanokompozit Partiküllerinin Üretimi ve Karakterizasyonu

Çakmak T., EMİL E., Ebin B., BALCI O., GÜRMEN S.
Metakurji Dergisi , 2015 (Hakemli Dergi)

Antibakteriyel Nanokristalin Gümüş Partiküllerinin Ultrasonik Sprey Piroliz (USP) Tekniği Kullanılarak Üretimi ve Karakterizasyonu

GÜRMEN S., Ebin B., ÖZKAL B.
Metalurji Dergisi , 2009 (Hakemli Dergi)

Nanopartiküller ve Üretim Yöntemleri – 2 (Nanoyapılı Demir ve Bakır Partiküllerinin Ultrasonik Sprey Piroliz ve Hidrojen Redüksyionu Yöntemi ile Üretimi)

GÜRMEN S., Ebin B.
Metalurji Dergisi , 2008 (Hakemli Dergi)

Nanopartiküller ve Üretim Yöntemleri – 1

GÜRMEN S., Ebin B.
Metalurji Dergisi , 2008 (Hakemli Dergi)

Recovery of Nano-Sized Cobalt Powder from Cemented Carbide Scrap

GÜRMEN S.
Turkish J. Eng. Env. Sci. , cilt.29, ss.343-350, 2005 (Hakemli Dergi)

Copper refining electrolysis at high current densities

Gürmen S., Orhan G., Arslan C., Timur S.
Bulletin of the Technical University of Istanbul , cilt.54, sa.2, ss.40-44, 2004 (Scopus) identifier

Baskı Devrelerin Geri Kazanımı

Emre M., GURMEN S., TIMUR S. İ., Duman İ.
meta dünyası , 1999 (Hakemli Dergi)

Elektronik Hurdaların Değerlendirilmesinde Yeni Bir Proses

GURMEN S., Duman İ.
metal düyası , sa.65, ss.70-72, 1998 (Hakemli Dergi)

Elektronik Hurdaların Hazırlanmasında Yeni Bir Proses

GÜRMEN S., DUMAN İ.
Metal Dünyası , 1998 (Hakemli Dergi)

İkincil Demir-Dışı Hammaddelerin Değerlendirilmesi

GURMEN S., Duman İ.
metal dünyası , ss.54-56, 1998 (Hakemli Dergi)

Einwirkung der Schlackenzusammensetzung auf das Korrosionsverhalten der feuerfesten Steine in den Kupferraffinationsöfen

GURMEN S., Duman İ.
Keramische Zeitshrift , sa.49, ss.14-18, 1997 (Hakemli Dergi)

Norddeutsche Affineri Üzerine Genel Bir Bakış

GURMEN S., Duman İ.
Metal Dünyaı , sa.37, ss.69-74, 1996 (Hakemli Dergi)

Norddeutsche Affinerie Üzerine Genel Bir Bakış

GÜRMEN S., DUMAN İ.
Metal Dünyası , 1996 (Hakemli Dergi)

Alüminyum Hurdalarının Geri Kazanılması

ÜNLÜ N., GÜRMEN S., ALTMIŞOĞLU A., ERUSLU M. N.
Metalurji , ss.74-78, 1994 (Hakemli Dergi)

Sementit Karbür Esaslı Malzemelerin Toz Metalurjisi ile Üretimi

GÜRMEN S., Öveçoğlu M. L.
Metal Dünyası , 1993 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Comparison of Methods to Produce Rare Earth Oxide from Scrap NdFeB Magnets

Emil E., Stopic S., Gürmen S., Freidrich B.
Materials Science and Engineering Congress (MSE2022), Darmstadt, Almanya, 27 - 29 Eylül 2022, ss.1

Pyrometallurgical Recovery of Rare Earth Elements from oxidized spent NdFeB-magnets via Carbothermic Reduction

Chung H., Stopic S., Emil E., Gürmen S., Freidrich B.
nternational solvent extraction conference- ISEC 2022, Gothenburg, İsveç, 26 - 30 Eylül 2022, ss.1

EFFECT OF CALCINATION TEMPERATURE ON MgAl₂O₄ NANOPARTICLES PRODUCTION BY SOL–GEL METHOD

Yeşiltepe Özçelik D., Gürmen S.
21 International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.653

IRON REMOVAL FROM NDFEB WASTE MAGNET SOLUTIONS USING SODIUM ALGINATE SOLUTION

Uysal E., Emil E., Al S., Gürmen S.
21 International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 Ekim - 08 Kasım 2022, ss.112-113 Sürdürülebilir Kalkınma

RECYCLING OF CORRODED NDFEB MAGNETS BY HYDROMETALLURGICAL ROUTE

Emil E., Uysal E., Stopic S., Gürmen S., Friedrich B.
INTERNATIONAL SOLVENT EXTRACTION CONFERENCE 2022, Gothenburg, İsveç, 26 - 30 Eylül 2022, ss.1

Elektrikli araçlar için anot tasarımı ve malzeme seçimi

Durer A., Sarıkaş E., Arslan Y., Korkman M., Şavran A., Keleş Ö., et al.
5th International Symposium on Materials for Energy Storage and Conversion (mESC-IS 2021), 14 - 17 Eylül 2021

Elektrikli araçlar için batarya paketlerinin tasarımı ve malzeme seçimi

Alçın S., Güneş C., Temel Ş., Öztürk H., Zeki E., Peköz G., et al.
5th International Symposium on Materials for Energy Storage and Conversion (mESC-IS 2021), 14 - 17 Eylül 2021

