SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Experimental investigation of corrosion effects on bending fatigue of the wire ropes
Indian Journal Of Engineering And Materials Sciences
, cilt.27, sa.3, ss.770-775, 2020 (SCI-Expanded)
The influence of rotation speed on the bending fatigue lifetime of steel wire ropes
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
, cilt.225, sa.C3, ss.520-525, 2011 (SCI-Expanded)
Artificial neural networks application in Duplex/Triplex elevator group control system
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
, cilt.54, sa.2, ss.103-114, 2008 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
THE SIMULATION OF SEISMIC EFFECTS ON GUIDE RAIL FASTENERS AND RE-DESIGN OF BRACKETS
ELEVCON 2023, Praha, Çek Cumhuriyeti, 20 - 22 Haziran 2023
Hidrolik Pres Tahrikli Kapalı Kalıpta Sıcak Dövme Prosesinin Modellenmesi ve Parametre Optimizasyonu
8. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, İstanbul, Türkiye, 8 - 10 Aralık 2022
Rüzgar Türbinleri için Otomatik Tırmanma Asansörü Tasarımı
X. Asansör Sempozyumu, İzmir, Türkiye, 18 - 20 Kasım 2021
Asansörler ve Yürüyen Merdivenlerde Enerji Tüketimi ve Verimliliği
IX. Asansör Sempozyumu, İzmir, Türkiye, 18 - 20 Ekim 2018, ss.127-135
Panoramik Asansör Kabini Sonlu Elemanlar Modellemesi ve Analizi
IX. Asansör Sempozyumu, İzmir, Türkiye, 18 - 20 Ekim 2018, ss.59-63
Point Fixed Laminated Glass Stress Distribution Under Out of Plane Load
The 12st Int Research/Expert Conference “Trends in the Development of Machinery and Associated Technology, Karlovy-Vary, Çek Cumhuriyeti, 18 - 22 Eylül 2018, ss.229-232
Design and Analysis of the Protective Structure of An Intercity Bus During A Rollover Accident
26 International Scientific Technical Conference, trans MOTAUTO 2018, Burgaz, Bulgaristan, 27 - 30 Haziran 2018, ss.14-17
Analytical and Finite Element In-Plane Vibration Analysis of a Gantry Crane
26 International Scientific Technical Conference, trans MOTAUTO 2018, Burgas, Bulgaristan, 27 - 30 Haziran 2018, ss.45-47
Investigation of Bending Over Sheave Fatiques Life of Stranded Steel Wire rope by Artificial Neural networks
The IRES International Conference, 17 - 18 Temmuz 2016, ss.1-3
Crtical Tensile Load of Stranded Ropes Subjected to Bending over Sheave Fatique
MECHATECH’16 Int. Mechanical Eng. & Techn. Conf, 17 - 18 Mayıs 2016, ss.51-54
Experimental Studies on Guide Rail
5th Symposium on Lift & Escalator Technologies, 23 - 24 Eylül 2015
Experimental studies on guide rail fastening system
5th Symposium on Lift & Escalator Technologies, 23 - 24 Eylül 2015
Early Application of Underground Funicular Tunnel in Istanbul
20th International Congress on Vertical Transportation Technologies ELEVON 2014, Paris, Fransa, 8 - 10 Temmuz 2014
Determination of loads acting on guide rail fixing under certain loading conditions
20th International Congress on Vertical Transportation Technologies ELEVON 2014, Paris, Fransa, 8 - 10 Temmuz 2014
Effects of 2011 Van Earthquake on the Elevators
ELEVCON 2014, 8 - 10 Temmuz 2014
Experimental Stess Anaylsis of Elevator Guiding Equipment
ADM 2013, 25 - 28 Eylül 2013
Design optimisation of elevator car for double deck system
MTM 2012, 19 - 21 Ekim 2012
Modeling and analysis of guide rail brackets and attaching parts
ELEVCON 2012, Florida, Amerika Birleşik Devletleri, 22 - 24 Mayıs 2012
Complex wire ropes models for lifts
ELEVCON 2012, 22 - 24 Mayıs 2012
The street called Asansor and water powered elevator installation in İzmir
ELEVCON 2012, Florida, Amerika Birleşik Devletleri, 22 - 24 Mayıs 2012
