Evaluation of advanced oxidation processes for the treatment of nanofiltration membrane concentrate considering toxicity and oxidation by-products

Balcik-Canbolat C., Ölmez Hancı T., Sengezer C., Sakar H., KARAGÜNDÜZ A., KESKİNLER B.

WATER SCIENCE AND TECHNOLOGY, cilt.81, sa.12, ss.2488-2500, 2020 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 81 Sayı: 12
  • Basım Tarihi: 2020
  • Doi Numarası: 10.2166/wst.2020.314
  • Dergi Adı: WATER SCIENCE AND TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Agricultural & Environmental Science Database, Analytical Abstracts, Aqualine, Aquatic Science & Fisheries Abstracts (ASFA), BIOSIS, Biotechnology Research Abstracts, CAB Abstracts, Chimica, Compendex, EMBASE, Environment Index, Geobase, MEDLINE, Pollution Abstracts, Public Affairs Index, Veterinary Science Database
  • Sayfa Sayıları: ss.2488-2500
  • İstanbul Teknik Üniversitesi Adresli: Evet

Özet

This paper offers a feasible solution for the treatment of membrane concentrate produced from the textile industry, using the Fenton, Advanced Fenton (AF), ozonation and hydrodynamic cavitation (HC) and combination of these processes. The study investigated the optimum oxidant and catalyst concentrations, optimum operational conditions and comparison of these processes. The potential formation of chlorinated organic compounds after oxidation of membrane concentrate was also investigated by analyzing total organic halogen (TOX) and polychlorinated biphenyl (PCBs). Also, toxicity analysis was performed withVibrio fischeriphotobacteria to identify the production possibility of oxidation intermediates that are more toxic and difficult to treat than the targeted contaminants. Maximum removal efficiencies in chemical oxygen demand (COD) and color were 18.8% and 60.7% respectively using HC alone at a cavitation number (CN) of 0.1. Maximum COD, total organic carbon (TOC), and color removal efficiency at molar concentrations of 175 mM H(2)O(2)and 35 mM Fe(2+)and pH 3 after 30 min was 87.1, 80.8 and 99%. Combined HC with Fenton showed the highest removal efficiency in terms of COD, TOC, and color. It was also stated that the use of high oxidant concentrations masks the synergistic effect of HC on Fenton processes due to the scavenging effect.