Lityum iyon bataryaların geri dönüşümü üzerine karşılaştırmalı çalışma

Oğuz O., Berkman O., Gül Y. E., Gürsoy A. S., Bayboğa E., Keleş Ö., et al.
5th International Symposium on Materials for Energy Storage and Conversion (mESC-IS 2021), 14 - 17 Eylül 2021 Sürdürülebilir Kalkınma

Elektrikli Araçlar için Katot Tasarımı ve Yol Haritası

Çelik S., Güllü F. K., Yıldız Y. H., Çat S., Keleş Ö., Gürmen S.
5th International Symposium on Materials for Energy Storage and Conversion (mESC-IS 2021), 14 Eylül - 17 Ekim 2021

LaFeSi Based Magnetocaloric Material Production by Hydrogen Reduction Method from Their Oxalate Powders and Production Optimization

ATEŞ S., KARAAĞAÇ Ö., KÖÇKAR H., GÜRMEN S.
International Materials Technologies and Metallurgy Conference, 31 Ekim - 01 Kasım 2019

Rare Earth Metal Oxide Production from Scrap Magnets

Al S., Altan D., Çağrı A., Soylu E., Ateş S., Tarı D., et al.
International Materials Technologies and Metallurgy Conference 2019, 31 Ekim - 01 Kasım 2019

In2O3 Recovery from Scrap Liquid Crystal Displays

Tarı D., Ebin B., GÜRMEN S.
International Materials Technologies and Metallurgy Conference 2019, 31 Ekim - 01 Kasım 2019

LaFeSi Based Magnetocaloric Production by Hydrogen Reduction Method from Their Oxalate Powders and Production Optimization

Ateş S., KARAAĞAÇ Ö., KÖÇKAR H., GÜRMEN S.
International Materials Technologies and Metallurgy Conference 2019, 31 Ekim - 01 Kasım 2019

Production of In2O3 ZnO (IZO) Nanocomposite Particles by Sol Gel Method

YEŞİLTEPE D., GÜRMEN S.
nternational Materials Technologies and Metallurgy Conference 2019, 31 Ekim - 01 Kasım 2019

Realization of Four-Terminal Switching Lattices: Technology Development and Circuit Modeling

Safaltın Ş., Gencer O., Morgül M. C., Aksoy L., Gürmen S., Moritz C. A., et al.
Design, Automation & Test in Europe Conference & Exhibition (DATE), Florence, İtalya, 25 - 29 Mart 2019, ss.504-509 identifier identifier

Performance Comparison of Diff erent Alloy Particles as Catalyst Materials for PolymerElectrolyte Membrane Fuel Cells

ATEŞ S., Tarı D., SAFALTIN Ş., KÜÇÜKELYAS B., YEŞİLTEPE D., GÜRMEN S.
International Metallurgy and Materials Congress, 25 - 27 Ekim 2018

Reduced Graphene Oxide/FeNiCoCu Catalyst Materials Production, Characterization for PEMFC Its Electrochemical Modelling Studies, and Performance Comparison

Tarı D., ATEŞ S., SAFALTIN Ş., KÜÇÜKELYAS B., YEŞİLTEPE D., GÜRMEN S.
International Metallurgy and Materials Congress, 25 - 27 Ekim 2018

Computational Fluid Dynamics Investigation of a Smelting Cyclone

SAFALTIN Ş., GÜRMEN S.
IMMC2018, 19th International MetallurgyMaterials Congress, 25 - 27 Ekim 2018

Preparing Alginate based Hydrogels with Different Compositions and Additives for Wound Dressing Applications

Erdemir F., Akoğlu S., Küçükkeçeci H., Tugay Y., YEŞİLTEPE D., SAFALTIN Ş., et al.
IMMC2018, 19th International Metallurgy Materials Congress, 25 - 27 Ekim 2018

Influence of Ytterbium Addition on the Microstructural Parameters of Nanostructured Yttrium Oxide Synthesized via Aerosol Route

EMİL E., GÜRMEN S.
IMMC2018, 19th International Metallurgy Materials Congress, 25 - 27 Ekim 2018

Microstructural Investigation of Nanostructured Er-Doped Yttrium Oxide Powders

ÜNAL F., EMİL E., GÜRMEN S., KAZMANLI M. K., ÜRGEN M. K.
IMMC 2018: 19th International Metallurgy Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.614-617

Th e Eff ect of Calcination Temperature, Time and Dopant Rate on Crystallite Size of Doped Y2O3 Nanopowders

ÜNAL F., KAYA F., GÜRMEN S., KAZMANLI M. K., ÜRGEN M. K.
IMMC 2018: 19th International Metallurgy Materials Congress, 25 - 27 Ekim 2018, ss.643-646

Reduced Graphene Oxide/NiO/ZnO Composite Particles Production via Ultrasonic Spray Pyrolysis Method

YEŞİLTEPE D., SAFALTIN Ş., GÜRMEN S.
IMMC2018, 19th International Metallurgy Materials Congress, 25 - 27 Ekim 2018

Cathodoluminescence Studies and Characterization of Yb Doped Y2O3 Synthesized by WetChemical Method

EMİL E., ÜNAL F., KAZMANLI M. K., GÜRMEN S.
IMMC 2018: 19th International Metallurgy and Materials Congress, Türkiye, 25 - 27 Ekim 2018, ss.639-642

PROCESSING AND CHARACTERIZATION OF EQUATOMIC FENICUALLOYS VIA MECHANICAL ALLOYING

KÜÇÜKELYAS B., KAYKILARLI C., SAFALTIN Ş., AKÇAMLI N., UZUNSOY D., GÜRMEN S.
2nd International Conference on Engineering Technology and Innovation (ICETI), 7 - 11 Mart 2018

Production and Characterization of TZM Based TiC or ZrC Reinforced Composites Prepared by Spark Plasma Sintering

