Doç.Dr. Levent Ali Kavurmacıoğlu

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Aerothermal Optimization of Film Cooling Hole Locations on the Squealer Tip of an HP Turbine Blade

Yıldız F., ALPMAN E., Kavurmacıoğlu L. A., Camci C.

Journal of Thermal Science and Engineering Applications , cilt.16, sa.5, 2024 (SCI-Expanded)

Influence of Inlet Vane and Wrap Angles on Cavitation Behavior of a Centrifugal Pump

Dönmez A., Yumurtacı Z., Kavurmacıoğlu L. A.

Journal of Applied Fluid Mechanics , cilt.16, sa.3, ss.519-531, 2023 (SCI-Expanded)

Flow characteristics comparison of PIV and numerical prediction results for an unmanned underwater vehicle positioned close to the free surface

Kilavuz A., Ozgoren M., Kavurmacioglu L. A., Durhasan T., Sarigiguzel F., Sahin B., et al.

APPLIED OCEAN RESEARCH , cilt.129, 2022 (SCI-Expanded)

An Optimization-Based Design Strategy for Centrifugal Compressors of Automotive Turbochargers and the Comparison of Five Particular Optimization Methods

Alpaya M., Kavurmacıoğlu L. A., Camci C.

Journal of Fluids Engineering, Transactions of the ASME , cilt.144, sa.10, 2022 (SCI-Expanded)

Influence of free-surface on wake flow characteristics of a torpedo-like geometry

Kilavuz A., Durhasan T., Ozgoren M., Sarigiguzel F., Sahin B., Kavurmacioglu L. A., et al.

JOURNAL OF MARINE SCIENCE AND TECHNOLOGY , cilt.27, sa.3, ss.1130-1147, 2022 (SCI-Expanded)

Experimental investigation of free-surface effects on flow characteristics of a torpedo-like geometry having a cambered nose

Sarigiguzel F., Kilavuz A., Ozgoren M., Durhasan T., Sahin B., Kavurmacioglu L. A., et al.

OCEAN ENGINEERING , cilt.253, 2022 (SCI-Expanded)

The impacts of the free-surface and angle of attack on the flow structures around a torpedo-like geometry

Kilavuz A., Sarigiguzel F., Ozgoren M., Durhasan T., ŞAHİN B., Kavurmacıoğlu L. A., et al.

European Journal of Mechanics, B/Fluids , cilt.92, ss.226-243, 2022 (SCI-Expanded)

Numerical analysis of secondary flow loss reduction in axial turbine blades using a combined endwall fence and casing groove method

Yildirim E., Kavurmacioglu L. A.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.38, sa.1, ss.357-369, 2022 (SCI-Expanded)

A Genetic Algorithm Based Multi-Objective Optimization of Squealer Tip Geometry in Axial Flow Turbines: A Constant Tip Gap Approach

Maral H., Senel C. B., Deveci K., ALPMAN E., Kavurmacıoğlu L. A., Camci C.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.142, sa.2, 2020 (SCI-Expanded)

A genetic algorithm based aerothermal optimization of tip carving for an axial turbine blade

Maral H., Alpman E., Kavurmacıoğlu L. A., Camci C.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.143, 2019 (SCI-Expanded)

The Effect of Inlet Blade Angle Variation on Cavitation Performance of a Centrifugal Pump: A Parametric Study

Donmez A. H., YUMURTACI Z., Kavurmacioglu L. A.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.141, sa.2, 2019 (SCI-Expanded)

Casing grooves to improve aerodynamic performance of a HP turbine blade

Kavurmacıoğlu L. A., Senel C. B., Maral H., CAMCI C.

AEROSPACE SCIENCE AND TECHNOLOGY , cilt.76, ss.194-203, 2018 (SCI-Expanded)

An aerothermal study of the influence of squealer width and height near a HP turbine blade

SENEL C. B., MARAL H., Kavurmacıoğlu L. A., CAMCI C.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.120, ss.18-32, 2018 (SCI-Expanded)

Performance of Partial and Cavity Type Squealer Tip of a HP Turbine Blade in a Linear Cascade

Kavurmacioglu L. A., Maral H., Senel C. B., CAMCI C.

INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING , cilt.2018, 2018 (SCI-Expanded)

NUMERICAL INVESTIGATION OF LEAKAGE FLOW IN AXIAL FLOW TURBINES: EFFECT OF TIP CLEARANCE AND RELATIVE MOTION

Maral H., Senel C. B., Kavurmacıoğlu L. A.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.37, sa.1, ss.79-92, 2017 (SCI-Expanded)

Experimental heat transfer due to oscillating water flow in open-cell metal foam

Bagci O., Dukhan N., Özdemir M., KAVURMACIOGLU L. A.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.101, ss.48-58, 2016 (SCI-Expanded)

Effect of frequency on heat transfer due to oscillating water flow in open-cell metal foam: An experimental study

Dukhan N., BAGCI O., Kavurmacıoğlu L. A.

EXPERIMENTAL THERMAL AND FLUID SCIENCE , cilt.66, ss.97-105, 2015 (SCI-Expanded)

Forced-Convection Measurements in the Fully Developed and Exit Regions of Open-Cell Metal Foam

Bagci O., Dukhan N., Kavurmacıoğlu L. A.

TRANSPORT IN POROUS MEDIA , cilt.109, sa.2, ss.513-526, 2015 (SCI-Expanded)

End-to-Side Anastomosis With "Open-Y" Technique on Small Vessels to Increase Patency and Facilitate Anastomosis

AKAN M., ÇAKIR B., Gideroglu K., AKÖZ T., Kavurmacioglu L. A.

JOURNAL OF CRANIOFACIAL SURGERY , cilt.20, sa.6, ss.2226-2229, 2009 (SCI-Expanded)

Aerodynamic character of partial squealer tip arrangements in an axial flow turbine. Part II: Detailed numerical aerodynamic field visualisations via three dimensional viscous flow simulations around a partial squealer tip

Kavurmacioglu L. A., DEY D., CAMD C.

PROGRESS IN COMPUTATIONAL FLUID DYNAMICS , cilt.7, sa.7, ss.374-386, 2007 (SCI-Expanded)

Aerodynamic character of partial squealer tip arrangements in an axial flow turbine. Part 1: Detailed aerodynamic field modifications via three dimensional viscous flow simulations around baseline tip

Kavurmacioglu L. A., DEY D., CAMCI C.

PROGRESS IN COMPUTATIONAL FLUID DYNAMICS , cilt.7, sa.7, ss.363-373, 2007 (SCI-Expanded)

Aerodynamics of tip leakage flows near partial squealer rims in an axial flow turbine stage

Camci C., DEY D., Kavurmacioglu L. A.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME , cilt.127, sa.1, ss.14-24, 2005 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

POD Analysis of Flow around Torpedo-Like Geometry with a Hemispherical Nose

Ömer K., Yanıktepe B., Özgören M., Şekeroğlu E., Ezgi A., Durhasan T., et al.

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.6, ss.555-566, 2023 (Hakemli Dergi)

Sonic Boom Prediction Code Development and Sonic Boom Predictions via Open-Source CFD Software

ALPMAN E., KAVURMACIOĞLU L. A., EKEN S., İNCİ H., ÇAMUR Z., Biçer B.

Havacılık ve Uzay Teknolojileri Dergisi , cilt.15, sa.2, 2022 (Hakemli Dergi)

Analysis of Attack Angle Effect on Flow Characteristics Around Torpedo-Like Geometry Placed Near the Free-Surface via CFD

Kavurmacıoğlu L. A., Özgören M., Durhasan T., Şahin B., Kılavuz A.

Politeknik Dergisi , cilt.24, sa.4, ss.1579-1592, 2021 (ESCI)

AEROTHERMAL OPTIMIZATION OF SQUEALER GEOMETRY IN AXIAL FLOW TURBINES USING GENETIC ALGORITHM

Deveci K., MARAL H., SENEL C. B., Alpman E., Kavurmacıoğlu L. A., CAMCI C.

JOURNAL OF THERMAL ENGINEERING , cilt.4, sa.3, ss.1896-1911, 2018 (ESCI)

Experimental investigation of flow structures around a torpedo-like geometry placed in a boundary layer flow

Hayder M., Goktepeli I., Yagmur S., Ozgoren M., Kose F., Kavurmacıoğlu L. A.