Numerical Model and Methodology on the analysis of complicated wire rope structures
ICCES 2012, 30 Nisan - 04 Mayıs 2012
Numerical model for an IWRC bending over sheave problem and its finite element solution
nt. Conf. on Applied, Numerical and Computational Mathematics, ICANCM’xx11, Barcelona, İspanya, 15 - 17 Eylül 2011, ss.199-205
Strain measurement of stranded rope subjected to bending over sheave fatigue
XVI International Conference on Investigation Production and Use of Steel Wire Ropes Coveyors & Hoisting Machines, 21 - 24 Eylül 2010
Advances in 3D wire rope modeling and numerical analysis
XVI. International Conference on Investigation Production & Use of Steel Wire Ropes Conveyors & Hoisting Machines, 21 - 24 Eylül 2010
Wire strand and IWRC modeling anc contact analysis using finite elements
ADM 2010, 8 - 10 Eylül 2010
Computer Modeling and Simulation of Spur Gears by Generation Methods
ADM 2010, 8 - 10 Eylül 2010
3D finite element modeling and analysis of seale independent wire rope core
MOSS 2010, 21 - 23 Temmuz 2010
Design parameters and stress analysis of elevator guide rail brackets
ELEVCON 2010, 2 - 04 Haziran 2010
Elevator installation near by the Bosphorus from Ottman Era
ELEVCON 2010, 2 - 04 Haziran 2010
Characterizing the finite element analysis of nested helical geometry and test procedure for wire ropes
ECCOMAS 2010, 16 - 21 Mayıs 2010
An application of reverse engineering in concurrent engineering
PİME 09, 24 - 27 Ağustos 2009
Computerized cutting simulation of involute helical gears generated with rack cutters
The 13th International Conference on Machine Design & Production, 3 - 05 Eylül 2008
Design and static stress analysis of elevator car suspension during operation
TMT2008, 26 - 30 Ağustos 2008
Mathematical modeling and static stress analysis of steel wire rope strand using finite element method
TMT 2008, 26 - 30 Ağustos 2008
Design for assembly and maintainability in computer aided engineering and a case study packaging
The 13th International Conference on Problems of Material Engineering Mechanics & Design, 26 - 29 Ağustos 2008
Modeling of JIB crane construction analysis with finite element method
The 13th International Conference on Problems of Material Engineering Mechanics & Design, 26 - 29 Ağustos 2008
The effect of surface roughness on the performance characterisics of radial lip seals
The 13 the International Conference on Problems of Material Engineering Mechanics & Design, 26 - 29 Ağustos 2008
Generation simulation of helical gear drivers by rack cutters having aysmmetric teeth
The 13th International Conference on Problems of Material Engineering Mechanics and Design, 26 - 29 Ağustos 2008
The Effects Of The Shaft Surface Roughness On Performance Of The Rotary Shaft Seals
The 13th International Conference on Problems of Material Engineering, Mechanics and Design, 6 - 08 Ağustos 2008, cilt.2, ss.16-20
Finite element modeling static stress analysis of axial loaded wire ropes
MOSS 2008, 23 - 25 Temmuz 2008
Finite element modeling stress analysis on guide rails during safety gear operation
MOSS 2008, 23 - 25 Temmuz 2008
Strength equations and finite element modeling of JIB crane construction
5th European Congress on Computaitonal Methods in Applied Sciences & Engineering, 30 Haziran - 05 Temmuz 2008
Modeling and Solution of the Bending Problem over the Helical Wire strand
5th European Congress on Computaitonal Methods in Applied Sciences & Engineering, 30 Haziran - 05 Temmuz 2008
Investigation of Stressess on guide rails and safety gears