Tüzemen C., YAVAŞ B., AKIN KARADAYI İ., GÜRMEN S., YÜCEL O., ŞAHİN F., et al.
MST 2018, 11 - 15 Mart 2018

Production and Characterization of Eqatomic FeNiCu Alloys via Mechanical Alloying

KÜÇÜKELYAS B., SAFALTIN Ş., GÜRMEN S.
ICETI 2018, 7 - 11 Mart 2018

Investigation of Photoluminescence Properties of Eu-Doped Y2O3 Powders

ÜNAL F., GÜRMEN S., KAZMANLI M. K., ÜRGEN M. K.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.599

Performance Comparison of FeNiCo and FeNİCoCu Alloy Particles as Different Catalyst Materials for Polymer Electrolyte Membrane Fuel Cells

KÜÇÜKELYAS B., SAFALTIN Ş., GÜRMEN S., Ateş S., Tarı D., Özdemir O.
MTM 2017, İstanbul, Türkiye, 26 - 27 Ekim 2017

Modeling and Simulation of Residual Stresses in Vertical DC Cast AA 5083 Slabs

Sürmeli M., Türkmani M., Tuluk D., Çakır A., SAFALTIN Ş., KAZMANLI M. K., et al.
MTM 2017, 26 - 27 Ekim 2017

Synthesis of Nanostructured Silver Particles by Technical Scale Aerosol Route

EMİL E., Alkan G., GÜRMEN S., Friedrich B.
International Materials Technologies and Metallurgy Congress, 26 - 27 Ekim 2017

Synthesis of NiO/ZnO Nanocomposite Particles by Ultrasonic Spray Pyrolysis (USP) Method

YEŞİLTEPE D., GÜRMEN S.
IMSTEC 2017, 11 - 13 Ekim 2017

X-Ray Peak Broadening Analysis and Characterization of Sub-micron Y2O3 Particles Synthesized by Ultrasonic Spray Pyrolysis Method

EMİL E., GÜRMEN S.
EUROMAT 2017, 17 - 22 Eylül 2017

Optical Properties of Y2O3 and Er-Doped Y2O3 Thin Films

ÜNAL F., GÜRMEN S., KAZMANLI M. K., ÜRGEN M. K.
EUROMAT 2017, 17 - 22 Eylül 2017

Characterization of Yb3 Doped Y2O3 Thin Films Prepared by Electron Beam Evaporation Method

ÜNAL F., EMİL E., GÜRMEN S., KAZMANLI M. K., ÜRGEN M. K.
EUROMAT 2017, 17 - 22 Eylül 2017

A Novel Production Approach for FeNiCoCu High Entropy Alloys

KÜÇÜKELYAS B., SAFALTIN Ş., ŞAM PARMAK E. D., GÜRMEN S.
EUROMAT 2017, Selanik, Yunanistan, 17 - 22 Eylül 2017

Production and Structural Characterization of nanocrystalline ternary AgCuNi Nanoparticles by Ultrasonic Spray Pyrolysis Technique (USP)

SAFALTIN Ş., GÜRMEN S.
EUROMAT 2017, Selanik, Yunanistan, 17 - 22 Eylül 2017

An Aerosol Route to Produce NiO/ZnO Nanocomposite Particles

YEŞİLTEPE D., SAFALTIN Ş., GÜRMEN S.
EUROMAT 2017, 17 - 22 Eylül 2017

Enhanced Hydrophilicity Of Polymeric Membrane For Oil-Water Separation With The Addition Of Graphene Oxide

Kavak S., Polat H. M., Tarkuç S., Memiç T. N., SAFALTIN Ş., GÜRMEN S.
International Porous Powder Materials, 12 - 15 Eylül 2017

NUMERICAL SIMULATION OF RESIDUAL STRESSES IN AL 5083 SLAB BASED ON FINITE VOLUME METHOD

Safaltın Ş., Gürmen S.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.630-633

Production of High Refractory Y2O3 Submicron Particles by the Ultrasonic Spray Pyrolysis (USP) and Sol-Gel Methods

Arslan D., Tüysüz O., Eker T., Yudar E., Emil E., Safaltın Ş., et al.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.276-278

Production and Characterization of Undoped and Doped Y2O3 Thin Films

ÜNAL F., GÜRMEN S., KAZMANLI M. K., ÜRGEN M. K.
18th International Metallurgy&Materials Congress, 29 Eylül - 01 Ekim 2016

Production and Characterization of Undopped and Er Doped Y2O3 Thin Films

ÜNAL F., GÜRMEN S., KAZMANLI M. K., ÜRGEN M. K.
18th International Metallurgy and Materials Congress, 29 Eylül - 01 Ekim 2016, ss.300

Production of Nano Zinc Oxide ZnO by Hydrothermal Method

YEŞİLTEPE D., GÜRMEN S.
18th International Metallurgy&Materials Congress, 29 Eylül - 01 Ekim 2016

Recovery of iron in the form of submicron hematite (-Fe2O3) particles from steel industry pickling solution by ultrasonic spray pyrolysis (USP)

Kırcı B., Ebin B., GÜRMEN S.
Circular Materials Conference, 11 - 12 Mayıs 2016

Production of Sub Micron Fe3O4 Particles From Steel Industry Pickling Solutions by Ultraconic Sprey Prolysis USP and Ferrofluid Materials

Çakmak T., Alten M. A., Buyukkircali B., Bagdatli M., Ocak M. S., KAZMANLI M. K., et al.
PPM 2015: International Porous Powders and Materials, 15 - 18 Eylül 2015

Production and structural characterization of Y2O3 Nanoparticles by Ultrasonic Spray Pyrolysis Technique

Emil E., Çakmak T., Safaltın Ş., Gürmen S.
Porous Powder Materials 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.40-44

