An adaptive control application in a large thermal combined power plant


Kocaarslan İ. , Cam E.

ENERGY CONVERSION AND MANAGEMENT, vol.48, no.1, pp.174-183, 2007 (Journal Indexed in SCI) identifier identifier

  • Publication Type: Article / Article
  • Volume: 48 Issue: 1
  • Publication Date: 2007
  • Doi Number: 10.1016/j.enconman.2006.04.014
  • Title of Journal : ENERGY CONVERSION AND MANAGEMENT
  • Page Numbers: pp.174-183
  • Keywords: energy application, power plant, real-time application, model reference adaptive control, GENERATION

Abstract

In this paper, an adaptive controller was applied to a 765 MW large thermal power plant to decrease operating costs, increase quality of generated electricity and satisfy environmental concerns. Since power plants may present several operating problems such as disturbances and severe effects at operating points, design of their controllers needs to be carried out adequately. For these reasons, first, a reduced mathematical model was developed under Computer Aided Analysis and Design Package for Control, (CADACS), so that the results of the experimental model have briefly been discussed. Second, conventional PID and adaptive controllers were designed and implemented under the real-time environment of the CADACS software. Additionally, the design of the adaptive model-reference and conventional PID controllers used in the power plant for real-time control were theoretically presented. All processes were realized in real-time. Due to safety restrictions, a direct connection to the sensors and actuators of the plant was not allowed. Insted a coupling to the control system was realized. This offers, in addition, the usage of the supervisiory functions of an industrial process computer system. Application of the controllers indicated that the proposed adaptive controller has better performances for rise and settling times of electrical power, and enthalpy outputs than the conventional PID controller does. (c) 2006 Elsevier Ltd. All rights reserved.