SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
CHARACTERISATION AND TRIBOLOGICAL PROPERTIES OF HARD ANODISED AND MICROARC OXIDISED 5754 QUALITY ALUMINUM ALLOY
Journal of the Balkan Tribological Association
, cilt.22, sa.1, ss.233-239, 2016 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
Oxidized Titanium
MATERIALS FOR TOTAL JOINT ARTHROPLASTY: BIOTRIBOLOGY OF POTENTIAL BEARINGS
, ss.355-393, 2016 (Hakemli Dergi)
Effect of Voltage Parameters on Surface Morphology of Micro Arc Oxidized Cp Titanium
Defect and Diffusion Forum
, cilt.353, ss.211-216, 2014 (Scopus)
Effect of Process parameters on the Surface Properties of Micro Arc Oxidized 6082 Aluminum Alloy
Academic Journal of Science
, cilt.2, sa.2, ss.379-384, 2013 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
Evaluation of the Microstructure and Tribological Properties of the Micro-arc Oxidised Biomedical Titanium
6th Young Tribological Researcher Symposium, Nuremberg, Almanya, 24 - 25 Temmuz 2023, ss.11
Boriding of Ti20Nb Alloy Produced by Powder Metallurgy for Tribological Applications
INTERNATIONAL GRADUATE RESEARCH SYMPOSIUM, 01 Haziran 2022, ss.127
Improvement of Micro-Arc Oxidation Coating Formed on 7075 Al Alloy for Reducing the Coefficient of Friction
INTERNATIONAL GRADUATE RESEARCH SYMPOSIUM, 01 Haziran 2022, ss.130
Impact Sliding Wear Performances of Quenched and Tempered Hot Work Tool Steels
UDCS’xx19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019
Effect of Isothermal Annealing on Microstructure and Mechanical Properties of a High Carbon Steel
Fourth International Iron Steel Symposium, 4 - 06 Nisan 2019
Synthesis of an Antibacterial and Wear-resistant Multilayer Coating on Biomedical Titanium-based alloys
TURKEYTRIB 2018, 18 - 20 Nisan 2018
Influence of Thermal Oxidation Time on Tribology Behaviour of Ti6Al4V Alloy
TURKEYTRIB 2018, 18 - 20 Nisan 2018
Structure and Tribological Properties of Fluidized Bed NitridedSurfaces on H13 Hot Work Tool Steel
TURKEYTRIB 2018, 18 - 20 Nisan 2018
Nitriding of Inconel 713LC Superalloy via Fluidized Bed
The 2nd International Conference on Material Science and Technology (IMSTEC 2017), 11 - 13 Ekim 2017
The Influence of Trisodium Phosphate Concentration on Tribological and Corrosion Properties of MAO’ed AZ91 Magnesium Alloy
The 2nd International Conference on Material Science and Technology (IMSTEC 2017), 11 - 13 Ekim 2017
A Ceramic Coating for Corrosion Protection on AISI 316Ti Stainless Steel
The 2nd International Conference on Material Science and Technology (IMSTEC 2017), 11 - 13 Ekim 2017
Synthesis of Zirconia/Magnesia Composite Coating on AZ91 Magnesium Alloy
The 2nd International Conference on Material Science and Technology (IMSTEC 2017), 11 - 13 Ekim 2017
Wear characteristics of micro arc oxidized AZ91 magnesium alloy in a chlorine-rich environment
9th International Conference on Tribology (Balkantrib’17), 13 - 15 Eylül 2017
Formation of a wear-resistant oxide coating on high silicon cast iron by combining aluminizing and micro arc oxidation methods
9th International Conference on Tribology (Balkantrib’17), 13 - 15 Eylül 2017, ss.92
Production of a protective alumina coating on 316Ti grade stainless steel by micro arc oxidation process
9th International Conference on Tribology (Balkantrib’17), 13 - 15 Eylül 2017
Microstructural Characterization Of Micro Arc Oxidized Za-8 Zinc-Aluminum Alloy
31st International Conference on Surface Modification Technologies (SMT31), 5 - 07 Temmuz 2017
Characteristics of the Multilayer Coating Fabricated on AZ91 Alloy by Micro Arc Oxidation After Cold Spraying of Al-Cu Powder Mixture
15th International Conference on Tribology (Serbiatrib’17), 17 - 19 Mayıs 2017
Wear Characteristics of H13 Hot Work Tool Steel at Elevated Temperatures
3rd Iron Steel Symposium 2017 (UDCS’17), 3 - 05 Nisan 2017
Wear and Corrosion Resistances of Oxide Coatings formed on Magnesium Alloys by Micro Arc Oxidation
3rd International Conference on Mechanical Properties of Materials, 14 - 17 Aralık 2016
Production of a Coating Containing Ca P and Zn on AZ31 Magnesium Alloy by Micro Arc Oxidation
UNITECH'16, 18 - 19 Kasım 2016
Production Of A Coating Containing Ca P and Zn on AZ31 Magnesium