Production of Sub-Micron Fe3O4 Particles From Steel Industry Pickling Solutions by Ultrasonic Spray Pyrolysis (USP) and Ferrofluid Material

Çakmak T., GÜRMEN S.
International Porous Powder Materials 2015, 6 - 09 Eylül 2015

Production and Structural Characterization of Y2O3 Nanoparticles by Ultrasonic Spray Pyrolysis Technique (USP)

EMİL E., Çakmak T., SAFALTIN Ş., GÜRMEN S.
International Porous Powder Materials 2015, 3 - 06 Eylül 2015

Ultrasonik Sprey Piroliz Ve Hidrojen Redüksiyonu(USP-HR) Tekniği İle Üretilmiş CuAg/ZnO Nanokompozit Partiküllerinin Kaplama Yöntemiyle Kumaşlara Aktarılması

Küçük D., EMİL E., Çakmak T., SAFALTIN Ş., Ebin B., GÜRMEN S., et al.
15. Tekstil Teknolojisi ve Kimyasındaki Son Gelişmeler Sempozyumu, Bursa, Türkiye, 1 - 16 Mayıs 2015

Improving the Reversible Cyclability of the Si Based Composite Thin Film Anodes

SÖNMEZ M. Ş., DERİN C. B., KELEŞ Ö., GÜRMEN S.
17th International Metallurgy & Materials Congress Proceedings, Energy Materials, 11 - 13 Eylül 2014, ss.508-517

Recycled Lead Acid Paste as an Anode Material for Li-Ion Batteries

Sönmez M. Ş., Derin C. B., Keleş Ö., Gürmen S.
IMMC 17. International Metallurgy and Materials Congress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.523-531

Recycled Lead Acid Battery Paste as an Anode Materials For Li-Ion Batteries

SÖNMEZ M. Ş., DERİN C. B., KELEŞ Ö., GÜRMEN S.
17th International Metallurgy and Materials Congress, 11 - 13 Eylül 2014, ss.523-531

Production of NiO/Al2O3 Nanosized Catalysts by Ultrasonic Spray Pyrolysis Process

Şen T., Ebin B., GÜRMEN S.
MMC2014, 17th International MetallurgyMaterials Congress, 11 - 13 Eylül 2014

Production of Copper Tin (CuSn) Alloy Nanoparticles by Aerosol Process

Ebin B., GÜRMEN S.
17th International MetallurgyMaterials Congress, 11 - 13 Eylül 2014

Production of CuAg/ZnO Nanocomposite Particles by Ultrasonic Spray Pyrolysis

Ebin B., BALCI O., GÜRMEN S.
MST 2014, 16 - 20 Şubat 2014

PRODUCTION AND CHARACTERIZATION OF SUBMICRON HEMATITE (alpha-Fe2O3) PARTICLES BY ULTRASONIC SPRAY PYROLYSIS METHOD

Kirci B., Ebin B., Gürmen S.
3rd International Congress on Advances in Applied Physics and Materials Science, Antalya, Türkiye, 24 - 28 Nisan 2013, cilt.1569, ss.265-268 identifier identifier

Direct Production Of Nanostructured Copper-Nickel (Cu-Ni) Alloy Particles

Apaydin R. O., Ebin B., Gürmen S.
3rd International Congress on Advances in Applied Physics and Materials Science, Antalya, Türkiye, 24 - 28 Nisan 2013, cilt.1569, ss.57-60 identifier identifier

Production and Characterization of Submicron Hematite (α-Fe2O3) Particles by Ultrasonic Spray Pyrolysis Method

Kırcı B., Ebin B., GÜRMEN S.
APMAS 2013, 3rd International Advances in Applied Physics Materials Science Congress, 24 - 28 Nisan 2013

Production and Characterization of Nano-crsytalline Spherical Copper-Indium (Cu-In) Alloys by Ultrasonic Spray Pyrolysis and Hydrogen Reduction (USP-HR)

Oğuzhan Ramazan A., Ebin B., GÜRMEN S.
TMS2013 142nd Annual Meeting Exhibition, 3 - 07 Mart 2013

Production of Nanostructured ZnFe2O4 Particles via Ultrasonic Spray Pyrolysis Method

DERMENCİ K. B., Ebin B., GÜRMEN S.
TMS2013 142nd Annual Meeting Exhibition, 3 - 07 Mart 2013

SYNTHESIS AND CHARACTERIZATION OF NANOCRYSTALLINE NICKEL/ZINC OXIDE PARTICLES BY ULTRASONIC SPRAY PYROLYSIS

Koc I., Ebin B., Gürmen S.
Materials Science and Technology Conference (MS and T), Pennsylvania, Amerika Birleşik Devletleri, 7 - 12 Ekim 2012, cilt.240, ss.239-246 identifier

IRON-NICKEL-COBALT (Fe-Ni-Co) ALLOY PARTICLES PREPARED BY ULTRASONIC SPRAY PYROLYSIS AND HYDROGEN REDUCTION (USP-HR) METHOD

Toparli C., Ebin B., Gürmen S.
Materials Science and Technology Conference (MS and T), Pennsylvania, Amerika Birleşik Devletleri, 7 - 12 Ekim 2012, cilt.240, ss.247-254 identifier

Production And Characterization of Lead Based Electrodes Recovered From Lead Acid Battery Paste Used In LIB

ÖZKAYA A., KÖKEN G., YENİCİ B., YIĞILI M., ÖZBEK D., KOÇER M., et al.
ABAA 5. International Conference on Advanced Lithium Batteries for Automobile Applications, 17 - 20 Eylül 2012