Universal Journal of Mechanical Engineering , cilt.6, sa.1, ss.1-8, 2018 (Scopus)

SECONDARY FLOW LOSS REDUCTION IN AXIAL TURBINE BLADES BY ENDWALL FENCE APPLICATION

YILDIRIM E., KAVURMACIOĞLU L. A.

Havacılık ve Uzay Teknolojileri Dergisi , cilt.10, ss.17-30, 2017 (Hakemli Dergi)

EXPERIMENTAL FULLY DEVELOPED THERMAL CONVECTION FOR NON DARCY WATER FLOW INMETAL FOAM

Dukhan N., BAĞCI Ö., ÖZDEMİR M., KAVURMACIOĞLU L. A.

JOURNAL OF THERMAL ENGINEERING , cilt.2, ss.677-682, 2016 (Scopus)

Gölgeleme elemanlarının rüzgar üstü bina yüzeyindekibasınç katsayılarına etkileri

Ok V., ÇAKAN M., ÖZGÜNLER M., KAVURMACIOĞLU L. A.

İTÜ Dergisi / D , cilt.8, ss.28-40, 2009 (Hakemli Dergi)

Non Dimensional Mathematical Model for Pumping Systems in transition with and without Air Chamber

Özgür C., KAVURMACIOĞLU L. A.

Bulletin of Technical University of Istanbul , cilt.45, ss.319-347, 1992 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

FLUTTER ANALYSIS AT TRANSONIC SPEEDS USING A COUPLED CFD-CSD SOLVER

ALPMAN E., KAVURMACIOĞLU L. A., EKEN S.

10th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, 18 - 20 Eylül 2019

Aerodynamic Performance of a Small Scale Vertical Axis Wind Turbine Under Unsteady Wind Conditions

ALPMAN E., KAVURMACIOĞLU L. A.

22nd Thermal Science and Technology Congress, 11 - 14 Eylül 2019

Analysis of attack angle effect on flow characteristicsaround torpedo-like geometry placed near the freesurface via CFD

KILAVUZ A., ÖZGÖREN M., DURHASAN T., ŞAHİN B., KAVURMACIOĞLU L. A., AKILLI H.

22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019, cilt.2, ss.718-726

Large Eddy Simulation of a Ducted Wind Turbine for Aeroacoustic Predictions

ALPMAN E., KAVURMACIOĞLU L. A.

10th Ankara International Aerospace Conference, 18 - 20 Eylül 2019

Deniz Pervanesi Kavitasyon Gürültüsünün Hesaplamalı Akışkanlar Dinamiği ile İncelenmesi

ALPMAN E., KAVURMACIOĞLU L. A.

14. Ulusal Tesisat Mühendisliği Kongresi, Türkiye, 16 - 20 Nisan 2019

A DEPLOYMENT OF FILM COOLING HOLES ON A SQUEALER TURBINE BLADE TIP

Yıldız F., ALPMAN E., KAVURMACIOĞLU L. A.

International Symposium on Aircraft Technology, MRO Operations, 25 - 28 Kasım 2018

IMPROVED DELAYED DETACHED EDDY SIMULATION OF DEEP CAVITIES AT SUBSONIC FLOW CONDITIONS

Tüzüner B., ALPMAN E., KAVURMACIOĞLU L. A.

1st International Conference on Advances in Mechanical and Mechatronics Engineering, 8 - 09 Kasım 2018

THE EFFECT OF PLACING VORTEX GENERATORS ONTHE SELF-STARTING PERFORMANCE OF DARRIEUS TYPEVERTICAL AXIS WIND TURBINE

Ghassembaglou N., ALPMAN E., KAVURMACIOĞLU L. A.

Second International Congress on Multidisciplinary Studies, 4 - 05 Mayıs 2018

Numerical Simulation of A Cavitating Centrifugal Pump

DÖNMEZ A. H., YUMURTACI Z., KAVURMACIOĞLU L. A.