Unitech 2016, Gabrovo, Bulgaristan, 18 - 19 Kasım 2016
Characteristic of mullite based oxide coating on in situ CuAl2 reinforced aluminum matrix composite
16. International Materials Symposium (IMSP’16), 12 - 14 Ekim 2016
Microstructural investigation and wear performance of spheroidal graphite cast iron treated by a two step austempering process
16. International Materials Symposium (IMSP’16), 12 - 14 Ekim 2016
Effect of Single Step and Two Step Austempering on Microstructure and Mechanical Properties of a High Silicon Ductile Iron
International Conference on Advances in Automotive Technologies, 11 - 14 Ekim 2016
CHARACTERISTIC OF MAO COATINGS FORMED ON CuAl2 IN SITU REINFORCED ALUMINUM MATRIX COMPOSITES
IMSP 2016, Denizli, Türkiye, 12 - 14 Ekim 2016
Microstructural Investigation and Wear Performance of Ductile Irons Treated by Two Step Austempering Processes
16th International Materials Symposium IMSP'2016, 12 - 14 Ekim 2016, ss.1118-1125
Formation of a Protective Ceramic Coating on Friction Stir Welded Magnesium and Aluminum by Micro Arc Oxidation
30th International Conference on Surface Modification Technologies (SMT30), 29 Haziran - 01 Temmuz 2016
Characterization of Carbon Nanotubes Incorporated Ceramic Coatings Fabricated via Micro Arc Oxidation on AZ91D Magnesium Alloy
30th International Conference on Surface Modification Technologies (SMT30), 29 Haziran - 01 Temmuz 2016
Characterization of micro arc oxidized unalloyed low carbon steel after hot dip aluminizing process
13th International Conference of Diffision in Solid and Liquids, 26 - 30 Haziran 2016
Influence of Austempering Temperature on Microstructural and Mechanical Properties of EN GJS 500 7 and EN GJS 600 3 grades nodular cast irons
5. Isıl İşlem Sempozyumu, Türkiye, 2 - 03 Haziran 2016
Characterization and Mechanical Properties of Recovered Waste Zirconia Powders by Powder Metallurgy Technique
International Conference on Material Science and Technology, 6 - 08 Nisan 2016
Characteristics of Ceramic Coating Fabricated by Micro Arc Oxidation on Aluminized Stainless Steel
International Conference on Material Science and Technology, 6 - 08 Nisan 2016
In Situ Production and Mechanical Properties of Aluminum Matrix Aluminum Copper Intermetallic Composite
International Conference on Material Science and Technology, 6 - 08 Nisan 2016
Microstructure and Mechanical Properties of the Sintered Niobium Borides
IXth Ceramic Congress with International Participation, Afyonkarahisar, Türkiye, 26 - 28 Kasım 2015
Microstructure and Mechanical Properties of Sintered Niobium Borides
IX. Seramik Kongresi 2015, Afyonkarahisar, Türkiye, 26 - 28 Kasım 2015, ss.160
Tribological Investigation of Austempered Grey Cast Iron for Automotive Components under Dry Sliding Conditions
TurkeyTrib’15, İstanbul, Türkiye, 7 - 09 Ekim 2015
Formation of Corrosion Resistant Alumina Coating on 6061 Aluminum Alloy by the Combination of Micro Arc Oxidation and Sealing Treatments
23rd International Conference on Materials and Technology, Izola, Slovenya, 27 - 30 Eylül 2015
Formation of bio compatible titanium di oxide layer onto 316L stainless steel substrate
11th International Conference on Diffusion in Solids and Liquids, Munich, Almanya, 22 - 26 Haziran 2015
Antibiotic loaded micro porous oxide coatings for titanium based biomedical implants
eCM XVI - Bone and Implant Infection, Chur, İsviçre, 24 - 26 Haziran 2015
Characterization of complex coatings deposited by micro arc oxidation on Ti6Al7Nb alloy
Unified Scientific Approaches Towards Regenerative Orthopaedics and Dentistry, 25 - 27 Mart 2015
Characterization and Wear Properties of Carbon Nanotubes Incorporated Ceramic Coatings on Ti6Al4V and Ti6Al7Nb Alloys
IMSP 2014, 15th International Materials Symposium (IMSP’2014), 15 - 17 Ekim 2014
Micro Arc Oxidation of AZ91 Mg Alloy in Silicate Electrolyte Effect of Electrical Parameters
ISTS’2014, 2nd International Surface Treatment Symposium, İstanbul, Türkiye, 25 - 27 Haziran 2014
Effect of Process Parameters on the Surface Properties of Micro Arc Oxidized 6082 Aluminum Alloy Bu bildiri Academic Journal of Science dergisinde basılmıştır Academic Journal of Science 2 2 379 384 2013
International Journal of Art and Science, Prag, 28 - 31 Mayıs 2013