19th International Symposium on Metastable

KARAAĞAÇ Ö., KÖÇKAR H., Ebin B., GÜRMEN S.
ISMANAM: Amorphous and Nanostructured Materials, 18 - 22 Eylül 2012

Preparation and Electrochemical Performance of Multiphase Li-Cu-Mn-O Cathode Particles

Ebin B., GÜRMEN S.
5th Int. Conference on Advanced Li-Batteries for Automobile Applications,Congress, 17 - 20 Eylül 2012

Synthesis and Structural Characterization of Nano Lead Oxide Particles via Ultrasonic Spray Pyrolysis Technique

Aşık B., DERMENCİ K. B., Ebin B., GÜRMEN S.
IMMC 2012, 16th International Metallurgy Materials Congress, 13 - 15 Eylül 2012

Production of Nanostructured Silver-Copper (Ag–Cu) Alloy Particles Via Ultrasonic Spray Pyrolysis and Hydrogen Reduction (USP-HR),

köroğlu m., DERMENCİ K. B., Toparlı Ç., Ebin B., Alper Tunga A., GÜRMEN S.
NanoTR-VIII (Nano Science and Nano Technology), Ankara, Türkiye, 25 - 29 Haziran 2012

Photocatalytic Activity of 10% Co-doped ZnO Nanoparticles

Dermenci K., Apaydın R., Ebin B., GENC B., Ölmez Hancı T., Gürmen S.
NanoTR VIII - 8th Nanoscience and Nanotechnology Conference, Ankara, Türkiye, 25 - 28 Haziran 2012, ss.100

Production of spherical Ag/ZnO nanocomposite particles for photocatalytic applications

DERMENCİ K. B., Ebin B., GÜRMEN S.
Proceedings of International Conference on Engineering Materials and Applications, 11 - 15 Haziran 2012

Preparation of Pb Free Solder (Cu–Ag-Sn) Particles by Ultrasonic Spray Pyrolysis and Hydrogen Reduction (USP-HR) Method

Toparlı Ç., Ebin B., GÜRMEN S.
141st TMS Annual Meeting Exhibition, 11 - 15 Mart 2012

Preparation and magnetic characterization of submicron range iron spheres

KARAAĞAÇ Ö., Ebin B., KÖÇKAR H., GÜRMEN S.
20th International Conference on Soft Magnetic Materials, 18 - 22 Eylül 2011

Production of Fe/MgO Nanoparticles with Ultrasonic Spray Pyrolysis (USP) Tecnique

Toparlı Ç., Ebin B., Cömert M. F., Yalman İ., GÜRMEN S.
NanoTR-VII (Nano Science and Technology), İstanbul, Türkiye, 27 Haziran - 01 Temmuz 2011

Synthesis and Characterization of Cu-Doped ZnO Nanostructures by Sol-Gel Method

Apaydın O. R., Ebin B., GÜRMEN S.
NanoTR-VII (Nano Science and Technology), İstanbul, Türkiye, 27 Haziran - 01 Temmuz 2011

Production of Cu0.94Ni0.06O Spherical Nanostructured Particles via Ultrasonic Spray Pyrolysis Method

DERMENCİ K. B., Ebin B., GÜRMEN S.
NanoTR-VII (Nano Science and Nano Technology), İstanbul, Türkiye, 27 Haziran - 01 Temmuz 2011

Investigation of Application Antibacterial Agents with Conventional and Nano Finishing Chemicals in the same Bath

BALCI O., Turan F., Ebin B., GÜRMEN S.
11th World textile Conference Autex, 8 - 10 Haziran 2011

Preparation and Electrochemical Properties of Nanostructured Lithium Manganese Oxide Based Cathode Particles

Ebin B., Gürmen S., Arslan C.
TMS 140th Annual Meeting and Exhibition, San Diego, Amerika Birleşik Devletleri, 27 Şubat - 03 Mart 2011

Synthesis of Nanocrystalline Cu3B2O6 Particles by Ultrasonic Spray Pyrolysis Method

Ebin B., Gürmen S., Arslan C.
TMS 140th Annual Meeting and Exhibition, California, Amerika Birleşik Devletleri, 27 Şubat - 03 Mart 2011, ss.631-634 identifier

Aerosol Route Synthesis of Lithium Borate Spheres Using Lithium Nitrate and Boric Acid Solution

Ebin B., Gürmen S., Arslan C.
TMS 140th Annual Meeting and Exhibition, California, Amerika Birleşik Devletleri, 27 Şubat - 03 Mart 2011, ss.625-630 identifier identifier

Ultrasonik Destekli Sol-Jel Yöntemiyle Üretilen CuO Nanoyapılarında Kristal Büyümesinin İncelenmesi

Ebin B., Gürmen S., Arslan C.
15th International Metallurgical and Materials Congress, İstanbul, Türkiye, 11 - 13 Kasım 2010

Investigation of Crystal Growth on CuO Nanostructures Produced by Ultrasonic Assisted Sol-Gel Process

Ebin B., GÜRMEN S., ARSLAN C.
15th International Metallurgical and Materials Congress, 11 - 13 Kasım 2010

Synthesis of Nanocrystalline Lead Oxide Particles by Ultrasonic Spray Pyrolysis Method

Ebin B., Gürmen S., Arslan C.
Powder Metallurgy World Congress and Exhibition PM2010, Florence, İtalya, 10 - 14 Ekim 2010, ss.407-410

Synthesis of Alumina Nanoparticles by Heat Treatment of Thermal Decomposed Aluminium Sulfate Aerosol Droplets

Ebin B., GÜRMEN S.
PM2010 Powder Metallurgy World Congress Exhibition, 10 - 14 Ekim 2010

