A Monte-Carlo Simulation for the Estimation of Side-by-Side Loading Events on Oregon Bridges


YANIK A., Higgins C.

Journal of Polytechnic, cilt.23, sa.1, ss.53-60, 2020 (ESCI) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 23 Sayı: 1
  • Basım Tarihi: 2020
  • Doi Numarası: 10.2339/politeknik.469495
  • Dergi Adı: Journal of Polytechnic
  • Derginin Tarandığı İndeksler: Emerging Sources Citation Index (ESCI), TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.53-60
  • Anahtar Kelimeler: Bridge, civil engineering, highway, monte carlo simulation, side-by-side loading, GROUND MOTION
  • İstanbul Teknik Üniversitesi Adresli: Evet

Özet

Obtaining the side-by-side probabilities accurately is a very important procedure during two lane loaded live load factor analysis. To calculate the load factors properly, side-by-side loading events should be investigated very carefully. This study presents a statistical method to investigate the side-by-side events on the Oregon bridges. Numerical simulations were performed for this investigation. These simulations were developed in MATLAB. Gross vehicle weights (GVW) of the trucks were used during the analysis. Monte Carlo simulations were performed to analyze side-by-side loading events. Degree of correlation coefficient of GVW for side-by-side trucks were also obtained from Monte Carlo simulations. 290 bridges located at the prescribed mile markers on Interstate-5 (I-5) southbound on Oregon highways and 1-year of Oregon state-specific weigh-in-motion (WIM) data were used. 75,000 trucks were randomly selected from 1,787,612 trucks that correspond to 1-year WIM data from Woodburn NB traffic site that is located in Oregon. Inverse standard normal distribution functions and cumulative distribution functions of the truck data were generated. With respect to the statistical analysis, side-by-side loading probabilities were found to be smaller than the ones presented in American Association of State Highway and Transportation Officials LRFD calibration.