Combinations of synergistic interactions and additive behavior during the co-oxidation of chars from lignite and biomass


Haykiri-Acma H., Yaman S.

FUEL PROCESSING TECHNOLOGY, cilt.89, sa.2, ss.176-182, 2008 (SCI İndekslerine Giren Dergi) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 89 Konu: 2
  • Basım Tarihi: 2008
  • Doi Numarası: 10.1016/j.fuproc.2007.09.001
  • Dergi Adı: FUEL PROCESSING TECHNOLOGY
  • Sayfa Sayıları: ss.176-182

Özet

The aim of this study is to investigate the co-combustion behavior of two different pyrolytic chars. For this purpose, Elbistan lignite and woody shells of hazelnut were pyrolysed in a tube furnace by heating to 900 degrees C with a heating rate of 40 degrees C min-(1) under dynamic nitrogen flow of 400 mL min(-1) to obtain pyrolytic char. These chars were mixed to obtain blends having the biomass char in the ratios of 5, 10, and 20 wt.%. Non-isothermal DTA and TGA profiles of the chars were obtained from ambient to 900 degrees C with a heating rate of 40 degrees C min(-1) under the static ambient atmosphere. DTA and TGA profiles of the blend chars were interpreted considering the thermal characteristics such as ignition point, burnout at a given temperature, maximum burning rate, the end of combustion etc. Relations between the fraction of the biomass char in the blends and the thermal behavior of the blends were evaluated according to the synergistic approach. It was found that addition of biomass char led to important variations in some thermal properties which can not be explained by the additive behavior. However it can be concluded in general that the combinations of synergistic interactions and additive behavior govern the thermal properties of the blend chars during co-oxidation. (c) 2007 Elsevier B.V. All rights reserved.