ELEVCON 2008, 11 - 13 Haziran 2008
Early Version of Elevator Installation in Istanbul Hotel Pera Palace
ELEVCON 2008, 11 - 06 Haziran 2008
Analytical Study and Finite Element Analysis of Elevator Car Suspension
AMTECH 2007, 23 - 24 Kasım 2007
Computer aided design of helical gears with asymmetric involute teeth
TMT 2007, 5 - 09 Eylül 2007
Modeling and Analysis of axial loaded wire rope strand using the finite elment method
TMT 2007, 5 - 09 Eylül 2007
Finite Element approach to stress analysis for elevator car sling
TMT 2007, 5 - 09 Eylül 2007
Static stress analysis of traction chain links using the boundary element method
MOSS 2006, 28 - 29 Eylül 2006
Determination of the distribution of specific pressure between wire rope and groove
MOSS 2006, 28 - 29 Eylül 2006
Modeling and stress analysis of axial loaded wire ropes
V. International Congress Mechanical Engineering Technologies 06, 20 - 23 Eylül 2006
Static stress analysis of gantry cranes by means of finite element method
V. International Congress Mechanical Engineering Technologies 06, 20 - 23 Eylül 2006
Design for assembly methodology and its application of elevator car door design
V. International Congress Mechanical Engineering Technologies 06, 20 - 23 Eylül 2006
Static stress analysis of gantry crane by means of finite element method
V. International Congress Mechanical Engineering Technologies 06, 20 - 23 Eylül 2006
Design of elevator car doors for assembly
TMT 2006, 11 - 15 Eylül 2006
Linear and nonlinear finite element modeling and stress analysis of portal cranes
TMT 2006, 11 - 15 Eylül 2006
The modern lift control systems in multi stores building
TMT 2006, 11 - 15 Eylül 2006
Modeling and static stress analysis of elevator car frame using finite element method
The 12th International Conference on Machine Design and Production, 5 - 08 Eylül 2006
Finite Element modeling and nonlinear stress analysis of portal crane
The 12th International Conference on Machine Design and Production, 5 - 08 Eylül 2006
Reducing the average journey time in the group elevators by means of simulation
ELEVCON 2006, 20 - 22 Haziran 2006
Computer aided car frame modeling and stress analysis
ELEVCON 2006, 20 - 22 Haziran 2006
Test unit design for hydarulic elevator valves
ELEVCON 2006, 20 - 22 Haziran 2006
Experimental stress analysis of guide rails
ELEVCON 2006, 20 - 22 Haziran 2006
Finite element modeling and static stress analysis of crosshead
AED 2006, 11 - 14 Haziran 2006
Static stress analysis of lifting hooks as a curved beam
AED 2006, 11 - 14 Haziran 2006
Finite element modeling and static stress analysis of guide rails
trans & MOTAUTO 05, 23 - 25 Kasım 2005
Computer Aided Geometric Design of Hooks using B Spline Synthetic Curves
trans & MOTATUTO 05, 23 - 25 Kasım 2005
Genetic algorithms embedded elevator traffic control system
Trans & MOTATUTO 05, 23 - 25 Kasım 2005
Finite element modeling of escalator truss for static stress analysis
AMTECH 2005, 9 - 11 Kasım 2005
Finite element modeling of spur gears for contact and bending stresses
AMTECH 2005, 9 - 11 Kasım 2005
Design and static stress analysis of hook crosspiece by means of finite element method
AMTECH 2005, 9 - 11 Kasım 2005
Kabin Çerçevelerinin Sonlu Elemanlarla Modellenmesi ve Startik Gerilme Analizi
7th International Fracture Conference, 19 - 21 Ekim 2005
Comparison of boundary element and finite element methods in chain link stress analysis
ATS 2005, 28 - 30 Eylül 2005
Finite element modeling of spur gears for contact stresses during the whole meshing cycle
TMT 2005, 26 - 30 Eylül 2005
