Macroporous styrene-divinylbenzene copolymers: Formation of stable porous structures during the copolymerization


ERBAY E., Okay O.

POLYMER BULLETIN, cilt.41, ss.379-385, 1998 (SCI İndekslerine Giren Dergi) identifier identifier

  • Cilt numarası: 41 Konu: 3
  • Basım Tarihi: 1998
  • Doi Numarası: 10.1007/s002890050377
  • Dergi Adı: POLYMER BULLETIN
  • Sayfa Sayıları: ss.379-385

Özet

The variation of the pore structure of styrene-divinylbenzene (S-DVB) copolymer beads depending on the polymerization time was investigated. Macroporous S-DVB copolymer beads with 10 mol % DVB content were prepared in the presence of cyclohexanol as a diluent. It was found that the stable pores in S-DVB copolymers mainly form at an early stage of the copolymerization, i.e., at the gel point. Thus, the early phase separated portions of the network, where the crosslink density is locally high, do not collapse on drying and illustrate the stable part of the porosity of S-DVB copolymers. The number of stable pores does not change much during the whole course of the copolymerization. The maximum porosity first decreases on rising the post-gelation time due to the decreasing degree of dilution of the gel phase. Then, it increases continuously due to the increasing crosslink density of the gel. The pores formed at a later stage of the copolymerization are unstable and they collapse during the drying process. This is due to the lower crosslink density of the network regions forming later.