Optimization of surface roughness in drilling using vegetable-based cutting oils developed from sunflower oil

Ozcelik B., Kuram E., Demirbas E., Sik E.

INDUSTRIAL LUBRICATION AND TRIBOLOGY, cilt.63, sa.4, ss.271-276, 2011 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 63 Sayı: 4
  • Basım Tarihi: 2011
  • Doi Numarası: 10.1108/00368791111140486
  • Dergi Adı: INDUSTRIAL LUBRICATION AND TRIBOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.271-276
  • Anahtar Kelimeler: Steel, Oils, Surface-roughness measurement, Fluids, AUSTENITIC STAINLESS-STEEL, METAL-MATRIX COMPOSITES, MINIMUM QUANTITY, FLUIDS, PERFORMANCE, LUBRICANT, EMULSIONS, ALLOYS, TOOL
  • İstanbul Teknik Üniversitesi Adresli: Hayır

Özet

Purpose - The purpose of this paper is to investigate the performance of four cutting oils, two different vegetable-based cutting fluids developed from refined sunflower oil and two commercial types (semi-synthetic and mineral), for surface roughness during drilling of AISI 304 austenitic stainless steel with HSSE tool.