Prof.Dr. Hasan Ergin


Maden, Maden Mühendisliği


Araştırma Alanları: Maden Mühendisliği ve Teknolojisi, Mühendislik ve Teknoloji


Yayınlardaki İsimler: Ergin, Hasan

E-posta: hergin@itu.edu.tr
Ofis: Maden Fakültesi, Maden Mühendisliği Bölümü C-307
Posta Adresi: İTÜ Maslak Kampüsü Maden Fakültesi Maden Mühendisliği Bölümü 34469 Maslak-İstanbul

Metrikler

Yayın

66

Atıf (WoS)

145

H-İndeks (WoS)

4

Atıf (Scopus)

220

H-İndeks (Scopus)

6

Proje

8

Tez Danışmanlığı

2

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları

Eğitim Bilgileri

1989 - 1994

1989 - 1994

Doktora

The University of Leeds, Maden Ve Cevher Hazırlama Mühendisliği, İngiltere

1982 - 1986

1982 - 1986

Lisans

İstanbul Teknik Üniversitesi, Maden Fakültesi, Maden Mühendisliği Bölümü, Türkiye

Yabancı Diller

İngilizce

Araştırma Alanları

Maden Mühendisliği ve Teknolojisi

Mühendislik ve Teknoloji

Akademik Unvanlar / Görevler

2006 - Devam Ediyor

2006 - Devam Ediyor

Prof.Dr.

İstanbul Teknik Üniversitesi, Maden Mühendisliği Bölümü

2000 - 2006

2000 - 2006

Doç.Dr.

İstanbul Teknik Üniversitesi, Maden Fakültesi, Maden Mühendisliği Bölümü

1994 - 2000

1994 - 2000

Yrd.Doç.Dr.

İstanbul Teknik Üniversitesi, Maden Fakültesi, Maden Mühendisliği Bölümü

Yönetimsel Görevler

1999 - 2001

1999 - 2001

Enstitü Müdür Yardımcısı

İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü

Akademi Dışı Deneyim

1986 - 1989

1986 - 1989

Maden Mühendisi

Maden Tetkik Arama Enstitüsü

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

2009

2009

Karıştırmalı bilyalı değirmenler

ERGİN H.

Boyatürk Dergisi , ss.90-96, 2009 (Hakemsiz Dergi)

2004

2004

Energieverbrauch in der türkei

KUZU C., ERGİN H.

TU international , sa.55, ss.25-27, 2004 (Hakemsiz Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

2022

2022

Investigation of the Recycling of Ceramic Sludge Waste for Wall Tile Production in Ceramic Factory

Ergin H.

17 th International Mineral Processing Congress, İstanbul, Türkiye, 15 - 17 Aralık 2022, ss.905-912

2022

2022

Technological and Economical Investigation of Glaze Preparation Using Dry Stirred Media Mill

Ergin H.

17 th International Mineral Processing Symposium, İstanbul, Türkiye, 15 - 17 Aralık 2022, ss.117-122

2022

2022

A NOVEL DRY GRANULE PREPARATION TECHNOLOGY AND COMPARISON OF GRANULE PROPERTIES WITH CONVENTIONAL WET SYSTEM FOR CERAMIC TILES PRODUCTION

Ergin H.

17 th International Mineral Processing Symposium, İstanbul, Türkiye, 15 - 17 Aralık 2022, ss.89-96

2022

2022

Reduced Drilling costs through optimum tricone bit selection - Using a Horizontal Drill Rig (HDR)

Ergin H.

V. International Drilling Congress and Exhibition, İzmir, Türkiye, 27 - 28 Ekim 2022, ss.1-8

2017

2017

Investigation Of The Effects Of Clay Impurities On Ceramic Tiles And Novel Methods For Improvements

Yıldırım Y., Durgut E., Ergin H.

XVII. Balkan Mineral Processing Congress, İzmir, Türkiye, 1 - 03 Kasım 2017

2017

2017

Optimum Use Of Fired Ceramic Tile Waste In The Production Of Blended Cement

TOKER M., ERGİN H., aykaç u.

XVII. Balkan Mineral Processing Congress, 1 - 03 Kasım 2017

2016

2016

New Generation Rotary Drill Bits: Klaw Bit Performance Analysis and Compared with Tricone Bit

Ergener B., Akkriş D., C. L., Acaroğlu Ergün Ö., Ergin H., Toker Derdiyok M.

Proceedings of the 2nd World Congress on Mechanical, Chemical and Material Engineering, Budapeşte, Macaristan, 22 - 23 Ağustos 2016, ss.112

2014

2014

Effects of grinding media shape in milling of ceramic raw materials

Kayacı K., Yıldırım Y., Altıntaş A., Kılıç M., Durgut E., Yiğit Pala Ç., et al.

XIV. International Mineral Processing Symposium & Exhibition, 15 - 17 Ekim 2014

2014

2014

Investigation of the use of sanitary ware plaster mold wastes in the production save roller engobe

Eker A., Seyhan N., Başoğlu D., Kayacı K., Taycu A., Gula M., et al.

III. International ceramic glass porcelain enamel glaze and pigment congress, 15 - 17 Ekim 2014

2014

2014

Optimum use of floor tile waste in the production of blended cement

TOKER M., ERGİN H., Kayacı K.

XIV. International Mineral Processing Symposium & Exhibition, 15 - 17 Ekim 2014

2014

2014

New developments on ceramic raw material preparation and granules production

ERGİN H.