International Symposium on Innovative Approaches in Scientific Studies, 11 - 13 Nisan 2018

AN INVESTIGATION OF GROOVE TYPE CASING TREATMENT ON AERODYNAMIC PERFORMANCE OF a LINEAR TURBINE CASCADE

ŞENEL C. B., MARAL H., KAVURMACIOĞLU L. A., Camcı C.

12th European Conference on Turbomachinery Fluid dynamics Thermodynamics, Stockholm, İsveç, 3 - 07 Nisan 2017

Experimental and Numerical Investigation of Flow Characteristics of a Torpedo Like Geometry

GÖKTEPELİ İ., YAĞMUR S., ÖZGÖREN M., KÖSE F., KAVURMACIOĞLU L. A.

8th International Ege Energy Syposium, Afyonkarahisar, Türkiye, 11 - 13 Mayıs 2016, ss.606-611

Experimental investigation of attack angle effect on a torpedo like geometry via PIV

YAĞMUR S., GÖKTEPELİ İ., ÖZGÖREN M., KÖSE F., KAVURMACIOĞLU L. A.

8th International Ege Energy Syposium, Afyonkarahisar, Türkiye, 11 - 13 Mayıs 2016, ss.601-605

Aerothermal Optimization of Squealer Geometry in an Axial Flow Turbine Using Genetic Algorithm

MARAL H., ŞENEL C. B., ALPMAN E., DEVECİ K., KAVURMACIOĞLU L. A.

1st International Conference On Advances In Science, Istanbul, 31 Ağustos - 02 Eylül 2016

A PARAMETRIC AND COMPUTATIONAL AEROTHERMAL INVESTIGATION OF SQUEALER TIP GEOMETRY IN AN AXIAL TURBINE: A Parametric Approach Suitable for Future Advanced Tip Carving Optimizations

Maral H., Senel C. B., Kavurmacioglu L. A.

ASME Turbo Expo: Turbine Technical Conference and Exposition, Seoul, Güney Kore, 13 - 17 Haziran 2016

Aerothermal Performance of Partial and Cavity Squealer Tip in a Linear Turbine Cascade

MARAL H., ŞENEL C. B., KAVURMACIOĞLU L. A., Camcı C.

2nd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2016, 11 - 13 Mayıs 2016, ss.770-778

A Parametric Approach to Turbine Tip Leakage Aerodynamic Investigation for Axial Flow Turbine

MARAL H., ŞENEL C. B., KAVURMACIOĞLU L. A.

” Proceedings of the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honululu, 10 - 15 Nisan 2016

Design of A New Non Contact Screw Seal and Determination of Performance Characteristics

GİRİŞTA V., PARLAR Z., TEMİZ V., KAVURMACIOĞLU L. A.

Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT’16), prag, Çek Cumhuriyeti, 4 - 05 Nisan 2016

Numerical Solution of Flow in Open Cell Metal Foam and Comparison to Experiment

BAĞCI Ö., DUKHAN N., KAVURMACIOĞLU L. A., ÖZDEMİR M.

8th International Conference on Computational Heat and Mass Transfer, ICCHMT 8, İstanbul, Türkiye, 25 - 28 Mayıs 2015

Experimental Heat Transfer Due to High Frequency Oscillating Water Flow in 20 PPI Aluminum Foam

BAĞCI Ö., Dukhan N., ÖZDEMİR M., KAVURMACIOĞLU L. A., ARBAK A.

PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.443-449

Thermal Development of Non Darcy Water Flow in Open Cell Metal Foam Experimental Results

Dukhan N., BAĞCI Ö., KAVURMACIOĞLU L. A.

METFOAM 2015, Barselona, 31 Ağustos - 02 Eylül 2015

OTOMOTİV ÖN CAM BUZ ÇÖZME PERFORMANSININ SAYISAL OLARAKMODELLENMESİ VE BUZUN ERİMESİNE ETKİ EDEN PARAMETRELERİNİRDELENMESİ

KAVURMACIOĞLU L. A., Tatar S.

20. ULUSAL ISI BİLİMİ VE TEKNİĞİ KONGRESİ 2-5 EYLÜL 2015 (ULIBTK’xx15), Balıkesir, Türkiye, 2 - 05 Eylül 2015, ss.1167-1178

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar