A comprehensive study on the synthesis, characterization and mathematical modeling of nanostructured Co-based catalysts using different support materials for AB hydrolysis

Çelik Kazıcı H., Izgi M. S., Sahin Ö.

CHEMICAL PAPERS, cilt.75, sa.6, ss.2713-2725, 2021 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 75 Sayı: 6
  • Basım Tarihi: 2021
  • Doi Numarası: 10.1007/s11696-021-01514-0
  • Dergi Adı: CHEMICAL PAPERS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chemical Abstracts Core
  • Sayfa Sayıları: ss.2713-2725
  • Anahtar Kelimeler: Nanoparticles, Modelling, Hydrophilic polymers
  • İstanbul Teknik Üniversitesi Adresli: Hayır

Özet

The present work includes the synthesis of aluminum oxide (Al2O3), multi-walled carbon nanotube (MWCNT), and Eupergit CM-supported Co-based nanoparticles (Co-Fe-B and Co-Mn-B), and the investigation of their hydrolytic efficiency in H-2 generation from the catalytic hydrolysis of ammonia borane (NH3BH3). Among the supported catalysts, Co-Fe-B/Eupergit CM exhibited the highest H-2 generation rate as 4539 mLmin(-1)g(catalyst)(-1) compared to Co-Fe-B/Al2O3 and Co-Fe-B/MWCNT, which exhibited 4373 mLmin(-1)g(catalyst)(-1) and 3294 mLmin(-1)g(catalyst)(-1), respectively. When Co-Mn-B/ Eupergit CM was used instead of Co-Fe-B/ Eupergit CM, a significant increase in the highest HGR (19.422 mLmin(-1)g(catalyst)(-1)) was found. Moreover, turnover frequency (TOF) value was calculated as 318 h(-1) and 646 h(-1) for Co-Fe-B/Eupergit CM and Co-Mn-B/Eupergit CM, respectively.