Synthesis and Structural Characterization of LiZn0.5Mn1.5O4 Cathode Materials

Ebin B., Gürmen S., Arslan C.
NanoTR-VI Nanoscience and Nanotechnology Conference, İzmir, Türkiye, 14 - 18 Haziran 2010, ss.249

Synthesis of Copper Nanoparticles from Copper Nitrate Solution by Ultrasonic Spray Pyrolysis (USP)

Ebin B., Gencer O., GÜRMEN S.
Copper - 2010 Conference Exhibition, 6 - 10 Haziran 2010

Preparation and Characterization of Nanocrystalline Silver Particles

Ebin B., Yazici E., Gürmen S., Özkal B.
TMS 2010 Annual Meeting Supplemental Proceedings on Materials Processing and Properties, Washington, Amerika Birleşik Devletleri, 14 - 18 Şubat 2010, ss.571-576 identifier

Synthesis of Ag/ZnO Nanocomposite Particles by Ultrasonic Spray Pyrolysis Method

Gürmen S., Ebin B.
TMS 2010 Annual Meeting Supplemental Proceedings on Materials Processing and Properties, Washington, Amerika Birleşik Devletleri, 14 - 18 Şubat 2010, ss.829-834 identifier

Aerosol Route Synthesis of Copper Oxide Nanoparticles Using Copper Nitrate Solution

Ebin B., Gencer O., Gürmen S.
TMS 2010 Annual Meeting Supplemental Proceedings on Materials Processing and Properties, Washington, Amerika Birleşik Devletleri, 14 - 18 Şubat 2010, ss.577-582 identifier

Evaluation of High Energy Milling Behavior of ZnO Powders in Different Milling Conditions

YAKAR S. S., SOYLER A. U., Özkal B., Gürmen S., Öveçoğlu M. L.
TMS 2010 Annual Meeting Supplemental Proceedings on Materials Processing and Properties, Washington, Amerika Birleşik Devletleri, 14 - 18 Şubat 2010, ss.769-776 identifier identifier

Effects of Alloying Elements in Ultrasonic Route Produced Iron Nanoparticles on Their Oxidation Behaviour

Ebin B., GÜRMEN S.
NanoMats 2009 International Conferance on Nanomaterials and Nanosystems, 10 - 13 Ağustos 2009

Fabrication and Characterization of the ZnO Nanoparticles

Ebin B., GÜRMEN S., Arığ E., ÖZKAL B.
NanoMats 2009 International Conferance on Nanomaterials and Nanosystems, 10 - 13 Ağustos 2009

Nickel Cobalt Oxide Nanoparticles Synthesized by Ultrasonic Spray Pyrolysis

GÜRMEN S., Ebin B.
NanoTR-V (Nano Science and Nano Technology ), Eskişehir, Türkiye, 8 - 12 Haziran 2009

O., Preparation of Silver Nanoparticle (AgNP) Doped ZnO-PVA Composite Powders by Spray Drying and their Antibacterial Activity Behavior

Duman Ş., GÜRMEN S., ÖZKAL B., Yamamoto O.
Nanotech Insight 09, 29 - 31 Mart 2009

Preparation of Zinc Oxide Nanostructures from Zinc Sulfate and Zinc Nitrate Precursors

Gürmen S., Ebin B., Özkal B.
138th TMS Annual Meeting and Exhibition, San-Francisco, Kostarika, 15 - 19 Şubat 2009, ss.607-612 identifier

Preparation of Nanostructured Iron Oxide Particles via Ultrasonic Spray Pyrolysis

Ebin B., Gürmen S., Arslan C.
TMS 2009 Annual Meeting and Exhibition, San Francisco, Amerika Birleşik Devletleri, 15 - 19 Şubat 2009

OPTIMIZATION OF MILLING CONDITIONS FOR THE PRODUCTION OF FINE SILVER POWDERS

Yumakgil H. K., Goekce H., Özkal B., Gürmen S., Oevecoglu M. L.
138th TMS Annual Meeting and Exhibition, San-Francisco, Kostarika, 15 - 19 Şubat 2009, ss.771-776 identifier

reparation of Nanostructured Iron Oxide Particles via Ultrasonic Spray Pyrolysis

Ebin B., GÜRMEN S., ARSLAN C.
TMS 2009 Annual Meeting and Exhibition, 15 - 19 Şubat 2009

Preparation of Zinc Oxide Nanostructures from Zinc Sulfate and Zinc Nitrate Precursor

GÜRMEN S., Ebin B., ÖZKAL B.
TMS 2009 Annual Meeting and Exhibition, 15 - 19 Şubat 2009

Effect of mechanical alloying on the sintering behaviour of WC/Co hardmetal system

Pestreli D., Ebin B., Özkal B., Gürmen S.
7th International Conference on Tungsten, Refractory and Hardmaterials 2008, Washington, Amerika Birleşik Devletleri, 8 - 12 Haziran 2008, ss.329-337 identifier

Preparation of nanostructured iron particles via ultrasonic spray pyrolysis (USP) and hydrogen reduction (HR)

Ebin B., Gürmen S., Özkal B., Pestreli D.
2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008, Washington, Amerika Birleşik Devletleri, 8 - 12 Haziran 2008, ss.9197-9202 identifier

Yüksek Akım Yoğunluklarında Bakır Rafinasyon Elektrolizinde Hücre Dizaynı

Arslan C., Gürmen S., Duman İ., Aksoylu B.
14th International Metallurgical and Materials Congress, İstanbul, Türkiye, 16 - 19 Ekim 2008

Volfram Hurdalarından Saf Volframoksit Üretimi

DUMAN İ., GÜRMEN S., Ertürk S., Ağaoğulları D.
14. Uluslararası Metalurji ve Malzeme Kongresi, 16 - 18 Ekim 2008

Synthesis of Nanostructure Iron Particles in Spherical Morphology via Ultrasonic Spray

Ebin B., GÜRMEN S.
14. International Metallurgical and Materials Congress, 16 - 18 Ekim 2008

Aerosol Synthesis of Nanosized Copper and Copper Oxide Powder by Ultrasonic Spray Pyrolysis

Gencer Ö., Ebin B., GÜRMEN S., ÖZKAL B.
NanoTR-IV (Nano Science and Nano Technology), İstanbul, Türkiye, 9 - 13 Haziran 2008

Preparation of Silver Nanoparticles from Ultrasonic Spray Pyrolysis of Aqueous Silver Nitrate Solution

Yazıcı E., Ebin B., Gürmen S., Arslan C., Özkal B.
4th NanoScience and Nanotechnology Conference, İstanbul, Türkiye, 9 - 13 Haziran 2008

Synthesis of Porous Submicronic Iron/Iron Oxide Spherical Powders formed by Nanoparticles Cluster via Ultrasonic Spray Pyrolysis

Ebin B., Gürmen S., Arslan C.
4th Nanoscience and Nanotechnology Conference, İstanbul, Türkiye, 9 - 13 Haziran 2008

Effect of Mechanical Alloying on the Sintering Behavior of WC-Co Hardmetal System

Pestreli D., Ebin B., ÖZKAL B., GÜRMEN S.
International Conference on Tungsten, Refractory Hardmaterials VII, 8 - 12 Haziran 2008

Preparation of Nanostructured Iron Particles via Ultrasonic Spray Pyrolysis and Hydrogen Reduction

Ebin B., GÜRMEN S., ÖZKAL B., Pesterli D.
World Congress on Powder Metallurgy and Particulate Materials, 8 - 12 Haziran 2008

Preparation and characterization of magnetic cobalt nanoparticles synthesized by ultrasonic spray pyrolysis of cobalt chloride precursor

Ebin B., GÜRMEN S., Kamer O.
Euromat 2007, 10 - 13 Eylül 2007

Synthesis of Nanosized Nickel powder by USP

Ebin B., GÜRMEN S.
NanoTR-III (Nano Science and Nano Technology), Ankara, Türkiye, 11 - 14 Haziran 2007

Effect of Different Anode Materials on Electrolysis of Chromium from Synthetic Chrome-alum Solution

Onuk A. G., Gürmen S., Arslan C.
European Metallurgical Conference 2007, Düsseldorf, Almanya, 11 - 14 Haziran 2007

Effect of different anode materials on electrolysis of Cr from synthetic Cr-alum solution

Onuk G., GÜRMEN S., ARSLAN C.
European Metallurgical Conference 2007, 11 - 14 Haziran 2007

Effect of Catholyte Flowrate on Current Efficiency of Electrolytic Chromium Production from Synthetic Cr-alum Solutions

Onuk A. G., Gürmen S., Arslan C.
13th International Metallurgical and Materials Congress, İstanbul, Türkiye, 9 - 11 Kasım 2006

Sentetik Cr-Alum Çözeltisinden Elektrolitik Krom Üretiminde Anolit-Katolit Seviyesinin Akım Verimine Etkisi

GÜRMEN S., ARSLAN C.
13. Uluslararası Metalurji ve Malzeme Kongresi, 9 - 11 Ekim 2006

Preparation and characterization of cobalt and silver nanoparticles synthesized by ultrasonic spray pyrolysis

GÜRMEN S., Stopic S., Friedrich B.
Protein-based MaterialsSystems for Science Technology, 20 - 23 Haziran 2006

Synthesis of Fe, Co and Ni powders via ultrasonic spray pyrolysis and hydrogen reduction method

GÜRMEN S., Stopic S., Freidrich B.
SAXS: Nanoyapılar İçeren Malzemeler İçin Güçlü Bir Yöntem Çalıştayı, Ankara, Türkiye, 22 - 23 Kasım 2005

Elektrik Ark Fırını (EAF) Baca Tozlarının Hidrometalurjik Değerlendirilmesi

Orhan G., Gürmen S., Güven A., Arslan C.
12th International Metallurgical and Materials Congress, İstanbul, Türkiye, 28 Eylül - 02 Ekim 2005

EAF Baca Tozlarının Hidrometalurjik Değerlendirilmesi

ORHAN G., GÜRMEN S., ARSLAN C.
12. Uluslararası Metalurji ve Malzeme Kongresi, 28 Eylül - 02 Ekim 2005

İleri Teknoloji Malzemelerinin Üretimine Yönelik Nano Boyutlu Kobalt Tozu Üretimi

GÜRMEN S., Stopic S., Friedrich B.
12. Uluslararası Metalurji ve Malzeme Kongresi, 28 Eylül - 02 Ekim 2005

Recovery of submicron cobalt-powder by acidic leaching of cemented carbide scrap

GÜRMEN S., Stopic S., Friedrich B.
European Metallurgical Conference 2005, Dresden, Almanya, 18 - 21 Eylül 2005

Synthesis of particles of Ni-and Co-powders by ultrasonic spray of NiCl2 and Co(NO3)2 and hydrogen reduction pyrolysis

Stopic S., Friedrich B., GÜRMEN S.
European Metallurgical Conference 2005, Dresden, Almanya, 18 - 21 Eylül 2005

Production of nano-sized cobalt powder via ultrasonic spray pyrolysis (USP) hydrogen reduction method and chracterization

GÜRMEN S., ÖZKAL B.
NanoTR-1, Nano Science and Nano Technology, Ankara, Türkiye, 25 - 27 Mayıs 2005

Production of nanoporous carbon coated Particule based composite powders via polymer pyrolysis method

