Copper matrix composite coatings produced by cold spraying process for electrical applications


Tazegul O., DYLMISHI V., Çimenoğlu H.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, cilt.16, sa.3, ss.344-350, 2016 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 16 Sayı: 3
  • Basım Tarihi: 2016
  • Doi Numarası: 10.1016/j.acme.2016.01.005
  • Dergi Adı: ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.344-350
  • Anahtar Kelimeler: Cold spray, Copper, Composite, Conductivity, Wear, MECHANICAL-PROPERTIES, TRIBOLOGICAL BEHAVIOR, MICROSTRUCTURE, NANOCRYSTALLINE, DEPOSITION, PRESSURE, FRICTION
  • İstanbul Teknik Üniversitesi Adresli: Evet

Özet

Composite coatings were deposited on commercially pure copper substrates by cold spraying of feedstock consisted of copper and Al2Cu powders. The amount of the Al2Cu powder incorporated in the feedstock varied in between 0 and 15 vol.%. Characterisations of the coatings were done by microstructural examinations, hardness and electrical conductivity measurements and wear tests. Composite coatings deposited from the feedstock containing 5 and 10 vol.% Al2Cu powder exhibited better electrical conductivity and superior wear resistance than the monolithic (Al2Cu free) copper coating. Presence of 15 vol.% Al2Cu in the feedstock diminished both the wear resistance and the electrical conductivity of the coating. (C) 2016 Politechnika Wroclawska. Published by Elsevier Sp. z o.o. All rights reserved.