Finite element modeling and static stress analysis of crane box girder
ATS 2005, 28 - 30 Eylül 2005
The simulation and optimization of lift control systems with genetic algorithms
TMT2005, 26 - 30 Eylül 2005
Exact analysis of stresses in a crane hook
TMT 2005, 26 - 30 Eylül 2005
Stress analysis of roller chain links of transport systems by boundary element method
ELEVCON 2004, 27 Nisan 2004 - 29 Eylül 2005
Shape optimization of hollowed roller chains by means of elasto static stress analysis
ELEVCON 2005, 7 - 09 Haziran 2005
Finite element analysis of elevator guide rails during safety gear operation
ELEVCON 2005, 7 - 09 Haziran 2005
The model generation and optimization of escalator truss structure for the finite element analysis
11. International Conference on Machine Design & Production, 13 - 15 Ekim 2004
Boundary Element and finite element stress analysis of the chain links
11. International conference on machine design and production, 13 - 15 Ekim 2004
The critical velocities of the free transverse vibratios of moving conveyor belts
VI.International Congress Mechanical Engineering Technologies 04, 23 - 25 Eylül 2004
Two dimensional modeling and stress analysis of engineering structures for boundary element analysis
VI.International Congress Mechanical Engineering Technologies 04, 23 - 25 Eylül 2004
Solid modeling and finite element analysis of overhead crane bridge
AED 2004, 5 - 08 Eylül 2004
Boundary element modeling and static analysis of chain links
AED 2004, 5 - 08 Eylül 2004
Condition monitoring of lift gear boxes by means of sound analysis
ESDA 2004, 19 - 22 Temmuz 2004
The finite element modeling of spur gears for pseudodynamic stress analysis
1st Cappadocia International Mechanical Engineering Symposium, 14 - 16 Temmuz 2004
Countermeasures for elevators in the seismic risk zone of Istanbul
ELEVCON 2004, 27 - 29 Nisan 2004
The modeling and simulation of elevator group control systems for public service buildings
DECOM-TT 2003, 26 - 28 Haziran 2003
Determination of th next stopping floor in elevator traffic control by means of neural networks
3rd Triennial International Conference on Applied Automatic Systems, 18 - 20 Haziran 2003
Calculating the pressure distribution in undercut groove stress function solution
ELEVCON 2002, 25 - 27 Haziran 2002
Funiculat systems and an early application in Istanbul
ELEVCON 2002, 25 - 27 Haziran 2002
Determination of the shape factors for u grooves by applying the airy stress function
Mediterrameamtrib 2002, 12 - 14 Haziran 2002
Bilgisayar Destekli Basit Kanca Gerilme Analizi
9. Uluslararası Makina Tasarım ve İmalat Kongresi, 13 - 15 Eylül 2000
Preventive maintenance in elevator installations
ELEVCON 2000, 9 - 11 Mayıs 2000
Structures and selection of wire ropes in elevators
ELEVCON 2000, 9 - 11 Mayıs 2000
Asansör Trafik Kontrolüne Yapay Sinir Ağları Uygulaması
4. Uluslararası Mekatronik Tasarım ve Modelleme Çalışma Toplantısı, 1 - 03 Eylül 1999
Application of Neural Networks on Traffic Control
ELEVCON 1998, 5 - 07 Ekim 1998
Asansör kontrol sistemleri ve trafik analizi
7.Uluslararası Makina Tasarımı ve İmalat Kongresi, 11 - 13 Eylül 1996
Kaynaklı İmalatta Kaynak Parametrelerinin WPS Bilgisayar Yardımıyla Tayini
6.Uluslararası Makina Tasarımı ve İmalat Kongresi, 21 - 23 Eylül 1994
Eğri Eksenli Çubuk Olarak Kancaların Bilgisayar Yardımıyla Tasarımı
6.Uluslararası Makina Tasarımı ve İmalat Kongresi, 21 - 23 Eylül 1994
Bilgisayar Yardımıyla Köprülü Kren Tasarımı
6.Uluslararası Makina Tasarımı ve İmalat Kongresi, 21 - 23 Eylül 1994