III. International ceramic glass-porcelain enamel glaze and pigment congress, 15 - 17 Ekim 2014

2014

2014

Optimum use of zeolite in the production of blended cement

TOKER M., ERGİN H.

XIV. International Mineral Processing Symposium & Exhibition, 15 - 17 Ekim 2014

2013

2013

Penetration properties of innovative ultra fine cements for tunnel construction

ERGİN H., Tekkeşin H., Çimen S.

3. Uluslararası ulaşımda yeraltı kazıları sempozyumu, 29 - 30 Kasım 2013

2011

2011

A new method to optimise the rotary drill bit selection and operation

ERGİN H., Eskikaya Ş., Kelessidis V.

22th world mining congress&expo, 11 - 16 Eylül 2011, cilt.3, ss.793-799

2011

2011

Analysis and optimization of drilling operating parameters in coring and drilling operations

ERGİN H., Kelessidis V.

22th world mining congress&expo, 11 - 16 Eylül 2011, cilt.2, ss.209-216

2011

2011

The properties of an innovative ultra fine cements produced in Turkey

ERGİN H., Eskikaya Ş.

22th world mining congress&expo, 11 - 16 Eylül 2011

2010

2010

Drilling fluid advances for core drilling

Vassilios K., ERGİN H.

VI. delme patlatma sempozyumu, Türkiye, 4 - 05 Kasım 2010

2006

2006

Çimento hammadde öğütme sistemlerinin optimum seçimi ve işletilmesi

ERGİN H., Özdemircan D.

4. Ulusal kırmataş sempozyumu, Türkiye, 1 - 02 Aralık 2006, ss.235-243

2006

2006

The critical comparison industrial cement grinding circuit flowsheets

ERGİN H., Gür O.

XXIII: International mineral processing congress, 3 - 08 Eylül 2006, cilt.3, ss.1995-2000

2005

2005

Proper Selection of Roadheaders

ESKIKAYA S., ACAROĞLU ERGÜN Ö., ERGIN H.

20th World Mining Congress, TAHRAN, 7 - 11 Kasım 2005, ss.621-627

2005

2005

Bomlu kazı makinalarının seçiminde kullanılabilecek teknik parametreler

ACAROĞLU ERGÜN Ö., ERGİN H., Eskikaya Ş.

2. İş makanaları sempozyumu, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2005, ss.11-26

2005

2005

Bomlu kazı makinalarının stabilite analizi ve kesici kafa geometrisinin stabiliteye etkisi

ACAROĞLU ERGÜN Ö., ERGİN H.

19th Mining Congress of Turkey, İzmir, Türkiye, 9 - 12 Haziran 2005, ss.151-161

2003

2003

Çimento hammaddeleri için optimum kırıcı seçimi ve işletilmesi

ERGİN H., KUZU C.

3. Ulusal Kırmataş Sempozyumu, Türkiye, 3 - 04 Aralık 2003

2003

2003

Assessment of Mechanical Excavation at Cement Raw Material Production

ERGİN H., Yonar İ., ACAROĞLU ERGÜN Ö., Çetinkaya M., Akın K.

International Symposium Industrial Minerals and Building Stones, 15 - 18 Eylül 2003, ss.151-161

2003

2003

An Assessment of the Roadheaders Stability According to Cutting Head Shapes

ACAROĞLU ERGÜN Ö., ERGİN H., Eskikaya S.

International symposium on computer application in the minerals industries, 08 Eylül 2003

1999

1999

Optimization of Cement Grinding Circuits Through Simulation

ERGİN H., ERÇELEBİ S. G.

11th European Simulation Conference’, Erlangen, Almanya, 26 - 28 Ekim 1999, ss.379-393

1995

1995

Doğrusal kaya kesme seti veri erişim sisteminin ve yazılımlarının tasarımı

YAZICI S., KUZU C., ERGİN H., BİLGİN N., ESKİKAYA Ş.

Mühendislikte 20.Yıl Sempozyumu, Zonguldak, Türkiye, 5 - 06 Ekim 1995, ss.12

Desteklenen Projeler

2016 - 2018

2016 - 2018

Comparison of Dry Grinding Technologies as a Reference of Ceramic Granule Technological Parameters

Yükseköğretim Kurumları Destekli Proje

Ergin H. (Yürütücü)

2014 - 2016

2014 - 2016

Yarıyaş Granül hazırlama sistemi geliştirilmesi

TÜBİTAK Projesi

Ergin H.

2013 - 2015

2013 - 2015

DMT Dinamik Mikronize Teknoloji Geliştirilmesi

TÜBİTAK Projesi

Ergin H.

2002 - 2004

2002 - 2004

Çok Kriterli Karar Verme Yöntemleriyle Optimum Tünel Açma Makinası Seçimi

Yükseköğretim Kurumları Destekli Proje

Ergin H. (Yürütücü)

1996 - 1998

1996 - 1998

Trakya ve İstanbul Kömürlerinin Bilgisayarla Değerlendirilerek Envanterinin Çıkarılması

Yükseköğretim Kurumları Destekli Proje

Ergin H. (Yürütücü)


Burslar

1988 - 1994

1988 - 1994

Master and PhD study in United Kingdom

Milli Eğitim Bakanlığı

1982 - 1986

1982 - 1986

Undergraduate study

Diğer Resmi Kurumlar

Atıflar

Toplam Atıf Sayısı (WOS): 145

h-indeksi (WOS): 4