ÖZKAL B., GÜRMEN S.
NanoTR-1 (Nano Science and Nano Technology, Ankara, Türkiye, 25 - 27 Mayıs 2005

Atık Çözeltilerden Metal Geri Kazanımında Özel Elektroliz Hücreleri ve Uygulamalar

ORHAN G., GÜRMEN S., TİMUR S. İ.
İTÜ 9. Endüstriyel Kirlenme Kontrolü Sempozyumu, İstanbul, Türkiye, 2 - 04 Haziran 2004

De-metallization of Copper-containing Industrial Wastewaters by various Electrolysis Systems

Orhan G., Gürmen S., Arslan C.
European Metallurgy Congress, Hannover, Almanya, 16 - 19 Eylül 2003

Slag Systems in Copper Recycling from Cu-Mg Scraps

GÜRMEN S., Friedrich B., DUMAN İ.
European Metallurgical Conference 2003, Hannover, Almanya, 16 - 19 Eylül 2003

Türkiye’de Üretilen Altın Alaşımlarının CIELAB Sistemine Göre Renk Özellikleri

GÜRMEN S., TİMUR S. İ., DUMAN İ.
11. Uluslararası Metalurji ve Malzeme Kongresi, 5 - 08 Haziran 2002

Yıkama Sularından Elektrolitik Bakır Kazanımında pH değerinin Etkisi

Orhan G., Arslan C., Gürmen S., Timur S. İ.
11th International Metallurgical and Materials Congress, İstanbul, Türkiye, 5 - 08 Haziran 2002

Plazma Sprey Kaplamaya Uygun Biyo-Cam Üretimi

GÖLLER G., GÜRMEN S., Demirkesen E.
11. Uluslararası Metalurji ve Malzeme Kongresi, 5 - 08 Haziran 2002

Alüminyum ve Endüstriyel Kirlenme

ÜNLÜ N., GÜRMEN S., TİMUR S. İ.
2000 GAP ÇEVRE KONGRESİ, URFA, Türkiye, 16 - 18 Ekim 2000, cilt.2, ss.1143-1148

Beneficiation of Brass Ashes

Timur S. İ., Gürmen S., Orhan G., Arslan C., Duman İ.
XXI International Mineral Processing Congress IMPC 2000, Roma, İtalya, 23 - 27 Temmuz 2000

Paslanmaz Çelik Katot Üzerinde Toplanan Bakıra Yüzey Aktifleştiricilerin Etkisi

TİMUR S. İ., GÜRMEN S., DUMAN İ.
9. Uluslararası Metalurji ve Malzeme Kongresi, 11 - 15 Haziran 1997

Kurşun Anotların Elektrokimyasal ve Mekanik Özelliklerine Alaşım Elementlerinin Etkisi

Timur S. İ., Gürmen S., Arslan C., Duman İ.
9th International Metallurgical and Materials Congress, İstanbul, Türkiye, 11 - 15 Haziran 1997

Metal İyonlarının Kurşun Bazlı Anotlar Üzerindeki Oksijen Fazla Voltajına Etkisi

TİMUR S. İ., GÜRMEN S., DUMAN İ.
9. Uluslararası Metalurji ve Malzeme Kongresi, 11 - 15 Haziran 1997

Soy Metal Alaşımlarının Elektrolitik Ayrımı

GÜRMEN S., TİMUR S. İ., DUMAN İ.
9. Uluslararası Metalurji ve Malzeme Kongresi, 11 - 15 Haziran 1997

Thomas Rafinasyon Fırınlarında Alümina Esaslı Refrakterlerin Curuf Etkileşimi

GÜRMEN S., ÖZGEN Ö. S., DUMAN İ.
8. Uluslararası Metalurji ve Malzeme Kongresi, 6 - 09 Haziran 1995

Alüminyum un Yeniden Değerlendirilmesi

ÜNLÜ N., GÜRMEN S., ALTMIŞOĞLU A., ERUSLU M. N.
1. Alüminyum Sempozyumu, Konya, Türkiye, 25 - 26 Kasım 1994, ss.1-11

Bakır Rafinasyon Fırınlarında Curuf Bileşiminin Refrakter Korozyonuna Etkisi

ÖZGEN Ö. S., DUMAN İ., GÜRMEN S.
Uluslararası Seramik Kongresi, 19 - 23 Ekim 1992

Kitap & Kitap Bölümleri

Nanotechnology: Synthesis and characterization of Nanocrystalline Nickel/Zinc Oxide Particles By Ultrasonic Spray Pyrolysis

Koç İ., Ebin B., GÜRMEN S.
Processing and Properties of Advanced Ceramics and Composites V: Ceramic Transactions, Bansal, N.P., Singh, J.P., Ko, S., Csatro, R., Pickrell, G., Manjooran, N.J., Nair, M. ve Singh, G., Editör, John Wiley and Sons Inc., ss.239-246, 2013

Nanotechnology: Iron–Nickel-Cobalt (Fe–Ni-Co) Alloy Particles Prepared by Ultrasonic Spray Pyrolysis and Hydrogen Reduction (USP-HR) Method

Toparlı Ç., Ebin B., GÜRMEN S.
Processing and Properties of Advanced Ceramics and Composites V: Ceramic Transactions, Bansal, N. P., Singh, J. P., Ko, S., Castro, R., Pickrell, G., Manjooran, N. J., Nair, M. ve Singh, G., Editör, John Wiley and Sons Inc., ss.247-255, 2013

Metrikler

Yayın

223

Atıf (WoS)

431

H-İndeks (WoS)

12

Atıf (Scopus)

843

H-İndeks (Scopus)

16

Proje

30

Tez Danışmanlığı

2

Açık Erişim

4
BM Sürdürülebilir Kalkınma Amaçları